Heating boilers danko: worthy representatives of the economy

Among the whole variety of heating devices, it is particularly worth highlighting the products of domestic companies, as well as products of manufacturers from neighboring countries. This category includes electric, solid fuel and gas boilers heating Danko. Manufactured at Ukrainian enterprises, these units provide for quite efficient heating of premises, while being distinguished by quite acceptable reliability and performance.

Below we describe the features of the production of boilers, as well as describe the most popular product lines in the range.

General characteristics of products

The manufacture of heating boilers Danko engaged Ukrainian company "Agroresurs". The production activity of the enterprise started in 2003, when the first batch of heating installations for private houses was launched on the market.

Note! Today, the number of manufactured units exceeds half a million, and they can be purchased both from the manufacturing company itself and from dealers in the Russian Federation, Belarus, the Baltic countries, etc.

The main characteristics of products from the company "Agroresurs" will be the following:

• A wide range of products - more than 300 modifications of heating boilers, as well as a line of convectors, radiators and HVAC equipment.
• Own production capacity - all devices are assembled at full-cycle enterprises, excluding some adjustment units (they are purchased from European manufacturers of consumer electronics).
• The ability to choose the power installation. The product line includes both compact water heaters of 2 kW and full-sized boiler installations of 120 -140 kW. The efficiency of most of them reaches 93 -95%.

• Compliance with safety standards. In the production of control and control units, Italian, German and Dutch technologies are used, which helps to protect the automation of the boiler from failures and reduce the risk of an emergency.
• Use of own innovative developments. In the manufacture of boilers, heat-resistant steels are used, designed and manufactured at the facilities of Agro Resource plants.

Among other advantages of these devices, an acceptable price deserves mention: due to the use of modern technological solutions and the use of domestic materials, there are very wide possibilities for saving not at the expense of quality.

And yet, before you purchase a Danko boiler, you should carefully study the range: only this way we can be sure that we have found a model that suits us in all respects. Moreover, it will be necessary to study a fairly large array of information, and therefore we systematized the main information in the next section.

Assortment analysis

Electric models

If you need to equip the cottage heating or a small country house, and you plan to do most of the installation work yourself, then the best choice would be to buy one of the electric boilers.

For products from this line are characterized by the following parameters:

• Power - from 3 to 18 kW. Electric boilers Danko can not boast of high performance, because installing them in large houses is not worth it.
• The product line includes both single-phase (from 3 to 6 kW) and three-phase (9-18 kW) models.

• Forced circulation of the coolant. The devices are equipped with built-in or external heating circulating pumps, which ensures even water flow even along a very long heating circuit.

Note! Taking into account the pump performance, the instruction allows using not only water, but also special antifreezes in the system. These compounds are more viscous, but do not freeze at low temperatures.

• The maximum water temperature at the outlet is +85⁰C. It is quite enough to warm a large room without damaging polymer pipelines and valves.

Gas devices

The range of gas boilers Danko is quite extensive.

It includes:

• Wall models are compact, economical and convenient to use. Similar units are used in the same place as electric water heaters - in small private houses and apartments with independent heating. Boilers can be used in both open and closed systems. The greatest demand is for models with a capacity from 20 to 25 kW.

• Floor models equipped with pumps "Rivneterm." Usually require a chimney, equipped with a second circuit for heating hot water. High-quality automation is installed on this line of cats, which controls the functional parameters of the device and disables it in case of malfunctions.
• Steel models with power from 8 to 25 kW. They are used in the same place as the products from the previous categories; they are completed with productive turbines for the forced diversion of combustion products.

• Cast iron boilers with an open chamber. They are used for heating technical premises, equipped with a gas supply adjustment system and forced smoke removal. The efficiency of the devices is about 90%, and the maximum power is 50 kW.

Solid fuel boilers

A separate category of products consists of solid fuel boilers Danko. They can be used both for heating residential premises and for ensuring an optimal microclimate in warehouses, workshops, etc.

For solid fuel models, the following are typical:

• The main type of fuel is coke, lignite, firewood. You can also purchase modifications that are optimized for burning sawdust, chips, pellets and briquettes, pressed peat, etc.

Tip! Before you make the final choice, carefully review the specification of the model you like to determine which fuel is best used for maximum heat transfer from the boiler.

• Most models support long-term combustion with the mandatory afterburning of the flame, which makes it possible to increase the efficiency to the maximum possible performance.
• The products can be installed automatic regulating equipment, as well as bunkers for supplying fuel to the furnace. The use of these modifications makes the operation of the boiler much more comfortable.
• Like gas models, solid fuel boilers require connection to the chimney.

If we consider that the overwhelming majority of products are dual-circuit devices, i.e. provide both heating and hot water supply, the choice in favor of solid fuel assemblies becomes quite understandable.

Conclusion

Heating gas boilers Danko, as well as their electric varieties and devices that run on coal or wood, have already shown their efficiency and reliability. Of course, in terms of functionality and design, it is quite difficult for them to compete with products of Italian or German manufacturers, but in their price segment they have excellent potential for occupying a leadership niche.

You will receive more detailed information on these products by viewing the video posted on the page.