Heating furnaces ermak and their features

On country houses and country houses, wood heating is still one of the most common. In particular, the Yermak wood-burning stoves are very popular in the domestic market. In this article we will consider their device and get acquainted with the main features.

About the manufacturer

The history of Ermak began in the 1997th year with the formation of the eponymous trading house, which was engaged in the implementation of bath furnaces manufactured by the Kirov machine-building enterprise. At that time, the range of these products was small, however, the desire to expand and improve dictated the reorientation of the trading house to a manufacturing enterprise.

Accordingly, the range of products sold was expanded. Moreover, during its development, the company Ermak focuses primarily on the principles of reliability, availability and functionality, and this has earned a good reputation.

Today, the Yermak brand employs a number of manufacturing enterprises, expert and research organizations, design bureaus and even advertising agencies located in different cities of Russia.

Types of furnaces Ermak

To date, the range of heating furnaces is quite extensive, however, it is based on two model lines:

Below we take a closer look at the features of each type of furnace.

Stoker long burning stoves

All Stoker series units are a new generation of wood-burning stoves. These devices are characterized by maximum efficiency and cost effectiveness.

The peculiarity of their design lies in a two-chamber firebox, which provides two modes of operation:

• Fast heating - fuel is put into the lower firebox, which quickly burns through. As a result, the room is quickly heated, but most importantly - the heating chamber is heated to the required temperature.
• Temperature mode - fuel is once again put into the preheated firebox and all valves are closed, with the result that the gasification process begins (under the influence of high temperature and with a lack of oxygen, the wood decomposes into charcoal and gas) The selected gas burns in the upper firebox, thereby maintaining a constant temperature. Moreover, this process is very long and can take, as mentioned above, up to 12 hours.

Note! Long burning stoves can operate exclusively on wood fuel.

It must be said that the high efficiency of these apparatuses is connected not only with the gas generation process, but also with the special design of the furnace itself - the air pipes pass through the combustion chamber. They draw in cold air, which, as it moves upward, heats up and can reach temperatures of up to 150 degrees.

Thus, the heating of the room is carried out not only due to heat transfer, as is the case with a conventional stove, but also by convection.

Other features of Stoker stoves include:

• In the furnace, there is a clear distribution of temperature loads, in particular, a special flame cutter reduces the negative impact of high temperature on the chamber walls. This allows you to extend the life of the device.
• The devices have an ergonomic shape, so that the design can be placed even in a small room.
• Strict and at the same time quite attractive design looks harmonious in any interior.
• The model range includes devices of different power, which allows you to choose the device for rooms of different sizes.
• Simple instruction manual.

Thus, Stoker appliances are an excellent choice in the case when the main task of the stove is heating the room. (See also article.)

Heating and cooking stoves

Heating and cooking stoves, unlike gas generators, are more functional devices. They effectively cope with the task of heating the room, as they have convection channels. According to information from the manufacturer, these heating stoves can be used to heat houses up to 150 square meters, which is enough for most country houses.

However, the design has a hot plate, which allows using it for cooking. It should also be noted that most of these devices are made in the form of fireplace stoves, i.e. The combustion chamber is located behind the heat-resistant glass, which allows you to observe the fire while the furnace is operating.

Tip! An alternative to products from the company Ermak is a heating oven Cinderella and Barbara, who also proved themselves well.

Among the features of these devices are:

• Compact size;
• In their manufacture, modern technologies of welding, bending, etc., are used, which ensures the strength and durability of products.
• Attractive design, thanks to which the stove can be an interior decoration. For example, the same heating furnace Barbara looks less attractive.
• Depending on the model, the hob allows you to install from one to several units of dishes.

The only drawback of these devices, in contrast to Stoker furnaces, is the absence of a gas generation mode, respectively, they require a much larger amount of fuel.

Here, in fact, all the features of heating furnaces from the company Ermak.

Conclusion

Heating furnaces of the Russian manufacturer Yermak meet all modern standards and are not inferior to similar products from foreign manufacturers, while their price is much lower. Thus, they are an excellent choice for owners of country and country houses.

From the video in this article, you can pick up some additional information on this topic.