Solid fuel boiler buderus - independent heating in any part

Power lines and gas mains are, as a rule, in large settlements and their surroundings. If they are located at some distance from the site, then the cost of connection may be a very large sum. By installing solid fuel boilers Buderus, you can solve the problem of heating a residential or country house.

Positive qualities of the device

Products of this type are produced by the German company of the same name, which began its activities in 1731 with the manufacture of pig iron for further processing. At the end of the XIX century, the company began to produce sectional boilers for heating systems. Such a long period of existence indicates the seriousness of intentions in the field of thermal technology.

If we talk about the advantages of devices for heating the coolant, then first of all it is necessary to select the most basic of them.

• Long period of operation provided by the design itself, which implies a slight tension of the base unit.
• High efficiency units allows you to organize the most efficient heating systems for homes and technical premises.
• High quality equipment due to accumulated experience in the field of heating devices.
• In connection with a wide range of products you can choose the right product for a specific situation without much difficulty..
• The price of products varies in a fairly decent range., thanks to which the number of consumers is large.
• High security provides an opportunity to avoid situations that could cause a fire.
• Thanks to the ease of installation, all the work can be done by hand., thereby saving financial resources.
• Long burning achieved through the design features of devices.

Note! An additional advantage of the Buderus solid fuel boilers is the ease of maintenance. All the details of the device are thought out to the smallest detail.

Perspective device types

The most familiar products are designs with natural and forced pitch. In the first case, the air comes directly from the room, and in the second - from the street with the help of a special fan for the boiler. However, at present, devices of other types have appeared that can burn a single fuel bed for a long time.

Pyrolysis devices

In models of this type, combustion takes place in separate chambers, that is, the process of decomposition and partial gasification takes place directly under the action of heating.

Pyrolysis boilers place high demands on the fuel in terms of moisture. For firewood, this value varies between 20-35 percent.

In the first chamber, there is a lack of oxygen, so that one load burns long enough. Gases released in the process of burning fuel, burn down in another compartment. In such furnaces, aerodynamic drag is usually created; for this reason, many models have forced traction.

Long burning boilers

In the chambers of such products burning takes place from top to bottom, which can be achieved with a point supply of heated air. This method allows to achieve the most complete combustion of fuel.

The following are the features that are inherent in this technology.

• The burning of combustible materials is carried out directly on the deaf pallet, and not on the grate. Ashpot is completely absent.
• The air supply unit is movable. In the process of burning it relies on fuel. As it burns, lowering occurs.
• Near the compartment, where the afterburning of volatile components occurs, there is a thrust regulator capable of determining the degree of heating of the coolant.
• Exhaust gases along with ash fall into the upper compartment of the furnace, which is separated from the main chamber by a metal disk.

Attention! The period of operation of the heater long-burning without additional bookmarks is determined by the dimensions of the furnace. Speaking theoretically, the more it is not limited.

The simplest solution

Individual attention should be given to solid fuel boilers Buderus Logano S111-2, as they are the easiest option for residential premises and buildings for other purposes. They can be used as a separate installation or in conjunction with other heating equipment that operates on other types of fuel.

These units are ideally suited for both domestic heating systems with natural circulation and forced networks. Due to their small size, they can be installed even in small rooms. The device provides protection against overheating.

As for performance, there are 7 sizes, the power range of which varies between 12-45 kilowatts. The duration of burning is ensured by the impressive size of the main chamber and ashpit. During operation, almost any solid fuel can be used. However, there are separate models designed for burning wood.

The warranty obligations of the manufacturer are two years from the beginning of use, but it should not exceed 27 months from the date of shipment from the main warehouse.

Acquaintance with specifications

Below are the main parameters of the products of the most popular “Logano” series. Information is provided in the form of a comparative table to make it easier to make a choice. All models are made of steel or cast iron, as these materials have the most suitable properties.

Having made preliminary calculations of the heating system for the building, it is possible to get acquainted with the technical data of the boilers.

Recommendation! In the operation of boilers operating on solid fuels, it is necessary to use wood, the humidity of which does not exceed 20 percent. Otherwise, the power of the devices will be noticeably reduced.

As a conclusion

After getting acquainted with the above information, it should become clear what constitutes the solid fuel boiler Buderus, which is one of the sales leaders all over the world. In order for the unit to serve a long period of time without any additional investments, the installation and operating instructions must be strictly followed. Other interesting product information is contained in the video.