What are the characteristics and advantages of heating

One of the main parameters when choosing a radiator for a heating system is its ability to withstand the planned pressure. Therefore, experts recommend to buy aluminum or steel for autonomous schemes, cast-iron or bimetallic for central heating. On the latter, in particular on the radiators Rifar, we will talk further.

You will learn about them in more detail, and we will also tell you how to select them correctly for the heating system.

General information

The Russian manufacturer, Rifar, offers consumers a wide range of high-quality sectional radiators. Products are made on modern equipment, after which they are tested according to a complex procedure. The design is thought out to the smallest detail, and the use of the most efficient materials allows the equipment to have high heat transfer rates and low inertia.

Bimetallic radiators for Rifar heating systems are designed to meet the conditions of our harsh climate, so they do a good job with their task in Russian realities. In addition, they gained popularity in the CIS countries, where buyers were attracted by the quality of models and reasonable price. For example, Rifar 500 radiators are offered by the trade networks of Belarus, Kazakhstan, Ukraine and other countries.

In addition to bimetallic models, aluminum batteries are also made. Each type has its own specifications and features.

Tip: when choosing heaters, pay attention not only to their cost, but also to the needs, as well as the capabilities of the models.

Features and advantages of products

This type of heating equipment has a lot of advantages, because of which it has become widely demanded among the buyers of such products. Consider them in more detail:

Design

Consider it on the example of the model - Base 500:

1. The radiator is considered one of the most powerful among bimetallic heating devices.
2. The instruction recommends using it in poorly insulated and spacious rooms, since the model copes well with the task.
3. The main advantage of the product is high heat transfer.
4. The model has rather large dimensions and can accommodate a large amount of coolant. This ensures the ability of enhanced space heating.
5. The radiator section is made of steel pipe, filled under high pressure with aluminum alloy. This ensures durability and reliability of the design, as well as effective heat transfer.

Appearance

The elegant design of radiators is distinguished by its modern stylish design, which makes it possible for them to easily fit into different interiors. It favorably distinguishes them from products of the old sample. The design and good technical characteristics of the equipment allow the company to be one of the market leaders.

At the request of the customer, the heater can be painted in any color. Thanks to modern materials can pick up almost any shade. This allows you to install models in any, even the most sophisticated interior.

How do they differ from other models?

The above model of the bimetallic radiator “Rifar” Base is only one of the variants of the rich product range of the Russian manufacturer.

Tip: Each option has its own characteristics and advantages, so we recommend a comparative analysis before choosing.

1. The Base model will be an ideal choice for rooms with a large area, as well as where there are problems with thermal insulation.
2. "Rifar" Monolith has even better performance, so these models are recommended to be installed in the most severe conditions.
3. The level of heat transfer and power in most cases depends on the number of sections. For example, the Base 500 has more of them than the Base 350 and other models in a number, so the heating of the air in the room is much faster.

1. Installing batteries is carried out in different ways. The release of models with lower and upper outputs is adjusted. An example in the first case is the Base Ventil radiator, whose heat transfer can be regulated by a thermostatic head.

We select the number of sections

The power of the product can reach up to 2.4 kW, so the necessary battery should be chosen from the area of ​​the heated room.

There are two ways to do this:

1. Use the services of specialists who, for a certain remuneration, make an ideal calculation, independently, in a private cottage with individual heating or in an apartment of a multi-storey building with a central one.

1. Do it yourself. Although the result will not be as accurate as in the first case, its results are quite enough to select the optimal configuration.

To do this, we use the standard value - the thermal capacity required to heat 1 m² the premises. There are 3 options:

• 1 external wall and 1 window facing the street - ceiling 2.5-2.7 m, for heating 1 m² need 100 watts. Multiply area by 100 watts;
• 2 exterior walls and 1 window facing the street. Standard ceiling height, required power 120 watts / m². The result obtained in the first case should be divided into the heat capacity of the section in order to determine their number. The result is rounded up;
• 2 windows and 2 walls face out. Standard power - 130 watts / m². Standard ceilings. The problem is solved in the same way as in the previous method.

Conclusion

All models of Rifar radiators comply with safety quality standards, as they were designed taking into account Russian realities of operation. In addition, the manufacturer has insured its products against all risks at Ingosstrakh. You just have to choose the right battery for your premises.

The video in the article will help you find additional information on this topic.