What to choose electric heating boilers to give
Finding a gasified free plot for building a house in the country is more difficult than with electricity. Even if the “blue fuel” highway passes nearby, connecting to it can take a lot of time and money.
Another thing - an electric boiler, which can be installed in a private house without any permits. The main thing is not to exceed the limits on electricity allocated for the site and to make the appropriate equipment power wiring.

Today in the article we will consider the types of electric boilers for a private house, their use and the dignity of the models. You will need only to pick up the option corresponding on power and to establish it in a convenient place.
Construction of domestic electric boiler
Any electric boiler consists of such elements - a housing, a control unit and a heat exchanger with heating elements. Unlike other devices of the same purpose, it does not need the constant presence of people and cleaning. In addition, you do not have to build additional communications, storage facilities and separate rooms, so the cost of installing the equipment will be significantly lower.
In a big city where harsh environmental regulations are applied, electric heating will be very profitable. For example, during its operation no noise and vibrations are observed, there is no need to worry about gas leakage, it is enough to follow the usual fire safety standards.

How to choose
When choosing equipment, the following factors should be considered:
Connection | For domestic needs, electric boilers are produced in 2 versions - single-phase and three-phase. Know if the power of the equipment will be above 12 kW, it will always be 3-phase. |
Installation | Equipment can be installed:
The instruction recommends using it in:
|
Circuit | The equipment differs in the number of circuits, which can be:
|

Devices can be the main source of thermal energy or be additional in systems with a boiler operating on:
- Solid fuel - coal, wood or peat.
- Gaza.
They can also be used in the organization of a heated floor and in solar systems.
Kinds
There are several options for electric boilers, which differ in the method of heating water:
- The main heating element - TEN. Usually it is with such we meet when meeting with this type of heating. The work of heaters resembles a traditional boiler. Although they are energy efficient, they are exceptionally reliable. Automation allows you to adjust and maintain the desired temperature in the circuit.

- The electrode version of the equipment differs from the previous one in low power consumption due to a slightly different principle of operation. Such devices produce water heating by passing an alternating current through it. The equipment is also equipped with automatics, which turns it off in case of short circuit, leakage or elevated temperature of the coolant. In size, boilers of this type are significantly smaller than previous devices.

Tip: for normal operation of the electrode boiler coolant must have certain characteristics. Otherwise, no effect from its use will be obtained.
- Induction type electric heating boilers for giving is advantageous in its application. The equipment can be used both for heating buildings of a large area, and for running hot water. The devices do not represent a danger during operation, do not harm the environment, because they do not emit harmful substances during operation. Heating boilers in double-circuit design are able to function in automatic mode without the help or intervention of a person. (See also the article Electric heating convectors: features.)

Tip: to reduce the cost of operating an electric boiler of any type, we recommend installing programmers and other similar devices. Thanks to this, it is possible to cut costs without losing heating efficiency by almost 30%
If you have enough knowledge and skills, installation of such equipment can be done by hand. Otherwise, it is better to entrust this work to specialists, which will ultimately be more profitable, since they will install and adjust the electric boiler and additional equipment in a short time.
Advantages of electric heating
To appreciate all the advantages of electric heating for a private house, it is necessary to compare it with another type. For example, with a centralized, gas or solid fuel, then a lot of positive qualities will be revealed as widely as possible.
Consider the advantages of electrical space:
- Efficiency - Strange as it may sound, but the cost of electricity is not increasing as quickly as coal, gas or diesel. So you can confidently say that this option for heating homes for a long time will remain the most economical.
- Efficiency - electric heating is enough to easily provide any house with the necessary amount of heat, even in the most severe frosts. You only need to choose the right equipment and insulate the housing.

- The range of boilers today is quite large., therefore, you can easily find the one that will be most appropriate in your version. This concerns both its cost and technical characteristics. You will be able to install heating at any object for small funds. Only need to decide on the type of equipment.
- Installation and operation does not pose any problems.. Installation is made in a short time and does not require additional devices such as chimney installation. Maintenance of the boiler also does not require special actions.
- The appearance of the equipment can be chosen to suit the style of the room. Unlike other boilers, electric not only fully meet all modern requirements for the operation of such equipment, but also look beautiful.
Conclusion
The cost of electricity does not increase as quickly as it can be seen from the prices of other fuels. As a result, the use of boilers running on electricity is becoming increasingly cost-effective. It remains only to choose the right equipment for the power and build the appropriate communications. The video in the article will help you find additional information on this topic.