Create an original decor: a vase made from a pipe with your

After repairs, there is always a lot of garbage left in the house, but you shouldn’t rush to throw it away, as there will surely be some interesting items among it that, after decorating, can look like excellent accessories. Examples of this are pipes that can be turned into stunning vases. Next we will look at several ways to do this.

Vases from plastic pipes

Decoration stockings

First of all, we will look at how a vase made of plastic pipe is made by hand. For these purposes it is best to use a sewer pipe.

So, the instruction looks like this:

• If there is a segment longer than 60 cm, it should be divided into 3 parts..
• Next, the ends of the blanks need to be cut obliquely..
• Then it is necessary to soak the stockings with PVA glue and squeeze out the excess suspension..
• After that, the stockings need to be pulled on the pipes so that the result is twisted folds.. In this form, the product must be left until the glue dries.
• Further actions depend solely on your imagination, for example, products can be painted with different colors and glued together. For stability, a cardboard circle or square can be glued to their bottom. As a decor of crafts, an excellent option is beads, beads, small seashells, etc.

The result will be a very beautiful product that will look expensive, despite the fact that the price of materials is minimal.

Combined decoration

The technique of the product in this case does not differ from the above. The differences lie only in the way of decoration.

The process is as follows:

• Stockings are stretched from the bottom and from the top of the blanks, and in the middle there remains a “bare” patch.
• The space between the stockings must be smeared with white glue.
• Next, the surface treated with glue should be sprinkled with grits. What exactly - you decide to your taste.

• After the glue hardens, the blanks need to be glued together and painted. For stability, you can make a cardboard stand and paint it in a suitable color.

The process of manufacturing the product is completed.

Metal pipe

If the edges of a metal pipe are exactly sawed off, then it is also suitable for our purposes. The best option is to prepare a pipe with a flange, since the product will be obtained immediately with the stand.

Below we will consider one of the options of how a floor vase is made with your own hands from a pipe of this type:

• First of all, it is necessary to paste over the blank with ordinary toilet paper. At the same time small folds are allowed.
• Then apply two layers of black ink on the paper.
• After that, on top of the black paint you need to apply varnish with bronze powder.
• Additionally, the product can be decorated with beads or glass beads.
• To perform the bottom, you need an installation foam. The craft should be put on a plastic stand and a stream of foam down. When the foam hardens, it can be toned with paint from a can.

Tip! Unusual edges of the product can be performed using a welding machine, simply melting them. As a result, they will turn into fancy lace.

Of course, such a product is not intended for real flowers, since it will not be possible to pour water into a container, but a composition of dried flowers in such a vase will look very interesting.

From cardboard tube

Manufacturers of linoleum with its packaging inside the roll stack pipe made of thick cardboard, which is an excellent material for the manufacture of a vase. As always, to get the original result, you just have to show a little imagination.

Below we consider one of the options for how to make a vase from a cardboard pipe with your own hands. Before starting work, the following materials should be prepared for this product:

So, the work is done in the following order:

• As in the case of plastic products, to make a vase of pipes from linoleum with your own hands, first of all you need to cut the cardboard blank into three parts.
• Then all three parts must be glued together with PVA glue and pulled off with copper wire.
• Without waiting for the glue to dry, it is necessary to glue masking tape to the joints.
• After a day, when the glue finally hardens, you should remove the copper wire, after which the workpiece must be wrapped with a cloth dipped in PVA. At the same time it is necessary to form folds.
• When the fabric dries, it should be painted with bronze paint. You can use the composition in a can.
• When the paint dries, it is necessary to “walk” all over the relief with acrylic gold paint to give the vase a shine.
• At the end of the work, the vase can be decorated with string or other decorative elements.

On this floor vase from the pipe from the linoleum is ready. Of course, it is not necessary to perform all actions exactly to the point. Based on this idea, you can experiment and come up with your own product design.

Tip! Dried bouquets, decorative branches or other light decorations can be placed in such a vase. Of course, it is not desirable to use it for planting live plants.

Conclusion

It is possible to make a beautiful vase from a variety of "improvised" materials, and, as we found out, it is not at all difficult and long. And if you experiment a bit with its design, the result may even exceed your expectations.

From the video in this article, you can get more information on this topic.