What to do when the pipes are buzzing - the main causes and

Often there is such a phenomenon - the hum and trembling of the sewer pipeline, which causes panic in many people. Someone immediately rushes to call the emergency service, others try to solve the problem on their own, but this is almost impossible, since there are several sources of “terrible” sound. In this article we will try to answer the question that torments everyone - how to solve a problem when the pipes in the bathroom are buzzing.

Causes of hum

Since there are several reasons for the appearance of a hum, then it is necessary to solve them in various ways. If you want to fix the problem yourself, then the information below will be useful to you, you just have to compare the facts and act as instructed.

Poor repair - the most popular reason

• Usually, the sound may appear in the event that a repair or partial replacement of the pipeline has recently been made, for example, the neighbors on the riser did the repair. Such consequences are eliminated only by calling a specialist who will inspect the entire plumbing system. The most common source of hum is a loose pipe connection.

• Also, the buzz of the water in the apartment may be the reason for too close location of the pipes, as the water moving along them still creates a slight vibration.. You can solve the problem without resorting to the services of specialists; it is enough to isolate them from each other, for example, with sound insulating material.

Note! If none of the previously described helped solve the problem, it means the reason lies elsewhere.

Increased sewer pressure

Another reason for the appearance of hum when turning on the water - excessive pressure in the pipeline. It is necessary to fight against this, if only because the result could be a break in the connection, and subsequently depressurization of the entire system.

Note! Determine that the buzz was due to pressure can be a simple way - when you open the faucet with a sharp movement, usually there is a muffled hum.

To solve this problem, do the following:

• To make or purchase a ready-made version of the so-called air chamber, it will help reduce the growing pressure.
• Install on the pipe, which will eliminate the hum and reduce the vibration of the entire system.

The installation is best entrusted to specialists who check the pressure level (the standard is 2 atmospheres) and the quality will connect the silencer to the faucet.

Reason Three - Pipeline Clogged

Another answer to the question of why water pipes are buzzing is accumulated dirt and debris, which enter the sewer system in various ways. A blockage forms a constriction in the pipes, which causes the flow of water to accelerate its movement, resulting in a hum and vibration.

You can solve this problem:

• Removing the faucet (mixer) should be thoroughly cleaned using mild chemicals. Also attention should be paid to the water pipe, since the blockage can accumulate not only at its end, but also for a short distance.

Note! The blockage usually accumulates at the end of the sewer system due to the difference in the diameter of the pipes.

• Cleaning the pipeline with a cable or chemical means for cleaning the sewage system is another option to get rid of the blockage, respectively, and the humming.

• Pneumatic flushing is a more modern and effective solution to eliminate congestion in the sewer system. The price for such a service, of course, will be very different from the handwritten version with a rope, but the result is several times better.

Note! Such methods are effective only on small-diameter pipes; a more labor-intensive process is used to eliminate sewage obstruction (source of hum) in large-diameter pipes. Firstly, the water supply is completely shut off, and secondly, the sewage section is cut off, which is problematic and is cleaned mechanically.

What to do if after such repairs the sound remained, although it became more muffled? A simple and accessible way for every person to eliminate this quiet buzz is to install rubber gaskets between the pipe and the building structure. It is suitable for both plumbing pipes and heating systems.

Problems with water fittings

The source of the hum can be a mixer, to ascertain this, you must:

• Turn off the water in the apartment, so as not to accidentally arrange a flood.
• Remove the mixer and disassemble it. The most common cause is a gasket on the crane box that has worn out (the problem area for all old-style mixers):

• If it moves freely, then it is better to replace it, since a loose pressure will lead not only to the appearance of a hum, but also to leakage.
• When the edges of the strip are pointed, it is necessary to trim them carefully (the product was originally defective).

• Assemble the mixer and put in place.
• Turn on the water and open the faucet, if the problem was in the gasket (there is nothing more to break in the mixer itself), then there shouldn't be a hum.

If none of the above methods helped you to solve the problem with noise, you should immediately contact the specialists who will find the source of the sound.

Conclusion

This problem is usually associated with emergency workers with a common mystery - who buzzes in the pipe in winter? The answer to which is - the wind. Here, of course, the wind cannot make noise, but if this is not understood in a literal sense, then the word means an unknown reason that must be discovered.

In the presented video in this article you will find additional information on this topic.