Bathroom faucet with shower: the selection and installation

The market of sanitary devices offers a large number of different models suitable for specific operating conditions during water treatment. For example, you can purchase a single-lever bath mixer with a shower or an analogue with two valves.

However, on the shelves of shops you can also see a lot of modern products that differ in functionality and other characteristics.

Manufacturing materials

The price of the finished product will largely depend on the raw materials used in the production, so this should be considered first. The most effective materials are expensive, less resistant ones have a low cost.

Before you buy a product, you need to decide on the operating conditions in the room:

• Plastic sink faucet with shower for the bathroom is cheap, but does not fall into the category of durable appliances. Therefore, it is better to purchase for temporary use.
• Products made of alloyed steel has a high resistance to corrosive processes. Other impurities are added to the composition of the iron-carbon alloy to improve quality.
• Devices from silumin are not afraid of rust, but are quite fragile, which means that with constant mechanical effects they can fail. At production the alloy of aluminum and silicon is applied.
• Brass products are considered the highest quality, so they are made from an alloy based on copper. They stand out not only technical characteristics, but also aesthetic properties.

Note! If the number of family members in the house is large, then you can choose anti-vandal faucets for the soul, which are made of brass or alloy steel. They are usually supplied with a touch device.

Control methods

Modern models can be turned on and off in various ways. Which one is the most convenient, everyone chooses.

Again, in the selection process, it is necessary to take into account the conditions in which the instrument will work. Proper purchase can provide a comfortable operation.

Single lever models

The option of installing such products is very popular nowadays, as the adjustment is quite convenient. Maneuvering a small lever, you can provide the level of hot and cold water. In this case, a bath mixer and a shower mixer can be supplied separately.

Products with two valves

This method is considered a classic. It involves adjusting the temperature of the water by opening or closing two special valves. The main mechanisms for supplying the working medium are axle boxes.

First, the required amount of liquid is supplied from one pipeline, and then the opening of the other is carried out.

Touch devices

Plumbing fixtures of this type do not contain any levers and valves, and the water supply is provided with a special sensor. When an object of a certain size approaches the crane, the device is turned on. After its disappearance, an automatic shutdown occurs.

Such products are very effective in terms of water saving. Most often, they are installed in special establishments with high traffic.

For example, in the toilets of cinemas, supermarkets, offices and restaurants. When installing in a residential house, there is a decrease in utility bills.

Analogs with a thermostat

Not so long ago, thermostatic models of the mixer appeared on the domestic market, capable of providing water of the desired temperature without additional regulation. They have a robust design, stylish design and a high level of comfort. In addition, the products are safe to use.

Devices with a thermostat installed are made in the form of a small panel equipped with handles. One of them provides the ability to adjust the temperature of the water, and the other - provides on and off flow. To protect against burns, products are equipped with a special stopper.

Device mounting

Below is information that allows you to install the device with your own hands, and the role does not play, whether it will be a bath mixer without a shower or a combined analogue.

If the installation is carried out with a minimum number of errors, then the durability of the device can not worry.

Tools and materials

• A gas or adjustable wrench is required for tightening the nuts.
• Pliers may be needed to work with some elements.
• Insulating tape protects parts from damage.
• The fluoroplastic sealant is used as a waterproofing.

Work

Before you install, in some cases you have to remove the old device. At this stage, very often there are problems associated with the failure of pipes, because you have to loosen the stuck nut. The use of brake fluid or kerosene avoids such difficulties.

After dismantling, a new product is installed.

In this case, the instruction must be strictly observed.

1. The fittings of the adjusting adapters that are bundled with the main device are wrapped with sealing material in 15 layers directly in a clockwise direction.
2. Next, the parts are inserted into the holes of the pipelines and screwed.. With the help of a key, turning is carried out so that the wide parts are at the same level.
3. On the flanges of the mixer are installed decorative plates, after which the gaskets are laid. The cap nuts are first wrapped with the movement of a hand, and only then twisted with a key.
4. At the final stage, the spout and watering can are installed with a hose. In this case, you have to insert the spacer and gaskets.

Attention! When a shower for a bath with a mixer is installed, cap nuts and other external elements should be wound with 2-3 layers of insulating tape so that their surface is not accidentally damaged.

As a conclusion

The study of the above information will allow you to choose a suitable bathroom faucet, as well as to install it in place without the involvement of specialists, thereby saving financial resources.

To uncover the topic in its entirety, you are invited to familiarize yourself with the video in this article. It will help to get a visual representation of the products of this type and additional technical information.