Choosing a spout for bathroom faucets from the classic and

Today in the market of sanitary appliances, intended for the arrangement of bathrooms, kitchens and bathrooms you can find a wide range of faucets. They differ from each other in design solutions and design, including the spout. The latter serves to drain a controlled stream of water from a tap of a given temperature.

Many are also used to calling this element "gander" or "nose." Consider it below in more detail.

General information

Spouts are made from different materials, they have a different shape, design and length.

The element is an integral part of the mixer for:

• washbasin;
• kitchen sink;
• hygienic shower;
• bathroom;
• bidet.

The choice of their place to install their own hands, as well as the parameters of the spout, are determined depending on the purpose of plumbing fixtures. Let us further consider the detailed characteristics of the device in order to correctly determine when selecting it.

Material

Traditionally used materials that do not corrode:

Coating

Regardless of the design of spouts, they are subjected to careful processing, which is expressed in high-quality grinding and protective coating. This determines both the general appearance of the sanitary equipment, and its resistance to external influences. The coating is applied by several technologies.

Consider them in more detail:

1. Granite is usually used for sanitary fittings in the design of kitchens, but often it can be found in the bathroom. Nice appearance and variety of different colors.

Advantages:

• high strength;
• corrosion resistance;
• good sanitary and hygienic characteristics, prevents the development of pathogenic bacteria.

Minus - the high cost.

1. Chrome is intended for anticorrosive protection. It has an excellent mirror glossy look, it is highly resistant to minor mechanical damage and oxidation. The cost of coating is low, so it is often used in the manufacture of mixers and components for them.

The disadvantage is that after a while the prints of dirty hands, as well as traces of salt from water droplets, will start to remain on the surface.

The variety is matt chrome, the coating is not glossy, but a matte shade. Due to this, the surface is not so noticeable spots, dirt and fingerprints than on the usual mirror.

Tip: with the help of spouts and mixers such external can emphasize the accent of the interior.

1. Stainless in its properties similar to chrome. It also has a glossy, mirror and matte texture, but there are some differences in appearance. The stainless steel is usually used in models of sanitary equipment of premium class, so its cost is quite high.

1. Brass has good strength properties, is resistant to corrosion and has a pleasant appearance with a typical golden hue. But, as on the chromium, it also shows imprints. Brass coating is expensive, often used for products in retro style.

Type and shape of spouts

1. The traditional option is a pipe with a locking nut, as well as one or two sealing gaskets.
2. You can purchase the “gander” separately or in a set with a mixer.
3. The bend angle depends on the model of the crane.
4. The instruction manual permits to install aerators at the end of the pipe, which allow to spray water.
5. Tube section shape:

• round;
• rectangular;
• square;
• oval.

1. Spout can have a form resembling the following letters - G, C, R, S
2. The length of the product is classified as follows:

• shortened - within 200 mm;
• medium - 200-230 mm;
• long - 240-280 mm.

New designs with additional features

In addition to the classic models, manufacturers of plumbing are trying to offer customers new versions of spouts, which have additional functions.

1. Shower set - “gander” for hygienic shower. It is carried out in the form of a watering can, which is connected to the main mixer with a hose. Sometimes models can be supplemented with special holders mounted on the mixer or installed separately.

1. Cascade spout Today is considered the most modern and unusual. It can be installed both for the bathroom and for the sink. Can be wide or flat, it all depends on the model. Thanks to these elements of the mixer, you get a small waterfall in the apartment, giving the interior a special chic.

1. Spring - latest innovative design development. Appearance is different from the traditional classics. Spout is made in the form of a curved spiral resembling a spring, inside of which there is a water supply hose.

Tip: "Gander" can be easily bent in any direction, thanks to such a constructive decision.

Choosing a spout for the bathroom

Ideal in this case is the long version. If the sink is located next to the bathroom, you can direct the flow in it as well. In addition to the faucet with a long spout, you can use new models of sanitary drainage devices for the bath.

For example, water from cascade spouts can flow into its bowl from a horizontal slit or through a wide gutter. In this case, good throughput is ensured and it becomes possible to quickly get a bath.

Install cascade mixers on board. They are beautiful during work and resemble a small waterfall. The cost of equipment is high.

Conclusion

Modern life requires plumbing manufacturers to adapt to its realities. The recently introduced innovative models of mixers have new additional features that improve the comfort and convenience of their use.

In addition, water savings today also plays an important role in product development. The video in this article will provide an opportunity to find additional information on the above topic.