Drinking water mixer with two spouts
The kitchen is designed for cooking, so the plumbing system must be supplied to it so that it is possible to wash dishes and food, as well as prepare various dishes. At the same time, efficiency stands first. In this regard, the combined faucets for running and drinking water deserve special attention.
Description of the main advantages
Products with two spouts allow to solve kitchen problems in the conditions of the modern world most rationally. For technical needs and washing dishes, the liquid is taken from one tap, and for cooking and drinking - from the other. In this case, the wear of the filtering devices is not as active.
The advantages of the method are listed below:
- The increase in the service life of cleaning devices installed directly in front of the mixer is very significant.
- Affordable price of products has a positive effect on the overall increase in consumers, which leads to the expansion of the range.
- Stylish design of products provides an opportunity to fit them organically into any modern interior.
- Although installing devices is somewhat more complicated than in the case of conventional counterparts, it can be done by hand.
- The reliability of the design is quite high, which means that we can talk about the long-term operation of the plumbing device.
Addition! Kitchen faucets with tap for drinking water are easy to manage. The opening of the main channel is carried out by the usual methods, and the supply of purified liquid is made using a small lever.
Product types
Models can differ not only in appearance, but also in many other characteristics. Of particular importance is the material used in the production and management method. If the selection does not take into account these parameters, you can purchase a product that is not suitable for certain operating conditions.
Manufacturing material
As well as other types of sanitary devices of this type, the combined mixers for running and drinking water can be made using different materials. Therefore, their cost may vary significantly, because the lifetime of the devices will vary greatly.
The most common products are stainless steel. Such models are resistant to corrosion, and therefore can serve for a long time in aggressive conditions. Models are mainly focused on rooms decorated in modern style.
Brass is very popular in the production of these products. The material is a double or multicomponent compound based on copper, where zinc is used as an alloying element. Sometimes tin, manganese, nickel or lead is added to the composition.
Ceramic mixers with connection of filter for drinking water look elegant enough. Products made of baked clay tolerate sudden changes in temperature, and also have good resistance to the effects of detergents and hard water.
Plumbing devices with two spouts can be made using other materials. However, they belong to the category of expensive goods, as they are usually made of valuable metals.
Control methods
- Valve models assume the implementation of the supply of working medium from the main channel using axle box mechanisms that are connected to specific pipelines.
- Lever kitchen faucets with a tap for drinking water are easy to use. To open the water, it is enough to raise the lever, then turn it in the right direction to adjust the temperature.
Installation work
After the choice is made, you can immediately install the mixer with a tap for drinking water. When carrying out work, it is recommended to adhere to a specific sequence of actions, because a phased installation allows for a high-quality installation.
Toolkit
- The adjustable wrench is a basic fixture for tightening the nuts.
- Screwdriver allows you to work with small parts.
- Flashlight may be required for highlighting in the workplace.
Detailed familiarization with the process
- Preparatory actions are being carried out, which are reduced to shutting off the pipelines and dismantling the old product, if there is one.. When removing it, the water supply hoses and fastening bolts are unscrewed.
- Further, two flexible wire elements intended for cold and hot water are screwed to the corresponding pipes.. In the place where the flow of cold water, set the tee for pipes.
- After this, the mixer itself is attached.. Three hoses are immediately bolted to it: one is connected to hot water, the other to cold, and the third conductive element is taken from the filter to the drinking tap.
- At the last stage, valves open, thereby restoring the flow of the working environment.
Note! Before you install a new mixer with a filter for drinking water, you must carefully clean the seat. The connection with the main pipelines is best done through flexible hoses.
Final part
The created instruction should help the beginning master to understand what are kitchen faucets, equipped with a tap for purified water, and how they are installed directly into place.
The main difference from the traditional method of connection is the presence of an additional hose, necessary for the supply of purified liquid. Familiarization with the video in this article will clarify the difficult moments.