How to change the mixer in the kitchen - especially

08-04-2018

Mixers

During operation, the equipment is subject to wear and over time may simply fail. In this case, urgent repairs are necessary, since it is difficult to imagine a comfortable stay without running water. The question of how to change the mixer in the kitchen with your own hands is difficult for many people, but in fact the work is quite simple, and, with care, you can do everything in the best way.

The main thing is to follow the recommendations in this article.

In the photo: with your own hands you can replace a faulty assembly in an hour

Preparatory stage

First of all, you should prepare everything you need so that during the replacement process you will not be distracted by the search for the right tool and accessories:

New mixer	Without it, it does not make sense to begin work, so make sure to purchase this product beforehand. It is better to look not the most budgetary options, since their reliability raises big questions, the price of quality products can not be very low, as they are made of quality materials
Tool kit	This includes just a few fixtures: a cross-head and a flathead screwdriver, an adjustable plumbing key (in the extreme case, suitable-sized spanners) and pliers. It is important, before changing the faucet in the kitchen, to check whether the tool is suitable for size, so as not to look for the right tools afterwards.
Flexible eyeliner	Deciding whether to replace these items should be made after inspection. If the clamping nuts have corrosion, and the braid looks worn, then it is better to buy new hoses of the appropriate length, this guarantees the reliability of the communications and their durability
Rags and cleaners	They will be needed to clean the surface of the sink after removing the old mixer, because there, as a rule, dirt accumulates and a raid forms. Cleaning the surface provides a more tight fit of the sealing rings and eliminates the ingress of water and dirt under the mixer

Tip! It is best to combine the replacement of the tap with flushing the siphon, especially if the sink can be removed. The fact is that mounting and dismounting is much more convenient on the removed sink, and this automatically involves disconnecting the siphon.

If possible, before changing the faucet in the kitchen, it is better to remove the sink

How to organize a workflow

The whole replacement procedure is divided into two main stages - the dismantling of the old device and the installation of a new one, we will consider each of them in detail. As noted above, the work is very simple and can be done by any person, but if you ask how much it costs to change the faucet in the kitchen, then you will most likely be told an impressive figure, so it makes sense to solve the problem yourself.

Removing the old crane

Replacing the mixer in the kitchen with their own hands is made according to the following algorithm:

The first step is to turn off the taps at the water inlet to the house or apartment. Most often they are located in the toilet or in the boiler room.

Note! Keep in mind that for the period of the work water will not be everywhere, so choose a time when its absence does not cause inconvenience among the household.

Valves blocking communications are most often located in front of water metering devices.

The next operation is to open the taps on the mixer in order to drain the remaining liquid from the system. Do not forget about it, since you risk unscrewing the flexible liner to fill the kitchen, because there is a lot of water in the pipes.
If the sink is invoice, then it should be disconnected from the countertop. If the construction is monolithic, you will have to adapt to the existing conditions in order to work comfortably, empty the compartment under the sink as much as possible and first of all disconnect the siphon, as it will greatly interfere when removing and installing the faucet.

Next, examine the attachment points of the flexible connection to the water supply system; if you have already checked the hoses before replacing the faucet in the kitchen, you can immediately proceed to disconnecting them. The easiest way to do this is with the help of a plumbing key, but an appropriately sized horn will do as well.

If the sink is removable, the eyeliner is first disconnected from the supply lines, if built-in - you can only disconnect them from the mixer

The removable structure should be carefully removed and placed in such a way as to ensure unhindered access to the bottom of the car wash; further work will be done there.
The elements are detached as follows: if you need to unscrew the flexible liner, then this operation is carried out first, if this is not required, then the fastening pins or the stop nut are loosened. If the design includes a threaded pin, it is unscrewed with a cross-head or flathead screwdriver.

After unscrewing the studs, you can easily remove the clamp and remove the mixer

Note! If you use the same hoses for liner as you were in the system, you should carefully inspect the rubber seals. If they show signs of wear or elasticity leaves much to be desired, it is better to buy rings and replace them, so you will ensure the reliability of the connections.

Installing a new design

After removing the old system, it is worth clearing the attachment points, after which you can proceed to installation work:

First of all, flexible hoses are screwed, it is best to do it first, since it is not very convenient on the fixed knot. The eyeliner is tightened with moderate force, so as not to crush the gasket and not to damage the threaded connections.
Next, a rubber ring is installed, which will prevent water and dirt from entering the base of the tap.. It must be located in the groove made specifically for the seal, otherwise the structure will not stand evenly and it will be difficult to clamp it.
After that, the bottom mount is installed, it can be on one or two studs, plus a rubber gasket and pressure plate are included in the kit. At first the hairpin twists, after which the sealing element is placed, then the metal clamping element. The structure is clamped with the help of a nut, it is important to tighten the system so that the structure is fixed.

These elements consist of a clamping unit in most designs.

After that, the supply pipe is attached to the water pipes, this can be considered to be the work on assembling the system. After assembly, it is very important to make a test connection: let the water into the system and open the taps. During this operation, you should carefully check all the connections for leaks, and if necessary, re-connect them.

For repair, the removal of the construction is not required, and if you are interested in how to change the cartridge in the kitchen faucet, read the corresponding review on our portal.

Considering the question of how much it costs to replace the mixer in the kitchen, it is important to note the following:

Workers ZhEKA should carry out such work for free, but sometimes they have to wait for several days.
The average cost of work varies from 500 to 1500 rubles, that is, it is often a situation where the price of a mixer is much cheaper than installation services.
When ordering services, pay attention to what is included in the price, some unscrupulous experts indicate a low price for installation, and then it turns out that dismantling costs almost as much.

Conclusion

We considered how to change the faucet in the kitchen on our own and to do it efficiently and reliably. The video in this article will vividly show some important points of the workflow and allow you to understand the topic even better.