How to install the faucet in the bathroom - recommendations
When carrying out repairs indoors or when relocating to a newly built housing, installation work is required for all elements of the system. Consideration of how to install the faucet in the bathroom in the wall is required to pay close attention, since this operation is significantly different from the work of connecting faucets in sinks and kitchen sinks.
It is necessary to follow all the recommendations for installation, as any errors and miscalculations are fraught with large-scale alterations.
Mixer selection criteria
Selecting a specific model of equipment should be in advance in order to lay communications in accordance with its parameters. When considering these or other options, it is important to consider the following parameters:
| Installation method | The first criterion that should be repelled is the option of mounting the system, there are two varieties: wall structures attached to the conclusions of water pipes on the wall and options mounted on the side of the bath. The first type is much more common, therefore, using its example, the working process will be considered. |
| Design features | It is also important to take into account such factors as the length of the spout pipe (especially if the system will be used for baths and sinks at the same time) and the presence of a shower unit (in this case, the configuration of the sprayer, hose length, and unit layout features are important). |
| Control method | If earlier there was only one option - valve systems, then in our time, lever mechanisms are becoming more and more popular. The newest solution is thermostatic units in which temperature and pressure are automatically adjusted according to pre-entered settings. |
| Manufacturing material | Most often there are two options: a silumin alloy and brass. The main advantage of the first is the low price, but its strength and durability leave much to be desired. Products made of brass are much safer and more durable, even though their cost is even higher, this option is most preferable, as you are guaranteed to get a quality mixer |
Note! It is very easy to determine the material used to make a crane - the weight of silumin variants is much lower than that of brass. In addition, brass is clearly visible from the inside of the product.
Features of the work
The list of activities depends on many factors, and proper preparation is as important as qualified installation. We divide the whole process into two stages - preparation and installation.
What tools and materials will be needed
To work without stopping and downtime, you must pre-stock with all necessary:
- Plumbing key - a universal tool that replaces the whole set. No wonder he is in the arsenal of every professional plumber. Pipe No. 1 pipe wrench is best suited for working with mixers (they have a gradation depending on the size).
- You will also need a cross-head and flathead screwdrivers, they are used to assemble the structure, they will also help remove the remnants of the seal from the thread (most often it is flax).
- It is best to use all the same flax for the processing of the joints, or the special sealing compound Unipak - it can be used to guarantee the excellent reliability of all the joints and their resistance to temperature changes. If you decide to study the question of how to install the faucet in the bathroom, then do not forget about the sealing compounds.
Preparatory activities
First, consider what should be done if the mixer is being replaced:
- First of all, the inlet line of hot and cold water supply is blocked. Cranes are usually located in front of the counters, if available.
- Then the water supply opens, and the remaining liquid is drained from the system, do not forget about it, otherwise, when unscrewing, you will splash all the walls and other nearby surfaces.
- After that, the clamping fixing nuts are loosened, further unscrewing is done manually, this is done easily and quickly. The main thing is to tear down the fasteners at the very beginning, sometimes during the years of service it becomes attached and it is necessary to use different compositions for processing the joint, and sometimes even to heat them.
Note! Tearing off the nuts should be done carefully so that the edges do not lick, otherwise the work will be much more difficult and you will have to use special tools or even cut the knot, which is quite difficult and tedious.
- If the conclusions are eccentrics outdated design or their state leaves much to be desired, they should also be dismantled. This is done with a spanner - the middle part of the structure is clamped to it, you should not use too much force, as the element can break off and you have to spend a lot of time to extract it.
Tip: remove the broken eccentric need a hacksaw blade for metal, a hammer and a screwdriver. The cloth makes several cuts along the circumference of 2/3 of the eccentric wall thickness, after which a screwdriver is placed between the pipe and the eccentric and with a hammer a piece is carefully knocked out
If the installation is carried out in a new room, then it is important to foresee the height at which the faucet is installed from the bath;
- The height of the upper edge of the bath is taken as a basis, and it is important to foresee how the floor will rise, because after laying the sewage system and laying ceramic tiles, the floor level can rise to a height of 10 cm.
- Another important factor is the presence of a sink, if the mixer is to be used on it, it is worth remembering that the height of the bowl is in the region of 82-85 cm, plus the gander should be located approximately 30 cm higher.
Also, when summarizing communications, several important recommendations should be kept in mind:
- The standard distance between the leads is 150 mm, but it is better to additionally check what your mixer has, so that the system does not have to be redone later.
- The joints should be located flush with the finishing layer of finish, that is, if facing tiles are to be laid, the distance must be correctly calculated (it is better to consult with a tiler specialist, he will tell you the exact finish layer).
- Both exits should be on the same horizontal line, their correct position is best checked using a normal building level.
Mounting construction
Consideration of how to install the faucet in the bathroom should be started with instructions for assembling the product, it should be included in the package, so you should not focus on this fact.
Further work is done as follows:
- First of all, the eccentrics are screwed onto the joints, the thread is pretreated with Unipack or wrapped with flax, after which the knots are wrapped so that they are located at the same level and the distance between them is 150 mm. The correct location is best controlled by level.
- Next, a mixer is tried on, if the nuts go through the thread easily, then everything is fine. The design is removed, the thread is processed with a sealant, after which the connection is gently tightened with a plumbing key. To avoid damage to the surface, a cloth can be laid between the clamping jaws and the nut.
When working with their own hands, often the connections are clamped too tightly, which leads to damage to the gaskets - they simply crush and very soon become unusable.
If you have thermostatic equipment, then all the features of its work and settings will be prompted by instructions for installing and configuring the system, it is quite simple and will not cause difficulties even in the absence of experience.
Conclusion
It is possible to put the bathroom faucet without help, you will save a lot of money and be sure that everything is done as it should. The video in this article will help to understand some of the work points even better.