Mixer connection: installation features

16-02-2018

Mixers

Currently, there are a huge number of different types of faucets that can be installed both on the kitchen sink and in the sink in the bathroom. At the same time, they are distinguished by their structural features and have a strictly defined method of installation. That is why the question of how to connect the mixer in the kitchen or in the bathroom often interests not only beginners, but also professionals.

Amateur photo, the process of connecting such devices with fixation on the wall

Phased process

First we need to say that based on a wide variety of such structures, to describe each model does not make sense. Therefore, explaining how to connect the mixer in the kitchen should be on a certain type of products, making some explanations related to the features of other systems. However, it must be remembered that there are also such models that have a unique design and their own installation method.

To understand the principle of installation of a particular model, it is necessary to study all the documentation attached to it, and especially the drawing.

Preparatory process

If the connection will be made to polypropylene pipes, then at the stage of their installation it is necessary to take into account the length of the hoses that come with the product to avoid the formation of loops or bends. When using old metal water pipes, it is worth checking the distance from the end of the system to the intended fixing point of the device. If the supplied hoses do not match, then they must be replaced.

Measurement of the length of the hose can be made using a conventional tape measure or ruler

Also immediately it is necessary to install an angle tap for connecting the mixer, which will help to significantly simplify both the installation itself and the subsequent operation. The choice of such a product depends only on the personal preferences of the user or some of the technical features of the system.

It is better to check the complete set of delivery of all parts necessary for installation in a particular model even in the store

Usually a hose for connecting the mixer is attached to it before being installed on the sink.. This will allow to firmly fasten these elements in a comfortable position, which is quite difficult to do after fixation.

Some bore holes have a small diameter, which means that the hose must be attached to the faucet after installation or after passing it through the sink

It must be said that the delivery of such products almost always includes installation instructions, which are designed specifically for this model.. Therefore, before proceeding to work, you need to study it in detail.

Tip! Some models of mixers are best to install on the not yet fixed sink. This greatly simplifies installation, although you can do without such an action.

Corner taps can be quite convenient for a specific installation of the product, especially if the pipes go out of the wall quite a bit.

Fixation and connection

First of all, it is worth noting that when answering the question of how to connect the hose to the mixer, the master recommends that after performing this procedure, you should make sure that the fixing mechanism functions correctly and does not touch them.

The fact is that the design of such a product is usually made in the form of a plate that holds the tap on the back side of the sink with a screw. Therefore, it is very important that when using it, other elements would not be damaged.

When starting to work, you need to stock up with all the necessary tools and especially keys of the appropriate size.

It is worth noting that in the bathroom use a few other devices for fastening. This is due to the fact that the sink there has thicker walls and fixtures are arranged differently. They usually have the form of a massive nut, which is threaded onto a threaded rack.

It is important to remember that when placing the tap on the sink, you must use special gaskets that are included in the package. In this manual, explaining how to connect the faucet in the bathroom, it is strongly recommended to thoroughly wipe the seats, so that they do not have dirt and even moisture.

Do not forget about the rubber gaskets, because they not only securely fix the design, but also serve to seal the joints

The crane is connected to the system using hoses. They usually have rubber pads, which means they should not be clamped too tightly.

Tip! Before checking the operation of the product, it is necessary to make sure that all the connections are tight and that the adjustment valves are firmly fixed.

The appearance of the simplest mechanism for fixing the product on the sink

Recommendations of specialists

If the work is done by hand, then you need to be more careful. The fact is that during the installation process you can easily damage the sink, especially if it is ceramic.

The fixed product must not turn or play, which means that it must be clamped very firmly.

Usually mixers are sold in assembled condition. Therefore, when purchasing such products, it is necessary to ensure their integrity and the availability of all components. It is also worth checking that the guide included in the kit corresponds to the selected model.
There are systems of price, which is quite high, since they can be equipped with additional elements and require connection to the electrical network. The approach to the installation of these structures should be based on a special instruction specifically for this model. This must be taken into account at the acquisition stage and in advance to ask the seller about this process.

Professional craftsmen try to make their task as easy as possible, so as not to work in an uncomfortable position and have open access to the installation site.

Conclusion

After reading the video in this article, you can get more detailed information on how to install such elements. At the same time, on the basis of the article given above, it is necessary to conclude that such work should be done very carefully, trying to ease the work from a comfortable position as much as possible.