Mixer device - an overview of the main modifications and
Mixing knots are used for a long time, and it is possible to assert with confidence that without them it is difficult to imagine a comfortable life in our days. Naturally, problems may arise with equipment during operation; therefore, it is important to know the main features of the device of this group of products. For example, having studied the device of the mixer for the sink, you can easily understand the knots in the bathroom, since the principle of their work is similar, there are only minor design differences.
Types of designs
Naturally, the device of the product may vary depending on the principle of its work, here we can distinguish the following main options:
| Valve systems | The most common option, which a couple of decades ago was the only possible one. The advantages include such factors as the low price and ease of repairing your own hands. Of the minuses, we will highlight the inconvenience of setting the desired temperature and low reliability (compared to other varieties) |
| Lever systems | This option is the most popular today due to the fairly affordable cost and ease of use. Using such a system is very convenient, since all the necessary settings are made with a single lever, which provides the required pressure and temperature. |
| Thermostatic design | Fundamentally new version, whose work is fundamentally different from the two above. Temperature and pressure are set in advance. A special valve regulates all indicators in the process. It is very convenient, but the cost of these models is still very high. |
Tip! Never save on the quality of products, especially when it comes to complex thermostatic systems, it is better to choose a more expensive option, it guarantees its durability and reliability.
Other features
In addition to the fact that the locking mechanism differs, the functional features differ depending on the purpose of the mechanism. Consider the most important design differences.
Kitchen
The device of mixers for kitchen has the following features:
- Most often, the body is installed on the sink, although you can find wall options. It all depends on how communications are summed up.
- Pipe spout should provide ease of use: washing dishes, washing vegetables, etc. Therefore, it is very important to choose a model that will satisfy your needs.
Tip! The height of the spout should be such that between it and the bottom of the shell was from 30 to 40 cm, that is, the deeper the sink, the lower the gander is located.
- Spout should be swiveling to ensure ease of use., This is especially important for sinks with several sections, in order to use them all, it is necessary that the spout move.
- Considering the device of the kitchen faucet, it is impossible not to touch upon such an option as a modification with a pull-out spout.. With their help, it is very convenient to carry out a variety of operations, especially if the sink is large or has several sections. Such options are very well suited for those who appreciate convenience and comfort.
Bathroom
There may be a number of options, but as a rule, a mixer with a shower is most often used, its features are as follows:
- In addition to adjusting devices and spout in the design of the mixer there is a shower unit attached through a flexible hose.
- The knot is installed either directly on the mixer housing or on a special holder on the wall. There are no special differences in functionality, you should choose based on what is more convenient for you.
- Switching the flow direction from the tap to the watering can is done by means of a special lever. The flexible hose is fastened with a cap nut, that is, if necessary it can be easily replaced.
- If you have a futuristic-looking thermostatic faucet, then the installation and assembly instructions are mandatory for studying, since its device can be very different from the generally accepted standards.
Other options
In addition to the above solutions, you can find other types of mixers, we will study some of them:
- If you have a shower, the bath mixer is unlikely to fit. A special design is needed, which is two units, one of which mixes water to the desired temperature, and the second supplies it to one or another mode.
- For small sinks designed for hand washing, small taps with a short gander are used that do not rotate, as this does not make sense. This option is distinguished by simplicity, so its cost is low.
- If you have a bathroom combined with a bathroom, then an excellent option would be a faucet with a hygienic shower. This option can be combined with the system on the sink, and can be mounted separately either on the wall or on a special bracket attached to the toilet seat.
Whichever option you use, it is important to periodically inspect the structure for leaks, damage and reliability of all connections. Problems are much easier to solve when they are not very big.
Conclusion
A variety of modifications provides the ability to select the best option for any type of communication. The video in this article will tell some important aspects of the topic under consideration and help to understand it even better.