Necessary spare parts for mixers at their repair

11-09-2018
Mixers

Any complex detail consists of several elements. The same applies to the faucet or faucet for bathroom and kitchen. From time to time the devices fail, so you need to be ready to replace some of them. Usually we do not store spare parts for mixers at home, but purchase them after an accident. Consider today a device for a bathroom faucet, to know what components will be needed during the repair.

In the photo - what are the necessary parts for the faucet in the bathroom

be ready

Every day we visit the bathroom. We take a shower and a bathroom in the morning or in the evening, or even twice a day. Therefore, soon we will have to face the problem associated with the replacement of the mixer or its internal parts.

If you do not want to call the plumber and like to do almost everything around the house with your own hands, you just need to know the device of this plumbing fixture. So you can save both time and money by buying exactly what you need, and not everything.

Most often in the bathroom is a mixer of the combined type - a faucet with a shower head, which reduces the space, but increases the possibility of breakage.

Accessories for lever type mixers

At the first stage, it is necessary to determine what type of crane is used, what kind of repair is necessary for it, and whether it is worth doing it at all. Can it just replace the entire structure?

Types of faucets with shower for the bathroom

There are three main design options:

  • valve;
  • ball or plate (lever);
  • sensory.
Spare parts and accessories for mixers of various types

The price of the latter today is the highest among all presented above. They relate such models to contactless devices that work through the use of motion sensors. To know how to repair it, you need to understand its design.

The product includes such spare parts that are standard for such sanitary equipment:

  • filter;
  • valve or lever to adjust the water temperature;
  • spout or "gander";
  • the electronic unit;
  • valve;
  • flexible eyeliner;
  • battery.

Tip: You can also purchase devices equipped with remote controls.

Using the remote control, you can make the necessary settings in the product. But, such devices are quite expensive, so not every company that sells even luxury plumbing, can offer similar mixers. Before repairing and purchasing parts for this device, it is best to consult a specialist.

More simple in design valve and lever mixers. The cost of spare parts for them is small, so we will deal with them in more detail.

Spare parts for bathroom faucets that you most often need

Valve mixers

These models are familiar to most of the users:

Design
  1. Two movable valves and housing. Mixing hot and cold flow occurs by opening and closing the valves.
  2. The main part of the case is a crane that adjusts the pressure and water supply. It can be with a rubber cuff or with a ceramic disc. Usually these designs are interchangeable and fit into each other's nest.
Connection There are two types of devices:
  1. With connections the connection is due to the flexible or rigid liner.
  2. With a tee ("herringbone") - in this case, the instruction recommends connecting the two channels of the housing to the pipe wiring with a tee.

Tip: when buying a new bathroom faucet, check how the moving parts rotate. Otherwise, the tap may not completely block the flow of water, or the “sheep” will senselessly rotate in different directions. Because of this, it will not be possible to take full advantage of the shower, and there will also be a problem with a set of water in the bath bowl.

What are the accessories for bathroom faucets

Lever mixer

The model every year is gaining popularity among consumers. It is easy to use and has an attractive design. The temperature is adjusted by moving the knob to the right and left, the pressure is up and down.

Components:

  • housing;
  • lever, rotary handle;
  • case cover;
  • gaskets;
  • locking element;
  • replaceable cartridge mechanical cleaning;
  • circular nut;
  • ball or ceramic cartridge depending on the type of device.
Spare parts for Grohe mixer

Difference of spherical option from ceramic:

  1. In the ball cartridge inside the body there is a hollow ball with holes, which is connected to the handle. Through the holes in his cell comes cold and hot water, which is mixed there and into the spout of the device. The temperature and pressure of the fluid are controlled by turning the ball.
  2. In a ceramic cartridge, the work happens like this - two ceramic plates are tightly pressed to each other and move only when the lever is turned. They have holes that are combined and then the water flows, mixes and enters the "gander" mixer.

Tip: to disassemble such cartridges is meaningless, they need to be replaced entirely in case of failure.

Conclusion

Today we looked at the main types of cranes - valve, lever and non-contact. Understood - what they consist of and what spare parts for mixers are necessary for their repair. You can come to the conclusion that most often you need to change the rubber cuffs that are in the valve design.

If the ceramic cartridge of the mixer fails, you just need to replace it with a new one. In addition to internal parts, they lose their original reliability and shower hoses, they are also better not to repair, but simply to replace. The video in this article will provide an opportunity to find additional information on the above topic.

Categories