Sink mixer: types and features

21-09-2018

Mixers

Most craftsmen recommend purchasing sinks with faucets. This is due to the fact that some models are compatible only with certain types of these products. For example, the hole in the stainless steel sink under the faucet is checked directly on the market, although in most cases they are standardized.

Amateur photo of a kitchen faucet with a mounted sprayer and the ability to bend at an angle

Species

To begin with, it must be said that there are so many different types of such devices for sink mixers, which differ not only in the principle of installation, but also in some design features. In this case, sinks and kitchen faucets should be purchased from one manufacturer or make sure they are compatible.

The fact is that there are such modern models that, by virtue of their design, require installation on strictly defined systems that maximize their operation.

Variant of the simplest product made of bronze with a special protective coating against oxidation

Manufacturing material

Immediately it should be said that the mixer for kitchen sink should not be subjected to corrosion and at the same time have a good appearance. That is why the construction of ferrous metal should not be used.

Ceramic products have a rather original appearance and fit into almost any interior.

Professionals claim that a tabletop brass mixer with electroplating for washing is considered the most ideal option for such purposes.. It combines excellent quality and performance with a relatively low cost.

Modern stainless steel construction with installed electronics, responsible for the supply of water and its temperature

It is also necessary to note the products of brass and bronze.. Their price may seem too high, but the appearance and vintage performance fully justify such costs.

Some materials themselves have a good appearance and do not oxidize upon contact with water.

Recently, ceramic products have become very popular.. They are quite practical and have a good design. However, the instruction manual does not recommend exposing them to mechanical impact in order not to damage it.

Tip! The choice of a particular type of material is directly dependent on the personal preferences of the customer. However, it must be remembered that the better the product is made, the more expensive it is.

Design with a peculiar shower, which greatly facilitates the operation

Structural features of the seat

Typically, the diameter of the hole in the sink under the mixer is standard and does not always have a round shape. However, most manufacturers are trying to make it minimal, so that with a little refinement it fits any crane model.

Some systems should be purchased complete with a sink, since it is in it that a unique fixation technology can be implemented, and so the design will have a finished look.

Given this, it may be necessary to make a hole in the sink under the mixer to ensure its proper fixation. However, some types of cranes may require several passages. They can be easily made independently, but only in stainless steel products.

It should be noted that the manuals describing how to cut a hole in the sink under the mixer, do not advise making it yourself in ceramic structures. It is best to buy a sink with several seats, which, if necessary, can be closed with a special stopper.

When purchasing a specific model, you should immediately read the manual for its installation and operation, which also describes all the technical characteristics of the device

Considering such features, before determining how to fix the mixer at the sink, you need to study the design of its fixation mechanism and become familiar with the options for using it. It is very important to find out the area of free movement of the clamp and whether the gap formed after it is completely closed corresponds to the thickness of the shell wall.

Tip! Some manufacturers create additional systems that also require fixation at the sink. To do this, usually use either a special fastener or a specific model of the sink.

Mixer version, which, if necessary, can be bent at the right angle and locked in this position

Internal device and add-ons

First of all, it should be said that all mixers differ in the design of the locking element. This can be a bush, ball or a kind of needle. In this case, you cannot determine the type with your own hands when buying, because the mechanism is inside, although its designation must be indicated on the packaging and in the instructions.

The original model of the mixer will be, the more complex and non-standard elements it has, which require the use of a special installation method or the presence of an appropriate sink.

Separate attention deserve the design with additional elements. For example, faucets with a shower are very popular even in kitchen sinks. They allow rinsing in hard-to-reach places and greatly simplify washing dishes.
You should also purchase products with special nozzles. They spray a stream of water, allowing you to use it more efficiently, and at the same time contribute to savings.

Tip! Sometimes it is worth buying a multifunctional product with a mass of various add-ons, since this will help to significantly simplify operation and facilitate labor. However, the cost of such products is quite high.

It is necessary to install such products very carefully, using appropriate tools, because using tools of antiquity or negligent work can damage the coating or violate the installation principle.

Conclusion

After reading the video in this article, you can get more detailed information about these products and their design features. At the same time, relying on the article cited above, it is necessary to conclude that at present there is simply a huge variety of such systems, which allows you to choose the most suitable for your tasks.