What is a hot water mixer and how it is used

In this article, we will talk about what constitutes a modern heated mixer, what are the features of its design. In addition, we consider the main advantages and performance of such equipment.

The topic of the article is more than relevant, as a person has always strived for maximum comfort in all aspects of life. And it is precisely the warm water in the kitchen faucet that is one of the most important conditions under which life comfort is possible.

Despite the fact that faucets for water heaters have been used for a long time, traditional autonomous water supply systems cannot guarantee the comfort of operation, since the water supply does not take place immediately, but with some delay. This delay is due to the fact that the water needs a certain time in order to make the way from the common heater to the sink.

However, this problem has been solved, since today there are compact, cost-effective devices in operation that are capable of maintaining the set temperature parameters. A modern water heating mixer is capable of providing the required temperature almost without delay.

Construction features

A water faucet is a small-sized plumbing equipment that allows you to maintain a set temperature value for a long time. This device is programmed with your own hands, as a result of which you can set the necessary temperature parameters and pressure intensity.

At the moment, two modifications of devices with a thermostat are on sale:

• Modifications equipped with a touch-screen or push-button LCD screen can function while connected to the grid or powered by batteries.. The most technologically advanced models support the ability to control via remote control.
• Mechanical Modifications - handwheels, levers, screws for a screwdriver, etc. are used to control temperature parameters.

Important: Both those and other modifications are made separately for the kitchen sink, for the washbasin in the bathroom, etc. However, some manufacturers make universal appliances that can be used both in the kitchen and in the bathroom.

Features of operation

The device with heating is distinguished by an uncomplicated design. The device is based on a special mixing valve. The valve is regulated by means of a cartridge with a sensor that is sensitive to even insignificant temperature differences.

The design of the cartridge consists of several thin bimetallic plates and acts as follows:

• With changes in water temperature, the cartridge is deformed, expands with increasing temperature and narrows with decreasing.
• The temperature parameters are adjusted by limiting the deformation of the plates to the limit equivalent to one or another temperature value.
• When the water in the system is heated to a temperature above the set limit, the blocking mode is activated. As a result, the heating stops and the hot water stream is diluted with cold water. Thus, the device eliminates the possibility of accidental burns.

Advantages and disadvantages

Choosing a mixer for giving heated water, you must consider both the advantages and disadvantages inherent in these devices.

Consider these qualities:

• The economical consumption of hot water is a significant advantage, considering that the cost of energy is high. For example, during the operation of a conventional storage tank, the entire volume of water is heated, and only a small part of it is consumed. The remaining water gradually cools down, as a result of which it is necessary to reheat the contents of the boiler. By operating the mixer, equipped with a flow heater, you bring to the required temperature just as much water as you use and no more.
• Safety of operation due to the impossibility of overheating of water. That is, you can initially set the necessary parameters of temperature and intensity of pressure, and they will be maintained until you decide to change them.
• Operational comfort, as the heater is simple and easy to use.

Are there any drawbacks to keep in mind when deciding to purchase such equipment?

Unfortunately, there is one drawback - the high price of the device. On the other hand, can cost be considered a disadvantage, considering the possibility of saving electricity when heating water and considering the comfort of using such heaters?

Installation Features

Despite the fact that the instructions for installing water-heating equipment is not difficult, there are a number of recommendations that should be considered when starting installation work.

• A mixer with the possibility of heating water is, as a rule, not universal equipment. Therefore, appliances for decorating the kitchen sink should not be used in the arrangement of the bathroom or shower. Non-compliance with operational requirements will adversely affect the functionality of the device.
• When installing a sanitary device with power from the outlet, you need to make sure that the power source is grounded. Non-compliance with this rule may adversely affect the safety of use of the device.
• It is mandatory to take into account the location of the hoses of the flexible connection hose. In accordance with the instructions, hot water is supplied from the right side, while cold water is connected from the left side. If you confuse the location of the hoses thermostat sensor will work incorrect.
• Given the presence of an expensive heating element, when you install the mixer you need to take care of filtering incoming water. For this, a filter is installed in front of the mixer in the system.

Important: The presence of a coarse filter will not only improve the quality of tap water, but also significantly extend the life of the mixer.

Conclusion

Now that you know what a water faucet with a heater is, you can choose the modification of these devices that will best suit your needs.

Do you have any questions that need any explanation? In this case, you will find more useful information by watching the video in this article.