Installation of a septic tank bioxy
Septic? This device performs the processing and cleaning of sewage in autonomous sewers. Its installation is carried out in private houses, where there is no urban sewage. The function of the septic tank "Bioxy" consists in accumulating its sewage tank with subsequent processing. Bacteria colonized in organic waste multiply and process waste water in the course of their life. The water purified by bacteria and the remains of silt are used in a personal farm as fertilizer.

So, you decided to install on the site a septic tank “Bioxy”, but you have no idea how to start the work. In this article we will look at how to make installation of a septic tank "Bioxy" on our site.
Model selection

Before you install a septic tank, you must select a model. There are several models of the septic tank "Bioxy", which differ in their modification. At first glance, it looks like a big fridge. Having different characteristics, the equipment is installed at different depths and depends on the depth of the laid sewer pipes.
- If the sewer pipes are located at a depth of no more than 90 cm, then it is enough to purchase the usual "Bioxy".
- With a depth of 90 to 140 cm, it is necessary to install a septic “Bioxy Long”.
- Well, if it turns out that the location of sewer pipes is deeper than 140 cm, install the Bio-Bio Super Long model.
- Another one of the main parameters that you need to pay attention to before buying a septic tank "Bioxy"? This is the volume of recycled sewage.
- If up to 3 people live in a dwelling, it is enough to install the option “Bioxy - 0.6”.
- When the number of people living in the house of 5 or more people, you must install "Bioxy - 1".
There are models that can purify wastewater from sewers from a hundred people. This type of septic tank is installed in the cottage villages.
Location selection

So, you have chosen a suitable model of septic tank. The next step is to select and prepare a place for the installation.
- "Bioxy" should be installed in such a place that it is possible to lay sewers to it without obstacles.
- The distance from the septic tank to a residential building, according to sanitary standards, should not be less than 5 m. Although practice proves that the distance should be from 10 to 25 m.
- Installation site should not be in a ravine. Rainwater and melted snow can get into the installation, and the septic tank will not be able to perform its cleaning functions.
Installation "Bioxy"

- Preparatory work has been carried out, the choice of model and installation site has been made. Our next action? According to the size of the selected model and the depth of passage of the sewage system, we dig a pit in the ground.
- Prepare the bottom of the pit. If your site consists of sandy soil, then the bottom of the pit must be tightly tamped. Remove stones and debris so that they do not damage the bottom of the structure. On condition of solid soil at the bottom of the pit we pour a pillow of sand and gravel about 10 cm.
- In parallel to the trench we supply a protected power cable. We select its section according to the power consumption of the electrical equipment of the septic tank.
- In a ready ditch we establish a septic tank. The cover should be 20 cm above the edge of the earth. This condition is above
- The installed septic tank is connected to the power cable and the pipeline. In case of irregular electricity supply, it is necessary to install an additional power supply source. Sewer input should be one, therefore having several buildings equipped with sewage, we combine it into one and only then we make the connection.
- We begin to fill the pit. The septic tank, as it falls asleep, is filled with water. This is required for the distribution of uniform pressure on the walls of the structure.
This process of our work on the installation of the septic tank "Bioxy" completed. After three months of use, maintenance is required. It consists in pumping sediment pump, included in the device. During pumping, we perform cleaning of the walls. After five years, the secondary chamber is cleaned. After ten years, we perform an audit of the aeration unit. With proper performance of all work and timely service, the Septic "Bioxy" will serve you for a long time and will not give you much trouble.

If you do not want to do the installation yourself, you can contact the company that performs this service. A specialist will come to your site to complete the drawing and make an estimate. After signing the contract, the company will deliver the design itself with the component equipment and install it. But this decision is already your own choice.
We also recommend that you read the articles from which you will learn about other septic tanks:
- How to install a septic tank Tank.
- Installing a septic tank with your own hands.
- Autonomous sewage in a private house with their own hands.
Video
Thanks to this video you can learn more about the Bioxy Septic Tank: