Furniture pipe: destination and types

In the manufacture of furniture in recent times very often began to resort to such material as the pipe. The fact is that it has high strength and at the same time has a relatively low weight, which can allow to replace a lot of other parts. However, many craftsmen prefer to completely make furniture from polypropylene pipes with their own hands, using even plumbing systems for this purpose.

Varieties and Manufacture

To begin with, it is necessary to say that nickel-plated metal fittings are used very rarely lately. It is too expensive and just huge for this work weight. Therefore, nickel-plated pipes for furniture are often made of plastic, since it does not have sufficient strength and is lightweight.

Decorative items

• Virtually any furnishings need additional elements that will give them a good appearance or suit a particular design.. In this capacity, decorative furniture pipes are often used.

• This material may be in the form of special linings or individual elements mounted on the facade.. They also often serve as a plating if furniture is made from a shaped pipe.
• It is necessary to say that all such parts are purchased in the kit.. Moreover, furniture plugs for pipes and other segments of such decor should have the same appearance with the original product or correspond to a specific design.

Tip! Even if such a structure is made of metal, it does not mean that it can be used for load distribution. Such elements are very fragile and sometimes even a minor mechanical impact can cause damage.

PVC Products

Very often, some craftsmen and even designers create their own furniture from PVC pipes. Such furnishings have an original appearance and, with the right layout, can fit into any decor.

It is worth noting that furniture made of PVC pipes has a rather specific appearance. However, not all interior elements can be created in this way. Usually, experts make tables, chairs, shelves, or small racks, but you can make larger-scale things from this material.

Quite often, furniture from water pipes serves as the basis for a peculiar design. Therefore, for such solutions you need to create not one unit of production, but a whole headset.

Making furniture from plastic pipes with their own hands, you can use ordinary plumbing systems. Recently, however, materials that have been specifically created for such works have begun to appear on modern markets. At the same time they have a special coating that will give the final product a good appearance.

Typically, a material with a diameter of 50 mm is used to create pipe frames. It is more durable and can withstand heavy loads. To create jumpers used material with a diameter of 25 or even less.

Tip! When performing this work it is very important to prepare a good drawing of the future construction. It is necessary to take into account all possible loads and connections.

Recommendations of the masters

• For work it is best to use materials that are based on glue joints of pipes. Their price is much lower than that of other similar products, and the joints have a pretty good appearance.

• If in the manufacture of such structures it is necessary to make weighting of some parts to increase stability, then you can use metal reinforcement, which is placed in the cavity. However, an additional seal should be made in order not to observe the play or movement of metal in the product during operation.
• If the work is done by hand, then in addition to strength, you need to think about the appearance of the product. Even the most durable and reliable chair will not be suitable for indoor operation, if it will spoil the interior.

Conclusion

After studying the video in this article, you can examine in more detail these products and their scope. Moreover, on the basis of the article proposed above, it should be concluded that plastic pipes are one of the most popular materials that can be used not only in the construction or creation of a water supply system, but also in the manufacture of furniture.