Gas pipes in the kitchen and features of their installation
The distribution of gas pipes in the kitchen is most often done before the building is commissioned and is planned at the design stage. But sometimes a situation arises when, due to the rearrangement, the location of the pipe needs to be changed, in this case it will be necessary to know a number of requirements for this type of work, since any violations are strictly punished by the controlling authorities due to the increased danger of the communications under consideration.
Basic requirements for work
As noted above, gas pipelines are subject to increased danger, so any operations performed, be it a design change or pipe finish, must meet several requirements:
| Security | All elements of the system must meet a number of standards. It is very important to use only high-quality materials and components when working, because safe operation of a gas pipeline largely depends on this |
| Reliability | It is very important that all the work is carried out only by qualified specialists, this guarantees an excellent end result. Gas pipes must be strong to withstand even high loads and deformation effects |
| Compliance with the requirements | Design and installation of the system, even if the gas pipe is transferred in the kitchen, rather than new construction, it is required to create a complete project that will reflect the new position of all elements. Most often, such plans are made by the manufacturers of works, as it is rather difficult to do everything with your own hands, not knowing the rules and regulations. |
| Practicality | The gas pipeline should not interfere with other communications; also, the pipes should be accessible for inspection, which is carried out by the regulatory authorities once a year. It is important to arrange the system in such a way that it creates a minimum of noise for finishing and installing furniture. |
Basic rules for arranging a gas pipeline in a house
In order to conduct gas, you do not need a lot of time and effort, since you don’t need to do almost anything on your own; everyone should be trained by qualified specialists. The price of their services is quite high, however, doing everything yourself is prohibited.
This instruction will tell you the correct order of preparatory and work activities so that you are aware of the features of the work, if only to control the workers.
List of events
As part of this phase, the following activities are needed:
- The first step is to contact the service organization at the place of residence. Even if they are not engaged in installation work, they will recommend where to turn in order to get expert help in this matter.
- Next, a statement is written, on the basis of which a specialist arrives to you, who will conduct the initial inspection of the premises.
- The specialist examines the premises and carries out the necessary calculations to comply with the norms for the gas pipe in the kitchen. Sometimes a complete rework of the project is required, and sometimes it is possible to get by with the refinement of an already existing plan, it all depends on the scale of the system reorganization.
- Next, an estimate is made, and if you agree with all the conditions and amount for the work, you must pay for the services of specialists, after which they must complete all the works in accordance with the project within 1-5 days (depending on the terms stipulated in the contract).
Tip! Remember that this kind of alteration is associated with the use of welding equipment and power tools. Care should be taken to protect all surfaces from heat damage and other adverse effects.
- When all the activities have been completed, you should be handed out a Certificate of Completion and make the appropriate marks in the project that every homeowner should have.
Gas Pipe Transfer Procedure
In order to move the gas pipe in the kitchen, the following list of works is carried out:
- First of all, it is necessary to free up space to ensure the safety of work, all coatings that may be damaged should be pasted over with any slow-burning material (burlap, tarpaulin, etc.).
- Before cutting the gas pipe in the kitchen, it is necessary to shut off the valve to stop the gas supply, after which the system is additionally blown to remove residual gases. This is necessary to ensure safety and to minimize the risk of ignition.
- Further measurements are made, and the place where the pipe is cut is determined, in some cases bending of the pipe is required, special devices are used for this, or the element is heated and bent.
Tip! To ensure tightness, this technique is used: the pipe is cut off, its end is carefully welded, after which a hole is drilled in the right place and a pipe or fitting is welded to attach the flexible connection.
- It is important that all conclusions be as close as possible to the sources of gas consumption. To simplify the process, a flexible connection is used - a bellows pipe, but its length should not exceed 2 meters.
- After completion of work, the system is checked for tightness, only after that it can be put into operation.
Tip: the created decor gas pipe in the kitchen should not obstruct access to it, so it is best to use the usual coloring.
Conclusion
From this article you learned that all work with gas communications should be carried out by specialists, primarily for your safety (find out here how to close the pipes).
The video in this article will detail some of the features of the process.