How to clean the pipe in the kitchen - we eliminate the clog

13-05-2018
Pipes

As a rule, perfect cleanliness is maintained in kitchens. But even the most accurate owner is not insured from an unpleasant smell, and quite often it is accompanied by difficulty in the flow. In this case, you will have to decide how to clean the pipe in the kitchen.

Unpleasant smell from sewage

Causes of unpleasant smell in the kitchen

In most cases, deterioration of runoff and unpleasant smell are related. A sewage pipe can be clogged with food debris, hair, and deposits of frozen fat on its walls can worsen the flow. As a result, in the area from the drain to the water seal, rotting of garbage can begin.

Without the use of a special waste shredder, sewage clogging is guaranteed

The smell of pipes in the kitchen is a clear signal that the sewer pipe can become clogged in the near future. Therefore, it is better not to take matters to the extreme, but to immediately identify the problem area and clean the pipe.

There are exceptions to this rule. For example, if the kitchen is rarely used, the water jam in the siphon begins to evaporate, and the smell is also far from pleasant.

Note! To solve this problem, you can simply dripping ordinary oil into the drain. The oil film will not allow water to evaporate, as a result, there will be no odor in the kitchen and the water seal will not dry out.

How to defeat sewer blockage?

The question of how to clean the sewer pipe in the kitchen should be addressed as soon as there was an unpleasant smell in the room, even if there are no problems with the drain. First you need to inspect the visible part of the pipeline, perhaps, the junction is just flowing slightly and the problem can be solved by sealing it. Otherwise, you will have to clean the pipeline.

Before cleaning the pipeline, check the tightness of the joints.

If the smell of decay is accompanied by deterioration of the flow, then to solve the problem, you can use one of the following methods:

  • use chemical cleaning agents;
  • using a manual hydraulic pump;
  • clean the pipe with an ordinary plunger;
  • use for this plumbing cable;
  • disconnect the siphon and clean it with your own hands;
  • hydrodynamic cleaning will help in advanced cases.

Note! Sometimes the cause of regular blockages becomes too steep a knee siphon. In this case, his replacement will help.

Use of chemicals

When using special gels and powders, the main thing is to correctly determine the cause of the blockage. Thus, alkaline preparations are suitable for fighting fatty deposits on the walls of the sewage system, but a weak acid is used for more serious blockages. Special gels in addition to partially dissolving the blockage, also act as a lubricant.

Sewerage cleaner

Note! It is forbidden to use alkaline preparations and acid at the same time. In this case, the removal efficiency of the blockage will be close to zero.

As a rule, the effect of such drugs is manifested very quickly, it is enough to pour a small dose of liquid into the drain and wait a bit. If the drain itself has not recovered, you can try using a plunger.

Use of hydraulic pump

If the pipe is clogged in the kitchen, you can try to break the cork out of the garbage using the pressure of the water flow. And to create the desired pressure using a manual hydraulic pump. This device looks like a cylinder with a lever and a hose that is inserted into the pipeline.

Hydraulic pump

Work with the hydraulic pump should be in this order:

  • the hose is inserted into the pipe until its end hits a blockage;
  • water is drawn into the cylinder;
  • pressing on the lever creates the necessary pressure.

A jet of water under great pressure just blurs the blockage. The principle of operation of the hydraulic pump is similar to the work of the apparatus for hydrodynamic cleaning, the main difference lies in the size of the pressure.

Work with the plunger

Plunger - a classic answer to the question of how to clean the pipe in the kitchen. When working in a pipe, a pressure drop is created, which can destroy the blockage.

Note! When cleaning the pipeline, the water should cover the rubber part of the plunger. Otherwise, all the work will go down the drain.

By itself, a plunger is ineffective. To ensure that the pipe is cleaned before using the plunger, you can pour the chemical cleaning agent into the drain, and afterwards work with the plunger.

Plunger cleaning scheme

It is necessary to make several sharp jerks, pushing water into the pipeline. If after several cycles of such operations the stock has not resumed, then it is better to switch to other methods of cleaning.

Experts do not advise the use of powder products that recommend falling asleep in the drain and leave overnight. They are quite effective, but a plastic sewer pipe may suffer. As a result, instead of fighting clogging, you will have to change part of the pipes.

Use of plumbing cable

Plumbing wire will cope with almost any type of blockage. This device looks like a thin cable with a tip, and a handle for rotating the cable is also included in the kit.

Instructions for working with sanitary cable looks like this:

  • the cable is gently inserted into the pipeline, due to the flexibility it easily overcomes all turns;

Note! Cable is better to introduce together. One person provides a constant tension of the cable, and the second - rotates the handle at a constant speed.

  • when the end of the cable stops moving forward, you need to pull it back and try to push it forward again. If this fails, then most likely he has reached a blockage;
  • after that, the nozzle is screwed into the cork out of the garbage and moving the cable back and forth to break the tube. Stock is guaranteed to be restored.
In the photo - the use of sanitary cable

Clearing a water seal

If there is nothing of the above means at hand, then you can simply try to clean the siphon manually. Some models are equipped with a valve for easy cleaning. If it does not exist, and the siphon itself looks like a pipeline in the form of the letter S, then it is simply dismantled and cleaned manually. If there is no serious blockage in the water seal, you can dismantle the visible part of the pipeline and clean it.

Cleaning the siphon will help solve the problem of unpleasant smell

Nowadays, many are trying to hide the pipes in the kitchen (for example, using a plasterboard partition). In this case, when deciding whether to close the pipes in the kitchen, it is necessary to provide access to the main nodes of the drainage system.

Hydrodynamic cleaning

It can be considered a universal way of cleaning the pipeline. In addition to high efficiency, this method is also absolutely safe, while the walls of the pipeline are cleaned along the entire length. True, the price of hydrodynamic cleaning is higher, because for this it is necessary either to buy special equipment or to call in specialists.

Diagram of hydrodynamic cleaning of the pipeline

To clean this way you will need: a device for creating a high pressure, a hose and a nozzle with holes.

The work is performed in the following sequence:

  • the hose is inserted into the sewer pipe and brought to the problem point;
  • the unit supplies water under high pressure, thanks to which the blockage is almost instantly eliminated;
  • to completely clean the pipeline, it is enough to stretch the hose through the pipeline with the water supply installed.

Summarizing

The unpleasant smell of sewage in the kitchen is quite common. Often this is due to clogging in the pipe. In this case, it is necessary to immediately clean the sewage system with any of the proposed methods.

A short video in this article explains the mechanism for removing obstruction from the pipe.