Plumbing as a guarantee of uninterrupted water supply at any

13-06-2018
Pipes

In the private sector, a situation often arises when during the coldest periods of the year the frost sticks to communications, and it can be very difficult to restore water supply. This problem can be avoided by installing a heated water supply pipe; with this option, the freezing of pipes and taps is practically eliminated, and an uninterrupted water supply is ensured.

In the photo: heating water pipes - the easiest option to protect the system

Advantages of using the considered option

The popularity of the heating cable is due to a number of undoubted advantages:

Easy installation Included is always everything you need for the most rapid and high-quality system assembly. You can do the work with your own hands, and it will take very little time, and the result will meet the highest requirements.
Efficiency Due to the fact that you can turn on the system only when necessary, the cost of electricity will be minimal. An even more economical option is the self-heating wire, which independently regulates the heating temperature, we will consider its advantages below.
Reliability Using the wire for heating the water supply, you exclude it from freezing even at the lowest temperatures. The main thing is to purchase a system of sufficient power so that it can provide effective protection in any frost.
Versatility The system can be used almost anywhere: indoors, outdoors, in underground and aboveground pipelines, etc. There are no restrictions and you can protect all types of water communications.
Security The design can function both outside the pipe and inside it. At the same time, the level of security is so high that the cable can be used even in communications designed to supply drinking water.
Reasonable cost The price of products of this group is very democratic, and if you consider that no earthworks are required, the savings increase even more, and the workflow is also greatly simplified.

Tip! Do not save and buy the cheapest options. It is better to opt for products of well-known, well-established manufacturers. As practice shows, more expensive models last much longer.

The products of the Devi brand are notable for their democratic price and high enough quality, which is the reason for the popularity of this manufacturer.

Types of products and features of their installation

It should be noted that there are two main versions of products on the market, each of them has its own characteristics, which we will consider. There will also be described the basic rules that should be followed when laying the system.

Cable types

The first option is a resistive wire, its main features are the following factors:

  • The resistance along the entire length of the cable is the same, which ensures the durability of the system, since it never overloads.
  • The heating temperature is always constant, which is both a plus and a minus, because electricity is spent equally in frost and thaw.
  • The cost of products of this group is low, which allows you to arrange a heating system for pipes with minimal cost.
It looks like the design of heating cables with constant resistance

Self-heating options are used much more often due to the following reasons:

  • The semiconductor matrix of which the product is composed is characterized by reliability and stability of operation.
  • The system is completely autonomous, because the wire independently regulates the heating power depending on the external temperature.
  • The cable can be cut in any place, after which it is possible to connect it to the supply line.

Note! When you first turn on the system, power consumption will be several times higher than normal. Do not be alarmed by this, in the future all the indicators will return to normal.

Self-regulating system is able to regulate the temperature at each site separately

Features of the work

In order for the system to work as long and correctly as possible, it is necessary to carry out the installation following a number of recommendations:

  • Instructions for the work required to study. It will reflect all the basic safety requirements and rules of the device connections and connection to the electrical network.
  • All pipes and other structures must be cleaned of impurities., If the installation is done inside the structure, then there should not be liquid.
  • When laying a resistive cable, it is strictly forbidden to cross the veins with each other.. In the case of a self-regulating wire, intersections are allowed, since in these places it simply will not heat the surface.
  • Be sure to fix the position of the system with reinforced adhesive tape., this will prevent it from slipping and shifting when it falls asleep ground.
  • To protect the structure and prevent the occurrence of emergency situations, it is recommended to include in the system a protective shutdown device (RCD).
  • Cranes and other nodes need additional protection, they can be wrapped in several turns.
Water tap with heated water eliminates damage to the locking mechanism by frost

  • To ensure the best protection of the structure and increase the heating efficiency, the pipe with the attached wire is wrapped with aluminum foil, after which it is closed with pipe insulation and inserted into the metal corrugated casing. This not only increases the efficiency of heating, but also protects the system from damage.
Pipes for water supply with heating must be additionally warmed for the best effect.

Conclusion

The use of heating systems allows you to protect communications, while they work only when necessary, at other times you can turn them off. The video in this article will tell a few important nuances from the topic under consideration.

Categories