Stainless steel pipe: properties and scope

23-01-2018

Pipes

Products from stainless steel in modern construction are used quite rarely, which is associated with a very high cost and not always according to the specifications of a particular project. However, it must be said that this material in certain cases is very well suited for the manufacture of plumbing systems or some decorative elements. Moreover, the diameters of the pipe are stainless steel, which is used as the main component, usually correspond to typical products of this type, although there are peculiar exceptions that are used only for specific tasks.

Amateur photo, products of this type, created on the basis of stainless materials

Features and specifications

First we need to say that there are so many types of materials that can be classified as stainless steel. However, in order not to consider all the options, it is worthwhile to dwell on the one that is prescribed in accordance with GOST 9941 81. In fact, this is the most common product manufactured by the steel industry.

Very often, water pipes made of such steel are further processed to give them a good appearance.

Advantages and disadvantages

First of all, it is worth noting that the price of such products is quite high.. This is due to the characteristics of production and cost of components.

Applying a special coating will give the design an original appearance that is perfect for creating decorative elements.

It is also necessary to indicate that the polished surface of this product is achieved by long-term mechanical processing.. However, some types of metal may eventually fade. Therefore, in order to have a mirror surface, the finished structure is sometimes covered with a layer of chromium or nickel.
The main advantage of stainless steel products is the ability to resist the oxidation process, even with prolonged contact with water.. Given this, such pipes do not need an additional protective coating.

Special attention should be paid to the fact that in water supply systems a thick-walled pipe can be used.. At the same time it will not form a cork due to water from the plaque.
Recently, these materials are used for decorative design.. Particularly often used profile tube, because in addition to its appearance, it has good strength and is convenient for installation.

Tip! For each specific job, there is a steel grade that is most suitable for the selected application. Therefore, before you go shopping, it is worth exploring the choice of material in the local market.

Plumbing systems of this type require an appropriate fitting so that the appearance and functionality do not deteriorate.

Application area

In plumbing systems this type of material is practically not used. Modern assembly instructions usually involve the use of cheaper designs that have similar characteristics.

Interior elements made on the basis of such pipes look very good in almost any type of design.

A wide tube with a diameter of 76mm is often used in the manufacture of supports or racks, which are part of the facade. It will not only be able to withstand a high load, but will serve as a kind of decoration. However, it is better to apply a layer of chromium on the material, by electroplating.

Profiled square tube is often used to create frameworks of structures that do not require periodic paint treatment, but are in direct contact with moisture. Usually these are large greenhouses, greenhouses of pipes, etc.

Tip! Use of stainless steel material is only when there is no possibility to carry out periodic maintenance of the structure, and it not only carries heavy loads, but also has contact with water.

Some of these products are widely used in the automotive industry or in tuning cars.

Recommendations of the masters

If the work is done with your own hands, then you should immediately determine the method of fixation. The fact is that to connect by welding you need to have a special unit or certain electrodes. Even when cutting threads it is worth remembering that this metal has great strength, and you may need three taps and dies for processing pipes, for gradual passage.

In our time, such structures for organizing water supply are practically not used, because there is a cheaper alternative with no less qualitative characteristics.

Most experts prefer to buy ready-made systems with seats and mounting, than to do it yourself. Sometimes it helps to save not only time, but also money.
Such pipes are not very rare, but in some regions of the country they need to be ordered in advance, as the enterprises for their manufacture produce limited lots that have their own purpose.

Usually pipes made of stainless steel have thick walls, but as an exception they create structures whose purpose is to organize the appearance or for special functions.

Conclusion

After studying the video in this article, you can learn more about this type of material and its features. Also, guided by the text above, it is necessary to conclude that such products are gradually being superseded by modern products that are not inferior to it in quality and appearance.