Which polypropylene pipes are better: tips on choosing and

Polypropylene products entered our life relatively recently. At the same time, these materials have already managed to prove their quality and reliability in the field of creating water pipelines, since there are simply a huge number of types of such systems, which differ in both technical characteristics and installation method. That is why the question of which polypropylene pipe is best to choose for the implementation of a project.

Separation by installation method

First we need to mention that these systems are divided by the method of their installation. The fact is that the technical characteristics of these products are approximately the same, unless they are a special type.

It should be remembered that colored polypropylene pipes do not always display certain properties, and sometimes they are a peculiar trademark.

Solder products

First of all, it is worth mentioning that these products are of two types.

The former are connected with the help of special soldering irons, and the latter use special equipment for docking to obtain an end seam.

• Most often, green polypropylene pipes are used for such works.. The fact is that they are produced by a fairly popular company that actually developed and implemented such systems in our country. Therefore, their cost may be slightly higher due to the brand.
• The easiest way to use gray polypropylene pipes. They are great for working with a conventional soldering iron, since more expensive systems can use special equipment that is designed by their manufacturer.

Tip! The solder joint is essentially monolithic in nature, since with pressure under heating, the products are joined at practically molecular level.

Adhesive products

Typically, the classification of polypropylene pipes considers this type of product the simplest. However, it should immediately be said that such a connection is one of the most reliable. The fact is that the glue used for this work actually destroys the upper layers of the material in order to bind them together.

• Answering a question about how to choose polypropylene pipes of this type, experts recommend paying attention to the products of popular manufacturers. In this case, the adhesive must be of the same brand to avoid inconsistencies between the materials.
• It is important to mention that these products can be assembled by hand, without using special tools. Therefore, this type of design is very popular among beginner craftsmen or among people who make various crafts.

Tip! Open glue after a certain time becomes useless. Therefore, it is not worth saving and buying the half-banks in the market, which allegedly were used just yesterday.

Crimp Fittings

Usually multilayered materials, such as polypropylene pipes with fiberglass or metal-plastic constructions, use for their connection special couplings and limit switches for pipes, which are fixed with the help of a special crimp. The pipe is put on the brush, and a cut ring is put on top of it, which is clamped with a nut. As a result, under pressure, the strength of such a compound will only increase.

The same method of installation is used and cross polypropylene pipes. However, their pipe fittings can be made of other materials or have a combined fixation device.

It should be noted that these types of polypropylene pipes are excellent for making quick installation or when connecting additional sources of consumption.

Tip! When joining such materials is not allowed the formation of distortions or bends at least twenty centimeters from this place. Otherwise, it may cause leakage.

Additional Information

One method of installation can not separate these materials. The fact is that there are a number of additional factors that also characterize these products.

Special purpose

There is a mass of data systems designed for a particular type of work. A prominent representative of them are polypropylene pipes for compressed air.

Such material was specially developed for this medium and pressure.

• It is worth paying attention to the fact that some manufacturers produce their products, dividing them under hot and cold water. In this case, the product must be applied appropriate labeling.
• Some products of this type can tolerate various environmental influences and can be used for outdoor installation. However, their price is sometimes significantly higher than that of simple species.

Tip! For each type of work is to choose the material that is suitable for this most. Otherwise, you can get a poor-quality system or a large overrun in finance.

Recommendations of the masters

For each type of pipe has its own installation instructions that need to be carried out exactly.

Even if such work has already been done, it is worth further reading the instructions of the manufacturer of this particular material.

• It must be said that for each type of pipe there is a special fixture. It is made by the manufacturer and is usually used with this material.
• During the work with glue materials or a soldering iron it is very important to observe temperature condition, in a room which is provided by technical process. Otherwise, it increases the likelihood of marriage.

Conclusion

After studying the video in this article, you can learn more about the products of this type and their scope. At the same time, on the basis of the article conducted above, it should be concluded that all such materials are quite good and have excellent quality indicators. Therefore, their choice depends only on local conditions and personal preferences of the master.