How to choose a bathroom faucet

It is no secret that the bathroom should have a high quality faucet. This can be explained by the fact that every day in this room the tap is used repeatedly. That is why, in order to prolong its service life, it is desirable that it be reliable, durable and of high quality. How to choose a bathroom faucet, and how it can be, let's look at the article.

Types of devices

It is worth saying that the choice of the faucet for the bathroom should be carried out on the basis of its design features. Before buying a mixer, you need to decide on the amount that can be spent on its acquisition. Then it is advisable to orient in the manufacturer and choose the type of mixer: single lever, double valve, touch or thermostatic. Naturally, if an expensive mixer is purchased, it is better to invite a master who can install it in minutes.

Duplex

Such mixers can be supplied with an elastic gasket on the crane box or with a ceramic valve. If in the first case, the function of the locking element is performed by a soft elastic gasket, in the second case, the role of the locking element is played by two ceramic plates with holes. The latter option is more reliable, but also more expensive. At the same time, it is better to install such a mixer if there is a filter for coarse water purification in the system. If it is not there, and the pipes are old and the water is not of the best quality, stop the choice on a cheaper mixer, in which a crane with elastic gasket is installed.

Single lever

Single lever mixers allow for fine adjustment of temperature and water pressure and at the same time have a different design performance. Even children can manage this mixer. Mixers of this type are considered not only the most affordable, but also convenient. They produce two types:

• ball;
• cartridge.

Cartridge mixers are more demanding on water quality.

Thermostatic

Thermostatic faucets are convenient if there are children in the apartment. In such mixers there are two valves. One of them regulates the temperature of the water, and the other - the pressure. Remarkably, the water temperature does not need to be adjusted each time, if you set it, for example, at 38 °, then each time you open the tap, the water entering the spout will be exactly that temperature. This eliminates the possibility of burns.

In the absence of hot water, you can face the situation that the water from the thermostatic mixer will stop going completely.

Sensory

What really can not refuse touch faucets, so it is hygienic. In such mixers there is an infrared sensor for switching on the water supply - for this it is enough to put your hands under the spout. All is good, only there are two important drawbacks:

• Not all touch mixers allow you to adjust the temperature of the water.
• Dial bath from the touch mixer will be problematic, since the water supply after some time will stop.

Installation method

When choosing a bathroom faucet, you need to focus on the method of its installation. Currently, faucets that are mounted on the wall, side of the bath or the floor are in demand. Attractive can be built-in mixers or in the form of a cascading waterfall. Mostly they are installed in large bathrooms, where there is room for a secure fit.

The best options

To choose which one is better, you need to consider various mixer options.

A modern faucet should be compact, stylish, easy to switch to shower mode. Preference should be given to bath-shower mixers with high-quality coating. If in doubt, watch a video about various types of bathroom faucets, this will allow you to decide on a purchase much faster.

When choosing a faucet, it is important to check its complete set (faucet itself, shower hose, watering can, set of gaskets).

In expensive apartments or country houses began to install electronic mixers. The advantage of such plumbing in the presence of various modes of operation, as well as in ease of management. However, in the event of a breakdown, such a crane is almost impossible to repair on your own, since not everyone is familiar with the features of modern electronics. And the cost of such a device can be quite large.

The mixer should harmoniously fit into the design of the bathroom and be comfortable for residents. High-quality bathroom faucet with shower can be installed in any apartment, regardless of the height. Water through the pipes will flow not only into the spout of the mixer, but also pour under great pressure from the watering can. When choosing such a product, it is necessary to indicate the presence of a mechanism for switching the shower, as well as to correctly select the length of the spout.

If you purchase one sink and bath mixer, the spout should be large enough.

It is equally important to approach the choice of shower heads. It is recommended to choose watering cans with several modes of water supply (small jet, three large, one large).

Many are guided by inexpensive options for mixers, forgetting that the low cost of such a product often indicates poor-quality material from which it is made. It is best to buy plumbing fixtures made of brass, alloy steel or bronze. Such materials are durable and easily withstand sudden changes in temperature.

If you want to read the additional materials of the site, we suggest you read the following articles:

• How to clean the boiler Ariston?
• How to install a flush-mounted mixer?
• How to replace the mixer in the kitchen?

Video

If you want more information about choosing a bathroom faucet, then we recommend that you watch this video: