Installing the bidet yourself

Not all modern apartments are equipped with such sanitary facilities as a bidet. This convenient device, resembling a toilet, is an excellent means to support hygiene. If you are the owner of a large bathroom, then think about the need to install such a device. And we will tell you how to install the bidet with your own hands.

Bidets

Today on sale you can find a bidet of two main types:

• simple;
• with upward flow of water.

The first version resembles a toilet with a connected sink. The bidet can be installed on the floor or hung on special brackets to the wall. Such sanitary unit is connected to all communications in almost the same way as the toilet.

It is possible to find on sale the combined bidet with a toilet bowl - it is the simplest version. The device is a simple toilet with an installed faucet. This option is the perfect solution for small apartments.

A bidet with a "fountain" or with an upward flow of water has a more complex structure. For this reason, all major parts are assembled at the factory. Such structures are often equipped with a special lid, where water is circulated and heated. Therefore, connecting a bidet with a fountain implies an additional connection to the electrical network.

Recently, overhead type devices have appeared. Such bidet consoles are produced by Japanese firms. They are installed on the toilet lid.

We carry out installation

Installation of a bidet in your apartment can be divided into several stages. First, select a suitable place to install. Secondly, the device itself is being assembled. Then, it is necessary to connect to the sewage system, cold water supply system and (if necessary) hot water. The last connection is made to the electrical networks (if provided for by the device design).

• The first thing we choose a place. The first thing to consider is the usability of the device. In addition, do not forget that the bidet needs to be connected to sewage systems and cold and hot water (and some models require a connection to a household electrical network). Therefore, the installation site should be close to these communications. Buy in advance corrugation and flexible connecting hoses (for hot and cold water). When buying these devices, check whether their length is sufficient for connection to communications. Do not allow hoses to be taut.
• According to the enclosed instructions we make assembly of the mixer. The process itself is similar to a conventional sink faucet assembly.
• Then we install the mixer on the bidet, while installing a flexible hose. Tap fittings can damage the earthenware, to avoid this, put a small piece of rubber on it. The installation of the mixer itself is carried out using moon-shaped washers, studs and nuts. After installation, it is desirable to treat all joints with a sealant.
• Next is the installation of the drain funnel. These works are carried out by analogy with the installation of a conventional siphon.
• Now, also according to the instructions, we are assembling the bottom of the bidet.
• After that, you can install the device on your chosen place and fasten it to the floor (or to the wall, if required by the model). Installation is the same as in the case of the toilet. The bidet is installed in place, and marking is carried out. Then the device is removed and the holes for the plastic dowels are drilled. For these purposes it is better to use a punch. After this, the bidet is installed in its place and secured with bolts. Between the floor and the device is better to put a rubber gasket.
• The final step will be to connect all communications. Connections to water supply networks are made by analogy with the connection of the mixer in the sink (using flexible hoses). Corrugation is used for drainage to the sewage system. When installing it, it is necessary to observe the slope in the direction of the riser in order to avoid blockages.

As you can see, mounting a bidet will not cause big problems. If you install the device with an upward flow of water, it is carried out similarly to the process described above. The only difference is the assembly and installation of the water regulator, it is carried out according to the instructions from the manufacturer.

If the device requires an electrical connection, then it is better to entrust this work to an electrician. The bathroom is constantly high humidity, so the outlet must be reliably protected. If there are no power outlets in the vicinity of the bidet, they should be installed by a specialist.

Video

This video shows how to install a bidet with detailed instructions and tips. Watching this video will help you set your own bidet: