Cabinet with bathroom sink in modern interior

Design decisions in the design of premises for hygienic measures may be radically different. However, an important element of the current interiors is a bathroom sink with a bedside table, which, along with decorative features, brings functionality. The selection of such products is made taking into account the shapes, sizes and materials of manufacture.

The list of advantages of products

Products that combine a plumbing fixture and a piece of furniture can be successfully introduced into any style solution. The room looks the most elegant if it uses asymmetric sinks with a cabinet for the bathroom.

In terms of design ideas such products provide a lot of space for thought.

• Affordable price is a positive factor that allows you to expand the consumer circle.
• The variety of shapes, sizes and colors provides ample opportunities in the design.
• Ready-made structures are quite practical, therefore they serve for many years.
• Regardless of the method of installation, any model can be installed by hand.

Addition! Transportation can be significantly simplified if the bowl is separated from the bottom structure. Individually, these elements are much easier to carry than assembled.

Basic installation methods

Installation options are actually not so many, but they should still be considered to learn some features, especially since some models need a special approach. If the installation of such products will be made incorrectly, then it is unlikely that it will be possible to provide a high level of security.

Outdoor products

In this situation, separate legs or a solid base part, which completely covers the internal space, act as bearing elements. The first option is more often used in classic interiors, and the other in modern style solutions.

When installing furniture with legs, it is recommended to substitute soft pads under the supports, especially if the lower plane is covered with linoleum, laminate or other materials that are poorly resistant to point effects. In the case of analogues with a basement base, this is not required, since the support area is large enough.

Suspended structures

If the above-mentioned interior items can be installed directly on the floor, then this product is attached to the wall. In this case, the side surface should be made of sufficiently strong materials. Ideally, only a narrow sink with a pedestal for a bathroom can be fixed on a vertical plane.

To carry out the installation of such products, you must adhere to the following sequence of actions.

1. The marking is applied on the wall.. First, determine the height at which the structure will be located. After this, the locations of the elements for fixation are marked.
2. Dowel holes are made in the side surface with an electric drill.. If the walls were erected without the use of stone materials, then this stage is simply omitted.
3. Fasteners are embedded directly in the vertical plane at a certain depth.. Details for fixing are also installed on the structure itself, after which it is hung on prepared hooks.

Attention! Most often a wall-mounted washbasin is installed on a 45 cm wide bathroom cabinet. If the products with a large distance across are fixed to the side of the room, then you need to select a higher quality fastener.

A bit about size

In order to increase the level of aesthetic perception, the dimensions of the washbasin with the cabinet for the bathroom must be properly selected. The functionality of this device will also largely depend on them. The table below shows the width and length of the most popular models.

In small rooms, a washbasin is usually used with a cabinet for a bathroom 75 cm long and 45 cm wide. With such dimensions, it is possible to place other plumbing fixtures even in very small rooms.

Traditional forms

• The most popular cubic cupboards for sinks. When placed in a room, they do not take up much space. They can be successfully placed both at the long wall and at the short one.
• Cabinet in the form of parallelepiped have an elongated shape, therefore, more often they are located in narrow rooms along it. However, sometimes there are options with transverse installation.
• Cylindrical products are considered more refined.. They are actively used in the classical style, where most often there are no clear lines and rich colors.

Location options

Curbstones used for bathrooms can be installed on one wall or directly in the corner. The latter option provides an excellent opportunity to save space, which is important in the case of small rooms. Corner designs for sinks fit perfectly into the overall style solution, allowing you to increase the functionality of the rarely used part of the room.

Final part

The information provided allows beginners and designers to begin to understand what a bathroom cabinet is and is equipped with a counter sink. With proper use of this element of the interior, you can give the room not only an attractive look, but also to some extent extend the functionality. This instruction is complemented by a visual guide on the video in this article.