Contamination in the sink in the kitchen - methods of
Many faced such a nuisance as a blockage in the sewage system, and most often it happens in the kitchen for a number of reasons: from intensive use to draining food debris and especially fat that is deposited on the walls of pipes and over time causes the formation of garbage jams . In this article, we will not only look at how to eliminate the blockage, but also what to do to prevent its formation, especially since prevention activities are very simple.

Prevention methods
We will consider this information first of all, because the problem is much more reasonable to prevent than to deal with it afterwards. By following a few simple recommendations, you will several times reduce the likelihood of trouble with sewage in the kitchen, these are the main ones:
Reasonable use | It is not necessary to drain the remnants of soup and other dishes that have solid elements in the sink, it is better to use a toilet bowl, the passage capacity of which is greater. It is precisely this point that many forget and then are surprised that the system is only six months old, and there are already traffic jams in it, plumbers are most often blamed, and they are just not to blame |
Use of mesh at the drain hole | The price of this elementary element is simply ridiculous, while the reticulum allows all solid particles to be retained and prevent them from entering the siphon and the sewage system. Just put it on the drain and periodically clean up the accumulated debris, and your system will remain clean. |
Installing a quality siphon | Metal options are best suited for the simple reason that they can be washed with boiling water, which dissolves grease and washes it off. So you can not flush plastic siphons, which is why they are more often clogged. |
Periodic flushing | It can be done either with boiling water or with the use of special tools. Recommended frequency - once a week, if a special composition is used, all the nuances of the application will be prompted by the instructions on the package |
High-quality installation | It is best to make the waste system of plastic pipes, they are durable and not subject to corrosion, in addition, on their smooth surface less plaque forms. Pipes must be laid with the necessary slopes without sharp turns, as these are potential places of blockage. |

Remedies
If the problem did arise, then there are several options for dealing with it, consider the most popular ones.
Use of available tools
So, what can be done first:
- To begin with, it is necessary to remove water from the sink and disassemble the siphon, very often it is the cause of the problem, and simple cleaning and flushing helps to eliminate the problem. If everything is fine with the siphon, it is necessary to assemble it and use other methods.

- The simplest option is pouring boiling water, it allows the fat to dissolve and helps to remove jams, again, if the siphon is plastic, boiling water can be poured directly into the pipe, while being careful and careful.
- You can try folk remedies like Coca-Cola or drinking soda with vinegar, with simple clogs they can also help, but still it is better to use special formulations.
- The use of chemicals - the most common way to deal with such problems. When choosing a particular option, make sure that it is suitable for your type of pipes and does not harm them, most modern compounds are universal, but specialized ones come across, remember this.
Tip! This cleaning is best done in the evening, so that the staff will stay in the system all night and act as long as possible. In the morning hot water is poured into the pipes, and if necessary, the procedure is repeated.

Use of special devices
If the use of various formulations and hot water effect has not brought, you should use special options, consider them in detail:
- A plunger is a familiar device that is easy to use and affordable.. It is better that he was always at hand, just in case. It is very simple to use: there should be some water in the sink, a rubber part of the plunger is put on the hole, and consecutive up-and-down movements are made that cause excessive pressure in the pipes and help to destroy the garbage plug.

Tip! The most optimal and effective solution may be the use of a plunger in conjunction with chemical means for cleaning pipes. After the necessary time has passed, and the blockage in the system will become less durable, the plunger will help push the pollution much faster and more efficiently, just pour hot water to dissolve the fat and immediately start pumping the plunger into the system.
- For more efficient and productive work, you can use the modern version of the plunger, which is a large pump with a rubber suction cup. Just put it on the drain hole and shake the air, so you can create a much greater pressure in the system and disrupt the mud plug.

- Another modern version of the fixtures is special cleaning devices; they are a large pump that, due to the abrupt supply of a large volume of air, creates a hydraulic hammer in the pipes, thereby tearing blockages and removing them. This solution is not suitable for old pipes, as they can simply be broken by pressure.

- And finally, the most effective option for dealing with difficult cases is a plumbing cable, it can be both in a classic version, and modern - with a system of rotation. By and large, there are no differences in the modifications, it’s just an ordinary device to work harder, but its cost is several times less. Work is performed like this: the end of the cable is gently inserted into the pipe and pushed with simultaneous rotation clockwise.

Conclusion
In order not to spend forces on fighting blockages in the sewage system, it is better to prevent them. And if the problem has arisen, then you can deal with it with your own hands in a variety of ways, as you could see from this review.
The video in this article will vividly show some of the issues addressed.