Corner kitchen sink - convenient design for practical
As you know, a lot of time is spent in the kitchen, so its planning should be approached especially scrupulously and thoughtfully. Any little thing can significantly affect the comfort, so think over everything in advance and decide what arrangement will be used and where this or that equipment will be located. Corner kitchen sinks have appeared much recently, but already deserved great popularity due to convenience, functionality and space saving.
What should I look for when choosing a specific option
First of all, we will determine which criteria are most important in determining the optimal solution for your kitchen:
| Color design | The design should be combined with other elements in the kitchen or act as a bright original accent. In any case, it is very important that the color does not irritate you and your loved ones, this is the most important factor, because having a sink in the kitchen that you don’t like is not the best option, most likely you will soon replace it |
| Manufacturing material | Below we consider the main options in more detail. Here we only note the fact that whichever of the materials you choose, you should check its compliance with the quality standards set in our country. |
| Scatter design | It is important to consider the distance from the bowl to individual elements. Sometimes it turns out that they are so large that they do not fit on the countertop. Naturally, it is simply impossible to establish such an option. |
| Bowl depth | The deeper the sink, the greater its capacity and the more convenient it is to use it. Of course, you should not choose too deep options, the measure is important in everything, moreover, sometimes water filter systems or other equipment that can limit the space are installed from the bottom. |
| Mount type | Designs can be installed under the surface of the table top, can be mortise, and can stand on top. As practice shows, the mortise version is the most common and popular today, especially when it comes to corner structures. |
| Configuration | Each hostess has their own preferences, someone needs side wings, but someone does not use them. For some, the presence of several bowls is important, and someone is used to getting by with one, but roomy. It all depends on you. Therefore, determine the type of sink in advance. |
Note! When choosing a particular option, pay special attention to workmanship - the surface should be perfectly smooth, without any flaws. All edges and seams, if any, must be neat and carefully treated. Good manufacturers pay great attention to quality finishes, this is the easiest way to determine a good shell.
The main differences corner sinks
Consider what features make this option so popular and how designs may vary. There are many nuances, and you need to consider each of them.
Advantages over classic models
If we compare the corner sinks with the usual ones, then we can single out a number of undoubted advantages:
- The corner space under the sink is used more efficiently., since it can be used to make storage space for household chemicals, arrange a filter system, and this will not prevent the convenient installation of a siphon for the sink.
- The space can be occupied as one sink, and a design with two or three bowls of different size and configuration. This allows us to significantly improve usability and perform several types of work almost simultaneously.
- Small kitchen with corner sink is much more convenient.. In them, all elements are located compactly and ergonomically, which allows you to save such valuable space without losing comfort. And you can pick up a variety of options for washers that fit any situation.
Main design differences
First of all, it is necessary to consider what forms the structures can be:
- Classic rectangular, in them only the place of fastening of the mixer differs from the standard ones.
- Oval modifications are universal and can be located both on the straight and on the corner areas of the kitchen.
- Square options are set at an angle, so you can arrange a place for storing kitchen utensils (for example, a corner shelf) near the wall.
- Round configurations can also be classified as universal.
- Triangular and trapezoidal variants are also quite common.
- Various irregular shapes can help to use the space as efficiently as possible.
Manufacturing material
A very important factor that directly affects the strength and durability of washing, the most popular are the following options:
- Stainless steel sinks firmly hold the leading position in the market due to a number of positive properties: a reasonable price of products with a fairly good quality, a huge number of configurations and good resistance to high temperatures. Also of note is the fact that the surface is impervious to corrosion and is very easy to clean; the only significant disadvantage is the noise of the structure when water is poured on it.
- Products made of artificial stone or, as they are called, composite structures are also quite popular, although their price is noticeably higher than that of stainless steel. Instructions for their use is extremely simple, as the products are resistant to temperature extremes, resistant to shocks, their surface is difficult to scratch. In addition, these sinks are noiseless, and the abundance of color and texture solutions will allow you to choose the best option for your interior.
- Ceramic designs are rare, but for certain interiors they are just right. The material is durable enough, but is afraid of shocks, besides its cost is very high.
- Enameled products can be divided into two groups: steel and cast iron. The first option has a low cost, attractive appearance and a variety of models, the second is more durable and durable, creates a minimum of noise in the process of use. But both options in the event of chipping on the surface can corrode, which affects the appearance.
- The most top variants of products are made of a natural stone, most often it is granite. Kitchen design with corner sink made of natural materials is always different luxury and elegance and is suitable even for the most demanding customers. It is unlikely that it will be possible to install such an option with your own hands, since the shell is distinguished by a large weight, and any errors will lead to its damage.
If you will use an angular kitchen cabinet under the sink, then most likely you will need to install a stainless steel construction on it, especially in cases where the upper part should be completely closed by the sink.
Tip! Whichever material you choose, remember that the sink must be in harmony with the rest of the elements - the kitchen unit, appliances and wall decorations.
Conclusion
Choosing the optimal variant of the corner shell is much more difficult than it seems at first glance. This is due to the variety of models, colors and configurations of products. The video in this article will help to get to the heart of the matter even deeper, so that you can make the right decision in your choice.