Do-it-yourself shower: hiking, summer house options and

28-08-2018
Sewage

When there is a conversation about the manufacture of such a structure as a shower, then the masters usually imagine a cabin with a tray connected to the water supply, or on which they install a water tank. However, if the finished product can not be found, then you have to use any available material or products with a different purpose. Therefore, the question of how to build a shower with your own hands using the minimum number of elements required for this is interesting even for experienced specialists.

Amateur photo of a summer shower made of scrap materials

Hiking options

Going on vacation to nature, a person tries on the spot to provide themselves with maximum comfort. At the same time carry a lot of things should not be, and when you load the car are the mass of the necessary elements that you need to take with you. Therefore, a typical tourist shower should occupy a minimal space, have a small weight or be made of existing things with a different purpose.

Special shower system that can be carried

Shop Designs

Of all the existing models of systems for similar purposes, it is worth noting only one. It has the appearance of the usual dense package, to which is attached a small valve with a removable watering can and a hatch with a lid for filling. It should be noted that the price of this design is rather small, and it takes up minimal space, weighing almost nothing.

Marching design in action

Such a product is filled with water and hung on a tree. Then opening the valve, begin to use it as an ordinary shower. It is worth noting that the instruction manual allows the use of even hot water, but each particular model has its own tolerances.

Given the peculiarities of this design, it can be attributed to the marching. In this case, the similarity of this device, you can create yourself using a tarp or film.

Tip! Such a system can also be used to transport and store drinking water. Therefore, the need for her hikes is obvious.

Making a construction using a conventional canister

Homemade products

Most tourists make an elemental shower out of the canister with their own hands, while not damaging the product. It is enough just to have with you an extra cover in which holes are made in advance. It is put on after filling with water and used as a watering can.

You can also use large plastic bottles or other similar containers. However, with a strong need, the easiest way is to use a kettle, on the tip of which they put watering cans on and hang it on a tree. Such a shower in nature with your own hands can be built in a few minutes.

Tip! There are many ways to organize water delivery from a height, but you can only spray a spray from a watering can. Therefore, it is worth taking with you.

Variant of the simplest multifunctional dacha construction

Country constructions

Creating a shower on the site with your own hands, you have to face a number of problems that must be solved taking into account the terrain and the expected level of necessary comfort. Therefore, the manufacturing process should be divided into stages.

Typical wooden pallet that can be made by yourself

Pallet

  • The easiest way to make a pillow with rubble and sand, on top of which a wooden pallet is placed. So they usually do a shower in the village with their own hands, assuming that the drain will go straight into the ground.
  • Also quite common method of manufacturing concrete base. You can pour it yourself or use a finished slab for this. At the same time be sure to make a bias towards the intended diversion of water. Some craftsmen to simplify the work simply use stones that are tamped into the ground.
  • If you make a shower with your own hands, you can use any available materials.. The main thing is that it was easy to walk on them, even with water, and it was possible to organize a drain.

Tip! The outflow of water must be done so that the liquid goes into the ground, and not under the foundation of the building.

If you plan to use Eurocup, then you should take care of making a strong frame

Tank

  • When making a shower in the yard with your own hands, you should immediately think about what capacity to use for water. This is especially important if it is not possible to purchase a standard tank.
  • Immediately it should be noted that the barrels in which there were previously chemicals or petroleum products for these purposes are not suitable. They may remain sediment, which then dissolves in water and can lead to poisoning of the body.
  • Also do not use open containers. They can get sick birds or their metabolic products.
  • The easiest way to make a shower out of the EuroCube is with your own hands, since this container is great in all respects and at the same time has sufficient volume. However, it is necessary to take into account the heavy weight and use strong supports for installation.
  • The tank for such purposes is selected very carefully, because it is the basis of the whole structure and the appearance of the frame will depend on it.

Tip! It is quite simple to install a faucet with a watering can, but it is worth remembering that it is best to use a screw or needle locking mechanism. These systems allow you to precisely adjust the force of the head, which significantly increases the level of comfort.

Original polycarbonate fencing

Fencing

Some masters prefer to create the most simple overlap using ordinary film. However, if a solar collector is made for a shower with your own hands, it is assumed that the structure will be under the open sky and light will penetrate through it. This causes some discomfort for some people, since the internal space will be visible.

Given this feature, experts recommend using sheets of profile or moisture-resistant plywood. Also for these purposes, suitable dry reeds, which are tied with each other, creating a full overlap.

Tip! Sometimes old building materials are great for this task. However, they must be put in order and subjected to protective treatment. Ordinary paint may be suitable for this.

The simplest way to make a shower using a homemade glass partition

Constructions in the apartment

Sometimes there are situations when it is necessary to equip a shower in an apartment, but it is not possible to install a cabin. Then you can apply specially designed designs or non-standard technical solutions.

Simplest curtain can solve water splash problems

Bath

The easiest way to install a shower in the apartment with their own hands, if it is located in the bathroom. It is possible to use the bowl itself as a pallet, but in the places of its contact with the wall it is necessary to seal all the joints using a sealant. It is also assumed that the installed faucet will have a shower head, which will be able to be fixed on the wall.

Next is to buy a special fence or curtain that will protect the room from splashes. At the same time, it can completely cover the entire perimeter, or only a bath, which is a meter away from the mixer.

Tip! Such solutions are quite simple, since they have been used for a very long time, and for them, some companies develop a mass of products. However, when choosing them, you need to be very careful so that all the elements are perfectly combined with each other into a single system.

In some countries, practicing the joint installation of shower and toilet in the same booth

Restroom

Even nowadays there are still apartments in which there is simply no room like a bathroom. Also, there are situations when people buy a room in a hostel and want to get their own amenities, saving space. Therefore, in such cases a shower room is made in the apartment with its own hands, but it is connected to the toilet.

First of all, in such situations it is necessary to make a drain. At the same time, a drainage pipe is cut into the sewer pipe, which mutates into the floor screed with waterproofing, making it look like rainfall under a slope. Of course, the level of the threshold and the floor will greatly rise, but it is a necessity, to avoid which will not work.

Next, just install a faucet with a shower nozzle on the wall. In such a room you can safely take water treatments. In this case, a closed toilet seat will serve as a kind of chair, which is very convenient for some people.

Tip! This solution can be called extreme, but in certain technical conditions it is the only one. However, if it is possible to use exactly the cabin, then she should take advantage.

Even in a small room, you can install all the necessary plumbing fixtures.

Conclusion

After reviewing the video in this article, you can study in more detail these structures and the principle of their manufacture. Also, taking as a basis the text above, it is necessary to conclude that in almost any conditions, human savvy allows you to create designs that can significantly increase the level of comfort.

At the same time making a shower with their own hands from scrap materials, the masters take into account all the wishes of future users. This generates the most unusual designs with fantastic design and technical features.