How to choose a toilet lid - some useful tips

12-05-2018
Sewage

When buying a new plumbing for the bathroom, as a rule, the focus is on the choice of the toilet, the lid is not paid special attention. This is not entirely correct, because not only the appearance of the sanitary fixture, but also the comfort when using it, depends on the right choice.

Subtleties of the choice of a cover for a toilet bowl

Choosing the best material

Toilet lids can be classified according to several criteria, for example, the material used, the design, the shape and the dimensions.

Depending on the type of material, you can select the following types of covers:

  • wooden - a wooden lid on the toilet can be made of precious wood, there may also be options of plywood or fiberboard. As for plywood options, they can be attributed to the lower price segment, in the apartment to meet such a model is quite difficult. Do not contribute to the spread of plywood models and discomfort when in contact with the skin;
In the photo - an example of a wooden cover

Note! Covers from a single piece of wood cost a lot, for example, the price of a model made from natural bamboo confidently steps over a mark of 10,000 rubles.

  • plastic - Polyvinyl chloride, polyethylene or polypropylene is commonly used. The lid and seat are quite tough, easy to clean, weigh little. The care instructions are quite simple - from time to time you just need to wipe the surface of the plastic with a cloth moistened with a disinfectant solution.

Note! When choosing a model from ordinary plastic, it is necessary to take into account that this material is distinguished by its low resistance to abrasion, therefore scratches and cracks are common. Over time, such a surface can become resistant yellow shade, it will be impossible to remove it.

Plain plastic cover
  • duroplastic analogs can also be formally classified as plastic, but in terms of properties such material is much closer to ceramics, therefore it remains clean even after long use;
  • toilet lid foam ideal if the toilet is located in the courtyard. Even in cold weather, the person will not experience discomfort when the foam comes into contact with the skin. In such models, only the seat is made of foam, and the lid itself can be either plastic or wooden;
The foam has a low thermal conductivity, so it is great for the seat.
  • soft coated models. In such covers the rigid frame is covered with a cloth with a filler. Of the advantages it can be noted, except that pleasant sensations upon contact with the skin, the minuses are much more. Any fabric wears off over time, besides, the issue of hygiene is particularly acute, the fabric has to be periodically washed, and this does not contribute to durability. This model is quite possible to do it yourself.
It looks beautiful, but in the toilet is not the best option.

As for how to make a soft lid on the toilet itself, it may be advisable to simply sew a cover on the simplest model purchased case and fill it with a soft filler, for example, foam rubber. In this case, it is desirable to make the cover removable (with zippers or buttons), which will allow in the future to wash it without any problems.

What you should pay attention to when choosing

Once you have decided on the material from which the lid should be made, you can proceed to the selection of a particular model.

It should take into account:

  • dimensions - if it exceeds the size of the toilet bowl, then in the near future a replacement will be needed;
  • form - it should correspond to the outlines of the bowl of sanitary equipment. It would be foolish to try to install round toilet covers on a sanitary device with an oval bowl;
  • the decoration and color - the toilet is also an interior detail, sometimes an intricate pattern on its surface will complement the restroom decor.
A beautiful picture on the top of the lid diversifies the restroom interior.

How not to miss with size

If a toilet is installed in a flat that is not square or round in shape, then the question of how to choose a toilet lid by size may puzzle the owner - it’s not entirely clear what exactly needs to be measured.

Schematic showing all sizes.

In fact, in the store in the selection of new items you need only 3 sizes, you need to know:

  • distance between mounting holes;
  • width - measured in the widest part;
  • the distance between the outer edge of the cover and the line through the center of the mounting holes.
Sizes you need to know when choosing

Facilitates the search for a suitable model that most models of toilet bowls on the market of standard sizes. Therefore, the manufacturer is not so important - the main thing is that the dimensions correspond to the bowl of the toilet bowl.

It will not be superfluous to think about the appearance of new clothes.

Here you have to rely on your own taste:

  • If there are children in the house, you can choose a model of fun, bright colors.
  • If the restroom is decorated in a strict style, then the lid should not overflow with all the colors of the rainbow.
  • If dark calm colors prevail in the bathroom, then a white toilet bowl with a black lid will look good.
An example of a successful combination of black and white

High tech

The simplest models of covers do not provide any additional functions. But if the budget allows, then you can pay attention to the model, equipped with a number of useful additions.

Attention deserve:

  • models with a microlift - the toilet lid lift allows it to close smoothly without hitting the toilet, you just need to gently push it. The design of the lifter copies the work of the door closer;
  • seat heating function - it is not enough to sit down on cold plastic, the heating system will not allow the surface temperature to drop below 30-36? С;
The cable for connecting the cover is visible
  • On sale there are models of lids for a toilet bowl with function of a bidet. In some models, even heated water is implemented. With such a lid, even a simple toilet can be turned into a 2 in 1 device;
  • The smart toilet lid stands alone - the list of additional functions directly depends on the manufacturer.

The simplest electronic models are equipped with a motion sensor and are capable of independently opening when a person approaches. After that, the lid closes also on its own.

A more advanced electronic toilet lid comes with a remote control and has an impressive array of additional features. Such a model can be customized individually for male / female washing, nozzles change their position and water pressure, hydromassage is possible, etc. Such covers are high-tech devices, respectively, and they cost a lot.

Smart Cover Device

If there is a child in the house

In principle, there are separate toilet bowls for children, the size of such plumbing fixtures takes into account the small height of babies. But, as a rule, parents are limited to buying a special lid on the toilet with a pattern and fun colors.

The main difference between children's models is somewhat smaller internal dimensions. This is a necessary measure, because a small child is simply physically unable to sit comfortably in a seat that is suitable for an adult.

The perfect solution if there is a child in the house

Note! Do not be amiss to make small elevations on the sides of the toilet. This will allow the child to put their feet on them and calmly go about their business.

Summarizing

It is sometimes more difficult to choose a suitable lid for a toilet bowl than to decide on the sanitary fixture itself. From the proposals just dazzled in the eyes, but no need to succumb to the tricks of marketers, the selected model should be as comfortable, durable and fit into the budget. The proposed information will help not lose with the choice.

The video in this article shows the work of a modern electronic toilet lid.