How to clean sewer pipes at home to return the system to

02-07-2018
Sewage

It is difficult to imagine a person who would not face such a problem as cleaning sewer pipes at home. Over time, the highway can become clogged, so everyone should know how to deal with it.

In this regard, we decided to provide you with such useful information.

Occasionally problems with plumbing fixtures may occur.

Causes of blockages

To determine how to clean the sewer pipe in a private house, you should familiarize yourself with the theoretical information. It will allow to understand many issues.

There are many such reasons for sewer blockages. They must be known in order to produce preventive measures if possible.

Therefore, our instructions first consider this aspect.

  • Of course, the main reason is improper operation of the system (for example, throwing debris into the toilet or sink). Therefore, if you do not want the cleaning of sewage pipes in a private house to become a habitual occupation for you, then learn how to properly use the drain system and household members to this, too, accustom.
If you do not want to suffer, like this person in the photo, then follow all the rules for using sanitary ware

Tip: this problem is partially solved by a strainer installed on the drain. He will delay a solid part of the items that should not fall into the highway.

  • Another important factor is the predisposition of the material from which the system is made to the formation of deposits.. Here, the cast iron looks like an outsider, as it quickly becomes clogged. It is also worth noting that it will be quite difficult to disassemble such a highway with your own hands if you do not have the proper experience.
  • Also, do not forget that over time, fat deposits reduce the cross section, which naturally increases the risk of blockage. Cleaning sewer pipes in a private house should be carried out regularly. It is about prevention with the help of various chemicals - as a result, you will never run into serious problems.
Today in hardware stores you can find countless different cleaning products.
  • System damage or wear. This happens mainly in cases where there is poor-quality plumbing.
  • Freezing and soil displacement - This is the rarest case, but you should not forget about it either.

Cleaning methods

If you do not know how to clean the sewer pipe in a private house, then the information below is for you. There are several possible ways that we will certainly consider.

Chemical

It is one of the most common methods due to its availability. Now you can find a huge number of different compositions, while their price is very affordable (the most expensive tool costs no more than 600 rubles).

In order to achieve maximum efficiency, follow a few simple recommendations:

  • The compositions are acidic and alkaline. It is strictly forbidden to mix them with each other, because it would entail irreversible consequences.
To pour the solution into the pipes, use a funnel.
  • If you have plastic pipes, then pick up a tool that does not exactly corrode it.
  • These substances are poured into the drain hole. After waiting 15 minutes, you will need to wash the mixture with plenty of water.

It should immediately be said that this technique does not give one hundred percent effectiveness. It is more reasonable to apply it more likely for prevention, rather than for elimination of serious sewer blockages. In such situations, more advanced options come to the rescue.

Hydrodynamic

It is the most effective method to fight even very serious blockages. It implies the use of a special apparatus that supplies water under high pressure. This mechanism gives the strongest jet, which easily removes all deposits.

Note! Such a device can be used with a pipe diameter of 5 to 30 cm.

Alternative methods from improvised means

Not everyone knows that cleaning sewer pipes at home can be done in the simplest ways, the so-called folk. Let's look at some of them.

Here you can see a schematic representation of how it works.

Vantuz

Perhaps the most famous tool in this area is the plunger. It is quite simple to use it: we cover the drain hole with a plunger, lower some water and make sharp vertical movements without tearing it from the surface.

When the water is gone, it is advisable to immediately perform additional washing with plenty of water. In most cases, this technique gives positive results.

Soda

It is difficult to count how many destinations this white powder carries. In this case, its acid component benefits.

So, do the following:

  • Remove the siphon, clean it.
  • We put it on the place and pour 250-300 grams of soda into the sink (this is about half a pack).
  • Next, pour in a bottle of vinegar.
  • As a result, a strong chemical reaction will occur, which is likely to eliminate the problem.

Cable

You can also make a cleaning with a cable, but this measure will require a supply of physical strength. However, the effectiveness of this method is very high, so it is worth it.

So, it is carried out as follows:

  • A long cable is taken with a handle at one end. An end that does not have a handle must be pushed into the drain hole. This should be done slowly and carefully, so as not to harm communications.
Here is a simple device allows you to get rid of many problems
  • Continue this procedure until the cable runs out. Pull it out very carefully.

As a result, in 95% of cases, this method gives a positive result.

findings

On such a positive note, we summarize our narrative. However, we made sure that you could get the most complete set of knowledge.

In the presented video in this article you will find additional information on this topic, which will allow to understand all the intricacies.

Categories