How to eliminate the clog in the sink: professional advice
The sewage system connected to the sink usually has a diameter of 50 mm and, at the same time, a special siphon with a hydraulic gate is installed at the entrance to it. This design is necessary so that the smell from the pipe does not enter the room, but it is she who most often causes traffic jams. Given this, the question of how to eliminate clogging in the sink is one of the most popular among modern housewives.

Different methods
First you need to say that with proper operation and with periodic care, such a system does not need to be cleaned. If you install a special fine mesh on the sink, periodically apply special formulations and do not pour waste into the sink, then it will last a very long time without intervention.
Therefore, first of all, the manuals explaining how to clean the clog in the sink, it is recommended immediately after carrying out this procedure to use all available means to care for sewer systems.

Mechanical method
- Most often, for such work is used ordinary plunger. Instructions for use, telling how to clean the sink from clogging, recommend using it at the first stage of work. At the same time, modern models of this tool have recently emerged, which differ in shapes, design and efficiency.

- Typically, the plunger is installed on the drain hole and progressive movements create a vacuum to help remove obstruction from the sewer.. It is worth noting that there are electrical appliances with a similar principle of operation and most of the manuals explaining how to remove the clog in the sink recommend using them.
- Special attention is given to a special cable from one end, which is installed on the brush, and on the other side a handle is attached to create a rotational motion. Such a tool must be placed in the system from the side of the drain to the stopper and rotating to begin cleaning. In this case, usually the master, telling about how to clean the clog in the sink, argue that the cable must be introduced in small pieces using the handle all the time.

- Sometimes a thin hose is used to eliminate such problems. It is immersed in the pipeline from the side of the drain and is supplied with water pressure. Special attention should be paid to the fact that the manual telling how to clean the sink from clogging, recommends fixing a special nozzle at the end of the hose to increase the pressure and form several jets coming in different directions.
Tip! To facilitate the work or complete solution of the problem, simply unscrew the cover on the siphon or open the inspection hatch on the knee, which forms a hydraulic valve. Sometimes heavy debris accumulates there, which is often the cause of blockage.

Chemical method
Some instructions telling how to get rid of a clog in the sink recommend using special compounds or mixtures that need to be poured into the system. They must eliminate the cork due to the contained substances.

Such compositions have a different formula and are intended for a specific type of pipe. Therefore, it is necessary to carefully examine all the recommendations given by the instruction of a particular type. If you make a mistake and use the mixture is not suitable for existing systems, you can cause them serious harm or greatly reduce the life.
Tip! Professionals usually recommend using similar materials of two types. The first must be acidic, and the second must contain oxygen-forming substances. It is believed that such use will be as effective as possible.

Recommendations of specialists
- If the work is done by hand, it must be remembered that they are associated with performing rather dirty operations. That is why it is recommended to use protective clothing and gloves.

- Almost all the tips on how to break through the blockage in the sink are reduced to removing a certain obstacle from the water flow path, but sometimes you have to remove certain objects from the pipe. To do this, it is best to get a fishing line and a few hooks.
- For home use should not use industrial means of chemical exposure. Their price is quite high, and when working with such compounds, you may need additional protective devices in the form of respirators or even gas masks. However, they are usually developed for a specific material or specific conditions of use.

Conclusion
After studying in detail the video in this article, you can learn more about how to perform such operations and what tool for this you need to purchase. Also, taking into account the article outlined above, it is necessary to conclude that there are many means for solving such problems and it is desirable to have them available all the time, rather than start a search only when a problem occurs.