How to remove the stone in the toilet: practical

In this article we will talk about how to remove the limestone in the toilet and what are the main causes of this problem. The topic of the article is of considerable interest, since even the most modern and technologically advanced plumbing is not insured against the appearance of lime deposits.

These formations not only adversely affect the appearance of the toilet, but as they accumulate they limit the flow capacity of the drain. Again, lime deposits accumulate pollution and are a favorable environment for the development of potentially harmful pathogens.

So, how to remove stone plaque in the toilet and what are the reasons for its appearance?

Causes of lime deposits

It is enough to visit any store specializing in the sale of plumbing, and you will see how technologically advanced and convenient to use have become modern toilet bowls.

The effective form and availability of a number of options simplify not only the operation, but the maintenance of the device. For example, along with the usual modifications, toilets can be found on the market with an automatic drain function based on the use of infrared sensors.

But, unfortunately, despite the high technology, all these modifications are equally susceptible to the formation of urinary or limestone. The process of the formation of plaque is long-term, and therefore these changes are at first difficult to notice and take appropriate measures.

Among the primary causes of the appearance of a raid, we note the following factors:

• excess water hardness;
• irregular drain;
• too economical flush tank and as a result not enough intensive discharge;
• irregular mechanical cleaning of the toilet bowl;
• mechanical cleaning without the use of special detergents, softening and destructive plaque.

Preventing a problem is easier than fixing it.

In order not to look for an answer to the question of how to remove a calcareous stone in the toilet, it is necessary to take some measures that will keep plumbing in its original form for a long time.

• First, adjust the tank so that the water jet washes most of the internal volume of the toilet bowl.
• Secondly, get a special brush if there is none, and use this simple fixture after each use of the toilet.
• Thirdly, once a week do a general cleaning of the toilet with hot water, a brush and special detergents.

These seemingly simple and well-known rules will allow for an unlimited long time to keep the plumbing in its original form. Again, besides the fact that the toilet will shine clean, it will not become a hotbed of infection, and will not smell like a public toilet.

Now we know how to prevent pollution. But what if the problem has already appeared and requires an effective solution?

Ways to remove plaque

You do not know how to remove water stone in the toilet?

In this case, apply the following remedies, and your toilet will shine clean.

• If you do not know how to clean the stone in the toilet, try the effect of concentrated vinegar. Vinegar not only softens water, but also destroys hard sediments.
  

  The instruction for cleaning the sewage system involves the complete pumping of water from the drain so that the concentration of vinegar will act on the stone. Excellent effect guarantees the use of essences with a concentration of 70%. Bay acetic essence leave it for a few hours. After that we try to remove the deposit with a brush. If most of the dirt remains the cleaning procedure can be repeated.

• Looking for something to wash the stone in the toilet and many purchased tools do not help? Try the action of regular citric acid, which can be purchased at any store. The advantage of this method is that the water from the drain does not need to be pumped out. Just pour into the toilet about ten bags of citric acid and mix until dissolved. Mechanical cleaning of the stone can begin the next day.

Important: This method, despite its effectiveness, has a significant drawback - the toilet can not be used during cleaning.

• Interested in how to clean water stone in the toilet accessible means? Try the action of baking soda. Of course, this tool is not as aggressive as vinegar, but one pack is enough to eliminate the plaque in a day. Instructions for the use of soda is simple - the whole pack is poured into the toilet and slightly mixed in order to dissolve the product. Removal of pollution is carried out by a brush. For greater efficiency, the action of soda can be combined with the addition of citric acid.
• You do not know how to remove stone deposits in the toilet in minutes? Meanwhile, there is such a way. It is enough to pour electrolyte into the drain hole, which is used to fill car batteries, and after a short period of time you can remove deposits and have no doubt that the pollution can be easily removed.

Important: The use of electrolyte to soften lime scale is not recommended if the connection of the toilet bowl and sewage is made using plastic parts.

Use of specialized tools

Consider how to remove the stone in the toilet, using some specialized tools available on the market.

The price of these drugs is available to any buyer, and the effect of the application will be noticeable in a short time.

• Domestos Pink is a product presented in the range of Domestos cleaning products.

The drug is sold in a plastic container of pink color and is characterized by the content of highly concentrated chlorine. As a result, the tool not only removes limescale, but also effectively fights rust. In addition, the chlorine solution is suitable for bleaching the inner surface of the toilet bowl.

• Cillit is an agent containing hydrochloric acid, which corrodes pollution and completely removes lime and urinary stone.

Conclusion

As you can see, the pollution control plumbing can be done by hand using simple and affordable tools. There are questions that need clarification? More useful information can be found if you watch the video in this article.