Installing the toilet yourself: installation features

01-01-2018
Sewage

Buying a toilet, very often there is a question about its installation. The difficulties are caused not only by the internal mechanisms of the tank, but also by fixing the bowl. Given this, the installation of a toilet bowl is a phased process, divided into certain stages.

Amateur photo of the installed product

Assembly sequence

To begin with, it must be said that, first of all, the old construction is removed and the floor is leveled after it. Usually, when answering the question “what is needed to install a toilet bowl,” experts talk about the ideal surface and recommend working only after full installation of the floor covering. It will also get rid of the likelihood of cracks at the joints and difficulties with further finishing.

Graphic self-installation instructions

Bowl installation

  • First you need to decide what to put under the toilet when installing. However, some masters prefer to use special silicone pads, while others use very dense rubber, although there is also an option with a hard landing on the cement mortar. In this situation, you will have to resolve the issue yourself, since all the methods are good, but it is better to use the advice of the manufacturer of a particular model.
Some models of such products have a special design and need a specific installation.
  • It is believed that you can install a toilet without bolts. However, such technical solutions do not justify themselves, since a very fragile structure is obtained, which, if it is used excessively, will receive a not very good appearance.
  • Regardless of whether the installation of the toilet in a private house or apartment, fixing the bowl on the surface is best done using special valves, for this purpose. This may require a hammer drill or perforator so that you can make the necessary holes in the floor.
Fixation with special bolts
  • After the construction is fixed and the joints are wiped, the installation manual recommends connecting a sewer pipe. It is best to use a special coupling for this purpose, which can change the angle of inclination.

Tip! Before fixing the bowl or making holes in the floor, it is worth trying to temporarily connect it to the sewage system and find the most comfortable position.

Using a special sealant for sealing gaps and tighter fixing

Tank

It is worth noting that the height of the toilet installation usually does not play a big role if it suits all future users. However, it should be remembered that there are different in size tanks, which means that their dimensions must be taken into account during installation.

Graphic representation of the principle of connecting all systems

It is important to mention that if the toilet bowl was installed without bolts, the connection of the tank should be carried out very carefully and only after the complete solidification of the solution. In this case, it is necessary to be guided by recommendations for a specific model, since there are very different systems that differ in their design.

If you are installing the toilet without a transition coupling, special attention should be paid to the sealing gum, which serves as a gasket between the tank and the bowl. It should not be skewed or dirty. In the same models where a special coupling is used for the sewage system, you just need to follow the density of its fixation.

Tip! In constructions where special bolts are used for such an installation, one should be very careful when tightening them. Excessive physical exposure may damage the product.

It is best to use a special corrugation.

Drain system

When installing a new toilet, it is worth even before installing the tank to try to fix in it a system to drain water. This is especially important when applying a new or unfamiliar product.

So you can find out all the details of its installation, while focusing on the instructions.

The principle of installation in photographs showing responsible moments
  • If the work is done by hand, it is worth considering whether to purchase a special tool or use rags to protect parts from metal equipment. Given this, most of the craftsmen prefer to assemble using hand power, and only in especially important places they use the key.
Installation of the tank is a very responsible process.
  • It is important to remember that the price of such systems is sometimes quite high, which means that all work should be carried out strictly according to the instructions, so that during operation no defects would be found. The fact is that each specific model has its own principles of assembly, which must be taken into account.

Tip! When installing water supply pipes, it is necessary to immediately take into account the construction of the toilet bowl itself in order to carry out the correct connection and the required length of the hose.

Each model has its own characteristics and methods of installation, which means that you should study in detail the instructions that come with it

Conclusion

After reading the video in this article, you can learn more about the principle of installation of such systems and learn their features. At the same time, based on the article given above, it is necessary to conclude that each installation may be unique in its own way, but the guide for its implementation must always be taken into account.