Ready shower tray to give: product introduction and

13-07-2018
Sewage

In country houses for bathing water procedures are rarely used, which is associated with a rather limited space. The best option is to build a shower room, where you can comfortably perform hygienic measures.

In the process of work, special attention should be paid to the lower part of the structure, as it will be subjected to all sorts of influences.

The photo shows a ceramic product.

Information about the finished product

In modern markets, reasonably cheap shower trays are available for the dacha, and their range is very wide. They are not very deep bowls made using various materials. Their installation, if necessary, can be made in a short time.

Popular materials

Consumers when choosing should first of all be interested in what a particular model is made of, because the service life in certain operating conditions will depend on it.

Below it is proposed to consider the most common materials from which a shower tray can be made to give.

It looks like an acrylic pan.
  • Acrylic in the manufacture of such products is widespread. Products turn out practical as special leaving is not required in use. The material heats up quickly enough, and also keeps a certain temperature for a long time.
  • Ceramics not demanding in the care, but has excessive fragility, and therefore can not be used, where the surface are permanent mechanical effects. However, the pan for the country shower on the basis of ceramic materials may well be used.
  • Stainless steel It has high anti-corrosion characteristics, so various structures are made from it, which will be in a wet environment. At operation of products from a stainless steel rather strong noise is created.
  • Cast iron very often used for the production of sanitary appliances. The main advantage is the relatively low price of finished products. However, cast iron is a heavy material, so it can be difficult to transport and install.
  • Natural or artificial stone often used in interiors where it is necessary to combine aesthetics with practicality. Ready-made structures are able to serve for a long time, since the resistance of the material to mechanical and chemical influences is very high.
Natural stone products.

Recommendation! With a limited budget, it is better to choose a plastic shower tray for a cottage or a cast-iron equivalent. Products will cost fairly cheap, and it will serve for many years.

Forms and sizes

The configuration of structures of this type can be very different, which opens up opportunities for the implementation of various design solutions. Cheap shower trays for cottages are usually square or rectangular. This option is ideal for standard rooms.

For more sophisticated interiors, it is recommended to purchase structures made in the form of a circle, oval, polygon, or any other shape. They allow you to transform the room. Some models can be successfully entered into the corner zones.

This is how round products look.

When choosing a size, one should pay attention not only to the width and length, but also to the height, since the ease of use will depend on this parameter. The sides of deep bowls can exceed 18 cm. However, the installation of a pallet in a dacha shower with such walls is made quite rarely.

As for the linear dimensions, they can vary from 7070 to 130140 cm. The choice of sizes, as a rule, is done depending on the conditions of use and the preferences of the owner.

In the process of purchasing it is important to ensure that the kit is as complete as possible, otherwise some parts will have to be bought separately.

Consideration of the installation process

In most cases, the installation of a shower tray in the country with their own hands is carried out, as an independent installation allows you to save money, because there is no need to hire specialists.

To avoid serious mistakes during the work, a special instruction should be studied.

The process of aligning the bowl relative to the horizontal is demonstrated.
  1. Installation of legs of a design is carried out. They are usually shipped directly with the main products. Their adjustment is performed with a spanner.
  2. The base of the bowl is fixed to the side surface with a special adhesive composition that is included in the kit. The tool is applied to the side wall, which will be adjacent to the wall.
  3. After the glue dries, the joint between the side plane and the structure is sealed with a silicone-based hermetic, in order to completely prevent water from entering the place of abutment.
  4. A siphon is attached to the discharge pipe of the sewer system. All twisting elements are sealed with a special tape. This avoids leakage.
  5. When the shower tray is installed with your hands at the cottage, a leak test is performed. In the presence of stains, work is being done to eliminate them.
The installation process of the siphon.

Note! Beginners do not know how to install a shower tray in the country, so that during operation there is no strong noise. However, the problem is solved by introducing an assembly foam directly under the bottom of the structure.

Some advice on choosing

  • The parameters of the product must comply with the dimensions of the room and style, otherwise it will not be possible to fit this element into the overall design of the living space.
  • When choosing a model, it is necessary to take into account the peculiarities of the physiology of family members. If these points are not taken into account, then the process of exploitation for some individuals may become significantly more complicated.
  • It is desirable to purchase structures with a relief surface, as they are considered the safest. On a smooth plane, you can easily slip and get quite a serious injury.
  • If a shower is used for giving with a pallet and heating, then it is best to purchase models from materials that have good thermal conductivity so that the operation is comfortable.
The most popular pallet sizes.

As a conclusion

Detailed familiarization with the above information, which tells about shower trays and the process of their installation, will allow novice craftsmen to refuse the services of professional workers. The savings can be spent on the purchase of various accessories for the shower room (see also the article Ceramic shower tray - the features of this option and the technology of its installation).

The video in this article will help fill in some of the gaps relating to this topic.