Rectangular shower: choice, necessary tools and installation
The shower promotes relaxation, and it is very disappointing when the elbow, resting on the wall, the spray flying in all directions or the curtain, constantly sticking to the wet body, prevents the passage of this process. To avoid such disappointments allows the acquisition of a shower - comfortable and spacious. And the most popular model today is a rectangular shower 70x90, which is very compact, but at the same time, very convenient to use.
Features rectangular shower
The main features of this type of shower cubicle are listed in the table below:
| Feature | Description |
| Large variability of location. | Rectangular shower cabins 1500x700 with a deep tray can abut one, two or three walls of a bathroom. |
| Saving space and materials. | Most models have an impressive length (for example, 150x80), which makes it possible to install them between two walls. Such rectangular roofless shower enclosures can significantly save finances compared to prefabricated structures. |
| The ability to install doors of various types. | Rectangular shower cabins 110x80x210 can be equipped with the following types of doors: sliding, hinged or folding. |
| The possibility of installing two shower dividers - at opposite ends. | Thus, the time of taking a shower by one person is significantly saved, which makes the actual installation of a cabin for a large family. |
How to choose a shower
Today there are various sizes of rectangular showers. The most popular models are sizes 70x100 and 80x100. However, when choosing, first of all it is necessary to rely on the dimensions of the room.
You should also take into account the height of the profiles and the depth of the pallet, especially if you purchase a cabin with a high pallet. For example, in some cases, options with dimensions 120x80 with a high pallet do not fit into the dimensions of the room exactly in height.
What tools are needed when installing the cab
Installation of rectangular shower 120x80 with a deep tray under the power of one person. The basic principles of operation are the same for different types of cabs and are usually not very complex.
To work you will need the following tools:
- Drill.
- Screwdriver.
- Drill.
- Level.
- Cutter.
- Sealant.
Assembly work
Now we will consider how rectangular shower cabins are installed 150x85x2200.
In order to make the installation by hand, you need the following instructions:
- Installation begins with the installation of a pallet.. Before you install, you need to check a few points: the angle between the floor and the walls must be straight, that is, equal to 90 degrees; the edges of the pallet must lie flat on the surface of the walls; the bell of the sewer pipe should coincide with the drain in the pan.
Tip! Possible ledges of a tile or wall are leveled by placing wooden spacers.
- If all the nuances described above are met, we connect the lower part of the drain to the drain pipe. Joints process sealant. Also fill with silicone gaps between the edges of the pallet and the walls.
- Now you need to install the mounting profile. It is attached to the walls with dowels. In order not to damage the ceramic tile during the drilling process, it is advisable to stick a small strip of adhesive tape on it, which will prevent the ceramic surface from slipping and scratching. If wide joints are present between the ceramic tiles, the drilling locations can be chosen between rows of tiles.
Note! Before drilling the holes, it is necessary to check the wall with a detector, which will let you know if there are electrical wiring or plumbing at the drilling points. Also, in order to avoid splitting the tile, it should be drilled by turning off the impact function of the drill.
- We install and strengthen the mounting profile.
- Insert the frame and movable glass doors in the mounting profile, but do not fix it. Plastic corners should go into the grooves of the bearing profiles.
- Now align the frame using the level. It is necessary to ensure that the gap present between the doors becomes strictly vertical.
- After the booth is finally exhibited by level, it is necessary to drill the carrier profiles and connect them with screws to the booth frame.
- We wind up glass elements in a U-shaped profile, which is then sealed with screws.
- A small gap between the carrier profiles and the surface of the pallet must be filled with a gasket.
- Before you apply a layer of silicone, it is desirable to firmly fasten the supporting profiles to the pallet using adhesive tape.
- In order for the silicone joint to have a neat appearance, it is necessary to glue the masking tape on the top and bottom of the joint. After the joint is sealed, it is necessary to remove the excess silicone with an elastic spatula.
Tip! A fresh layer of sealant can be leveled by wetting the fingers in a solution of detergent.
Conclusion
Rectangular shower trays with a deep tray are preferred by many users because of their economical consumption of water, as well as for additional functionality: hydromassage, steam generator, aromatherapy, etc.
The price of such a device will depend, first of all, on the manufacturer, as well as on the functionality: the cost of simple showers, without additional functions, is acceptable for the average man in the street. You can find out more information about the varieties and the process of installing such booths by watching the video in this article.