Shower cabin with hydromassage, turkish bath, rain shower

In the plumbing market, special multifunctional devices are widely used, which allow you to take a top or cascade shower, as well as to use additional functions. Models may differ in design features, feature set and other characteristics.

Advantages and disadvantages of devices

Before purchasing this type of sanitary equipment, it is recommended that you consider some pros and cons to make sure that the product is suitable for specific operating conditions. Not in all cases the products will be the best option.

Positive sides

• Shower boxes take up relatively little space, so they can be installed in small rooms.
• The stylish design gives the chance to successfully introduce designs into any modern interiors.
• The versatility of the devices allows you to take water treatments with maximum comfort and health benefits.
• The cabin has a good level of sealing, so when washing the spray does not enter the room.
• These devices can be installed in combination with a conventional bathroom, if space permits.

Negative points

• Somewhat high price of products is the main drawback, but it mainly depends on the functionality.
• Some procedures can be taken only if the pressure of the central water supply exceeds certain values.
• There are certain limitations for hand washing, if it is not a shower cabin with a bathtub and hydromassage.

Note! The use of electronic functions such as basic and decorative lighting, hood and fan, as well as listening to the radio requires an electrical connection.

Consideration of the main functions

A set of additional features can vary considerably, and the cost of the final product will largely depend on the configuration of a particular model. Further, it is proposed to consider the most popular functions with which such products are supplied.

Wellness hydromassage

The procedure produced by the water flow, primarily aimed at achieving a therapeutic effect. In this case, on specific points and body areas

fluid acts with a certain force and time interval. This ratio can usually be adjusted depending on the sensations of the body.

The function of hydromassage allows you to break down fat, and therefore, it is quite an effective way to lose weight. In combination with properly selected physical activities and special nutrition, a significant weight loss is noted. If shower cabins with a bath and hydromassage are purchased, the effect increases to a great extent.

This procedure provides an opportunity not only to lose weight, but also to improve the structure of skin tissues, since during the period the supply of nutrients and oxygen is enhanced. In this case, the muscle tone increases markedly, and the protective forces increase significantly.

Turkish sauna

With such a function, a cloud of steam enters from a special nozzle, thanks to which deep skin cleansing is carried out. If desired, you can add aromatic essences that have a relaxing effect. Such tools are introduced into a retractable or removable diffuser.

Therapy with the help of steam has proved its viability, because with sweating, the circulation of lymph and blood improves. However, this procedure should be agreed with the doctor, as in some diseases the steam bath is contraindicated.

Rain shower

An equally useful feature is the imitation of tropical rain, in which liquid comes from a shower disk or a special grating. Water enters the nozzle from the central part. When turned on, it feels like it is raining inside the cabin.

Other functionality

The capabilities of shower products are not limited to the above functions. Each model may have an additional set: a special light, built-in radio or player, fan and some other devices. With their help, you can make the operating conditions as comfortable as possible.

Installation process

Works on the installation of shower boxes can be done by hand if you become familiar with the basic principles.

Below is a special instruction that allows you to self-assemble structures and connect to the water supply.

1. Installation begins with the assembly of the pallet. These tanks have special legs that must be adjusted using the building level. After leveling, the nuts simply twist.
2. Directly to the pallet is attached pipe siphon. It is connected to the drain pipe leading to the sewer system. When connecting, you must carefully seal the joints.
3. After that, side walls are installed.. Silicone sealing contour is surely inserted into the grooves. As fasteners are usually used special brackets supplied with the product.
4. When the sides are fully installed, the main cover is installed on top.. Flexible hoses are connected to the watering can, through which water will be supplied.
5. Next, sliding doors are installed, for which they are fixed silicone rollers for showers. When the behavior of the work can not allow distortions, otherwise the sash simply will not close.
6. Since many models are equipped with different electronics, electricity must be connected.. A special transducer is assembled so that the instruments can function properly.
7. At the final stage, testing is carried out.. The shower is turned on for a certain time, after which the tightness of the connections is checked. If there are leaks, then they need to be repaired.

Attention! The process of assembly and installation may differ slightly depending on the type of model and additional features. However, the above stages of work will have to carry out in any case.

As a conclusion

Familiarization with the presented materials allows us to understand what are the showers with a steam generator and hydromassage, as well as a set of other useful functions. Although their installation is considered to be a rather complicated matter, it can be carried out without the involvement of professionals. More detailed information related to this topic is reflected in the video in this article.