Sink and sink: recommendations for the selection of designs

09-04-2018

Sewage

Sinks from stainless steel, as well as faience, glass and stone products are almost an essential attribute of any kitchen. At the same time their range is so extensive that many owners have some difficulty in choosing.

To facilitate the process of selecting the sink for the kitchen or bathroom, we will try to analyze the main parameters of household sinks.

The choice of such structures is huge, so it is worth deciding in advance exactly what we need

General requirements

One of the first questions asked in plumbing stores, it sounds like this - how does a sink differ from a sink?

In fact, everything is quite simple: washing is a narrower concept, and is a sink that is used for washing dishes. That is why sinks are installed either in the kitchen or in the production areas.

Note! Simply put, every sink is a sink, but not every sink can be called a sink.

Among the main requirements that are put forward to this element of the interior, are the following:

First of all, the size of the product must comply with the tasks. For example, in a bathroom with a bathtub, a compact model is quite sufficient for washing, while for a kitchen in a house where a large family lives, the size should be increased.

Chemical resistance of the material comes out on top

Secondly, the surface of the sink for washing and washing should be resistant to various influences, ranging from friction and ending with oxidation upon contact with detergents. From this point of view, tempered glass constructions are preferable - it is rather strong and chemically inert.
Thirdly, The material should not change its characteristics during prolonged contact with water. That is why even the cheapest stainless steel sink for the kitchen in the production of processed anti-corrosion composition. If this is not done, the appearance of rust is almost guaranteed.

Tip! This does not mean that we should neglect the regular cleaning of such structures. On the contrary, the more often we will carry out preventive treatment, the longer the product will last.

Analysis of available options

Product form

Instructions for the selection of such structures is quite simple.

We need to decide on three parameters:

By size.
Configuration.
By the material.

As for the size, everything is quite simple here: the dimensions are usually determined by the space available.

But in relation to the form it is worth looking at the assortment more closely:

For the bathroom, it is best to choose the traditional semi-circular or oval models.. Their shape devoid of corners provides the most comfortable use of the shell, moreover, water drops in such a bowl do not stagnate.

Note! If you plan to use the sink for washing small items (for example, in the absence of a bath), then you need to choose a design with the deepest bowl.

Kitchen sinks are usually made rectangular or round, with a flat bottom, on which it is convenient to put dirty dishes. Here, the choice is determined by your personal preferences, but do not take too deep a model, if your height is less than 170 cm: you have to reach for the bottom and you will get more tired.
A two-bowl sink will also be a good buy.. Such designs allow you to perform the primary sorting of dishes or products that require processing, so you will spend much less effort.

Tip! When buying a sink for the kitchen, do not forget about the side dryer: the metal surface located on the side will be very convenient to use.

Body material

Plastic sink - 50 x 41 sink - an example of a budget solution

If we talk about the material, then its choice is largely due not only to the functional, but also to the price. To compare different products, it is worth analyzing the table below:

Material	Special features
Stainless steel	The traditional solution for budget kitchen interiors. Products are of sufficient strength, but they are prone to corrosion, especially in places of mechanical damage. Relatively easy to wash. The main advantage is a reasonable price, as well as the possibility of installation by hand.
Faience and porcelain	Usually used for sinks in bathrooms and bathrooms, in the kitchen are installed extremely rarely. The material is well tolerated by the effects of detergents, but is afraid of shocks: chips are often formed on the surface. Earthenware products can be purchased for relatively little money, but porcelain is almost completely included in the premium segment.
Fake diamond	Products are made from a composite based on liquid acrylic with the addition of pigments and mineral fillers. The material is very durable and stable, so that the service life of the wash can be 25 years or more. The main disadvantages of washing stone for the kitchen are a significant amount (a reliable worktop is required), as well as a rather high cost.
Strained glass	Glass models appeared on the market relatively recently. They are made from cast glass subjected to high-temperature processing: the material is not afraid of heating, does not become cloudy with time, and tolerates friction well. And still it is necessary to use glass sinks in the kitchen in a sparing mode: it is better to wash large volumes of dirty dishes in the dishwasher.

In addition to these options, you can find others. For example, it will look very good natural stone - washing of marble or granite can become a real decoration of the interior. Cups made of copper or bronze also serve well, but they are more appropriate in rooms designed in a certain style.

Conclusion

If you need a sink - a sink in the kitchen or bathroom, do not limit yourself to traditional options. After spending some time analyzing the available assortment, you will definitely find a model that will suit you both in price and in functionality and in appearance (see also the article Sink 60 by 60 cm: features of the choice of this size).

In more detail about the device and the choice of similar products it is told on video in this article.