Sink for kitchen from stainless steel: useful information

10-09-2018
Sewage

In the premises for cooking, designs for washing food, dishes and some other activities play an important role. They should be as user-friendly as possible, easy to install and aesthetically appealing. This set of qualities just has a kitchen sink made of stainless steel.

The photo shows stainless steel products.

Detailed consideration of the benefits

Products made of alloyed alloys are resistant to corrosive manifestations, which is associated with a high chromium content. If the amount of this substance exceeds 17 percent, then the material is able to feel comfortable even in the most aggressive conditions. Protection from external influences provides a film of insoluble oxides formed on the surface.

Further, it is proposed to focus on the positive qualities that stainless steel kitchen products possess.

  • The most attractive advantage is the price, which allows you to purchase products to a wide range of consumers.
  • An extensive set of aesthetic characteristics makes it possible to successfully implement designs in modern interiors.
  • Installation can be done by hand, thereby eliminating the need to attract professionals.
  • Contaminants and harmful microorganisms are easily removed from the smooth surface of the devices, which helps to maintain cleanliness.
A model with an extra small cup is shown.

Addition! A huge number of design solutions allows you to buy a model that is suitable not only for technical but also for aesthetic parameters. The shape of the bowl and additional elements can vary greatly.

Basic installation methods

Stainless steel products, as well as products from many other materials, can be installed using various technologies. Each option is relevant in a particular situation, because the aesthetic perception of the device depends on it. When choosing an installation method, attention should be paid to the operating conditions.

Countertop Insertion

This installation method is the most popular, as with relatively simple installation, you can achieve an impressive decorative effect. After installation, stainless steel kitchen sinks look very organic.

The process proceeds in the following order.

Reflects the process of marking and cutting holes.
  1. The first step is to mark the surface with a cardboard template that comes with the package. At least 50 mm should be retreated from the front and at least 25 mm from the rear. During the work, a tape measure, ruler and pencil are used.
  2. After all the lines are marked, a cut is made under the bowl. First, a hole is drilled through with a drill so that the electric jigsaw blade can penetrate inside. After removing the unnecessary part of the tabletop, the ends should be treated with sandpaper.
  3. At the last stage, the sink is placed directly in the opening.. If it fits perfectly to the surface from all sides, then it is fixed with pre-sealing. That is, a silicone compound is first applied under the edges of the metal product.
It looks like a mortise model after installation.

Note! When installed mortise corner kitchen sinks made of stainless steel, it is necessary to pay special attention to the accuracy of the location, because even a slight offset can disrupt aesthetics.

Pedestal

The simplest option is to install the product, which is a metal cover for a cabinet without a top. When the sink is installed on the cabinet, its edges close the ends of the side walls. Assembling is much easier than in the previous case.

Surface-mounted products are fixed using special fasteners, which are usually supplied with the kit. However, if necessary, they can be purchased at any plumbing store. Every detail is a small plate with a slanting slit on one side.

First, screws are screwed into the cabinet walls, after which these fasteners are placed on them. The corner part of the installation should be directed toward the sub-table. After the installation process of the sink, the locking part is tightly attracted to the cabinet frame.

Products in the form of cover plate for the locker.

As an additional fastener, it is recommended to use small bars, which should be screwed on the reverse side. In this case, the reliability of the design is significantly increased.

Usually, the work is completed by connecting the siphon to the sewage system and connecting pipes for the water supply to the mixer.

Integration into the design

In this case, the embedding is made directly into the tabletop, with no side walls. Most often, such products are fixed from the bottom side so that the end face is visible. However, this is possible if the bollard cover is made using stone materials.

An example of an integrated car wash.

In this embodiment, the accuracy of the cut is of particular importance, since the extreme part will not be hidden. Therefore, at home the integration of sinks is quite rare. In the absence of a certain experience, it is better to abandon this method of installation by selecting one of the above options.

Possible location

Most often there are models designed to be placed on one wall. With this arrangement it is possible to install products of almost any size. For washing, you can choose the most suitable place from the point of view of the owner.

Special attention deserve angular counterparts, allowing you to use even the space at the junction of the two walls. Such models are best suited for rooms that are not large. Placing the sink in the corner allows you to make the kitchen ergonomic.

Demonstrated model of the angular type.

In terms of design solutions and additional features, there are no particular differences between the two types of products. Corner models can have any shape and a certain number of bowls, and the containers can be placed in a completely different way than in the case of ordinary products.

The most popular corner model with two 4040 mm bowls, located on both sides. Behind them is a zone for drying dishes.

As a conclusion

Detailed familiarization with the above information will allow you to perfectly navigate the range of kitchen sinks made of very practical material - stainless steel. If you consider the method of installation and the location of the structure in the room, then you can achieve a positive result when choosing.

To make this manual as useful as possible, it is advisable to view the video in this article.