Small sink: design features and varieties
When the interior of such a room is designed as a kitchen, modern designers are faced with the problem of finding additional space where they can install new appliances and various additional cooking appliances. It should be noted that there is not enough space not only in small areas in apartment buildings, but even in individual projects created with the wishes of future users taken into account. That is why a small sink is an original solution in the selection of sanitary equipment for the kitchen.

Advantages and disadvantages
To begin with, in order to understand whether it is worth buying and installing such equipment, it is necessary to study it in detail, comparing all the positive and negative qualities. At the same time it is necessary to do it, even if a spacious room is used. The fact is that such designs are great even for large kitchens.

Merits
- First of all, a small kitchen sink should save space.. Small systems can be placed in a wide variety of places in the room, using even niches or furniture. However, it must be remembered that the necessary communications and proper connection should also be made.

- Special attention should be paid to the fact that such products are developed with special care and therefore it is quite convenient to work with them, even when washing large-sized dishes. Typically, these sinks are deeper, which almost completely eliminates water splashing, but this should be taken into account during installation, so as not to complicate use.
- Another advantage of such products is their low cost.. However, such a comparison should be made only among structures made of the same material and a certain thickness.
Tip! It is worth remembering that these types of sinks usually have a rather specific shape. Therefore, to install them you need to use special locks or pedestals.

disadvantages
- First you need to note the fact that a small kitchen sink significantly reduces the space for working with water. At the same time, large dishes without the habit of washing are rather inconvenient. However, if you consider the vacated space that can be used to create a cutting area or install a dishwasher, then this is fully justified.

- For such structures it is worth using special mixers, which are designed specifically for their dimensions. You also need to take into account the fact that some models of such sinks need certain systems for water supply, which were developed for them.
- Currently, these products are not very popular, which greatly affects the field of production. Therefore, the choice of such models is very limited, even among the most famous manufacturers. However, with the right approach, you can always purchase a product that is ideal for the specified specifications and fits perfectly into the interior.
Tip! It is best to acquire similar structures in parallel with kitchen furniture. This will help find the perfect combination and location of all the elements.

Types and features
It should be noted that the price of such products is quite diverse. However, it very often depends on a particular model and some of its characteristics. This also needs to be considered when choosing a specific type of washing.

Species
Usually a small corner kitchen with a right-hand corner of the sink implies a square sink design. It is believed that this form is more convenient and looks great in the interior. However, round products are also very well proven in their work and at the same time they free up additional space.

Special attention should be paid to the moment of fixation of the structure. The fact is that there are overhead and mortise systems, which are fundamentally different in their mounting characteristics. The choice of a specific model for this parameter is carried out, focusing on the furniture, which will serve as a frame for installation, although some manufacturers offer ready-made pedestals for both types of products.

It should be noted that small sinks for kitchen 40 cm or with similar dimensions have original seats for the installation of faucets. In this case, there are models that involve the installation of a crane either on the wall or on the working panel of the tabletop. Therefore, they have no holes, except for the drain.

It is also necessary to say about additional fittings in the form of a drain siphon. The fact is that almost all such sinks are designed to save space, which means that this element must meet these requirements when used. Considering this, most manufacturers complete their products with similar products of their own making.
Tip! Some models of such systems are sold in combination with a tap and drain siphon. This is sometimes strongly reflected in the cost of production, but the result obtained and the compliance of all elements fully justifies such costs.

Recommendations of specialists
- Usually installation instructions are attached to such products. However, in most cases, you have to show your own imagination and ingenuity in order to maximize the benefits of such products. That is why the installation should be trusted by professionals, especially if it is intended to be installed with integration into furniture.

- Structures of this type are almost always supplied with protective elements in the form of a film. They should be removed only after full installation in order not to damage the product in the process.
- When a special lid is attached to a structure, its principle of closing should be recognized even before purchase, since it may not correspond to the design of the installation site. It is also worth paying attention to the density of its compression and material manufacturing.
- If the installation is done by hand, it is very important to understand the principle of fixing the sink on the surface and to perform it without any play or gaps. Some experts at the same time recommend the use of sealant, but so that it does not spoil the appearance of the finished structure.

Conclusion
After reading the video in this article, you can get more detailed information about similar products and its types. Also based on the text proposed above, it is worthwhile to conclude that such products have a lot of advantages that, with the right approach, almost completely cover all the disadvantages, and the saved space can always be used to accommodate additional equipment or create work areas.