Stone sinks - the main varieties, especially the

Nowadays, the choice of options for various kitchen equipment is so great that sometimes it is difficult to determine what is best for you. And if before the focus was on convenience and functionality, now such criteria as attractive appearance and original design come to the fore. Stone sinks for the kitchen are the option that meets all the requirements, and this is due to their popularity.

The main features of the considered product group

Consider the pros and cons of stone sink for the kitchen, so that you understand this topic as best you can:

Note! It is worth noting such a factor as maintainability of products, scratches on surfaces made from natural materials can be simply sanded, and cracks on composite structures can be sealed with a special compound.

When considering the comparison of which sink is better - a stainless steel or an artificial stone (it makes no sense to compare natural materials, since this option belongs to a completely different category), we can single out the following factors:

• The weight of stone sinks is much higher, but their sound insulation properties are much better, and when using a mixer, the noise level will be minimal.
• The price of stainless steel is lower, but the appearance is much inferior to structures made using stone.
• It is not recommended to wash sinks made of artificial stone with the use of abrasive compounds, also you should not use wire sponges - they will create small scratches on the surface, into which dirt will get clogged.

Recommendations for installation and care

If you have firmly decided to purchase the product of the group in question, you should know how to install a stone sink in the countertop and what measures should be carried out during operation, since the reliability of the system and its external attractiveness largely depend on this.

Installation

This stage has many features that you should definitely study before starting work:

• Of great importance is the type of sink and its installation option, there are overhead and built-in options. Overhead shells are simply placed in the hole of the table top and fixed there, while the mortise attachments are attached from below, which makes it much more difficult to put them with your own hands, because you need to very carefully seal the joint and make it almost imperceptible, which is very difficult.

• You should also stock up with the necessary tools, if cutting of the table top is required, then you need either a jigsaw or a stone cutting unit (if the tabletop is stone), in the second case, it is better to entrust the specialists, as they are very complex, and a lot of dust is formed during the cutting process.
• From materials you will need sealing materials (tape or sealant), as well as fasteners to fix the structure. And of course, do not forget about the mixer and siphon, because without them you can hardly use the sink.
• Sometimes when installing an additional tap for drinking water, the question arises as to how to drill a stone sink.? For this purpose, special drills are used, which will allow to perform the work quickly and efficiently, the usual options for metal or concrete can hardly cope with the work.

• Then, if necessary, a hole is cut in the tabletop; to do this, the sink contour is drawn on its back side, with particular attention given to its correct location, since then it will not be possible to redo the work. Cutting is done neatly around the perimeter with a slight indent from the outer line (depending on the configuration of your sink).

Tip! Many of those who do not have the experience of cutting holes do not understand how to get started. Everything is very simple: you drill a hole in the worktop of such a diameter that the electric jigsaw fit into it, after which cutting is done very simply and quickly.

• Next, the place of contiguity of the sink and the contour of the hole in the table top are processed with a sealing compound or glued over with a special sealing tape.. This will provide a tighter junction and prevent moisture from entering under the edges of the structure.
• Regardless of whether the stone washer or stainless steel will be installed, after placing the structure in the tabletop, it must be fixed with special fixing screws, this should be done carefully so as not to damage the surface.
• Finally, a siphon and a mixer are installed, how to do this work, will be prompted by the instruction, which necessarily comes with each of the products.

Care

In order to keep the design attractive after installation, you should know how to clean the stone sink and what tools to use:

• It is worth noting that it is necessary to wipe the surface daily, then it will always be clean, and you will not have a problem than to wash the stone sink from the plaque that has accumulated due to the fact that the surface has not been cleaned for a long time.
• Any sponge (only non-metallic, as it may leave small scratches in which dirt will accumulate) and a universal detergent will work. And before you clean the stone sink, it is better to apply the tool and leave for half an hour. It is not recommended to use acids and compounds with a high content of chlorine, they can cause stains on the surface.

As you can see, the recommendations for care are simple, and to comply with them is not difficult, it is important not to allow the formation of persistent plaque, but to remove it periodically, while it has not yet eaten into the surface.

Conclusion

Products from a natural and artificial stone - the excellent decision practically for any kitchen. And if you have any questions, watch the video in this article - it clearly shows and tells you some important nuances.