Toilet with a high cistern: design and specifications
Retro toilet with a high cistern is a great solution for those owners who want to arrange an apartment in a classic or English style. At the same time, the installation of such an original model today is practically no different from the installation of the usual compact version. But let's talk about everything in more detail.

General provisions
As the saying goes: “everything new is well forgotten old”. So in this case, toilets with outboard drainage systems that were considered obsolete until recently are again gaining popularity, moving conventional designs with tanks in the bowl on a specialized market. Let's see why this happens.
Benefits of a high tank
- Unusual attractive appearance in perfect harmony with various types of design. In the manufacture of current models, modern materials and technologies are used, which allows them to differ dramatically for the better from those structures that could be found in old houses of the Soviet period. You can also choose the coating of the connecting pipe, which makes its mark in the aesthetics of the interior:
Pipe coating | Matching design |
Bronze or gilding | Retro, classic, english style |
Chromium | Hi-tech, minimalism |

- Intensive drain. Due to the additional elevation of the reservoir, the pressure in the pipe and, accordingly, the flow rate are enhanced.
Tip: It is recommended to use this technology in buildings with a weak water supply from the water supply system, since the described features of the device successfully compensate for this trouble.
- The possibility of adjusting the height of the connecting pipe. At first glance, this advantage does not seem so obvious, but it provides three additional possibilities at once:
- If necessary, further increase the intensity of the drain by raising to a greater height of the drain tank.
- Adjust the design to the preferred version of the trigger. You can use the classic chain, and you can drop the tank to the level where the button will be convenient to use.

- Remove the tank with liquid as high as possible to save space.
Tip: if in your apartment the toilet has a very limited space, then it is recommended to stop at choosing a narrow cistern, which, taking into account its elevation, will occupy a minimum of useful space.

- No additional pressure on the bowl. In the case of installing the tank directly on the toilet, it constantly has a mechanical effect on its edge, which may eventually lead to an emergency. With the suspended version, there is no load at all, which makes it possible to use faience or plastic vessels that are simpler without a reinforced shelf.

- Practical and easy do-it-yourself repair work. For example, the most frequent failures may concern the efficiency of the drain, while restoring or replacing it separately from the rest is much easier than if they were one whole with the bowl.

disadvantages
It is fair to note some negative aspects of the purchase of a toilet with a high tank:
- Higher price. This is an additional element - a connecting pipe, which increases the total cost of the whole structure. But here, on the other hand, there is a sufficiently wide scope for maneuvers due to the choice of different lengths of the given part.

- Increased dimensions. Although at the expense of raising the drain system, you can also gain useful space, but it should be borne in mind that the total space occupied will still be somewhat larger than that of the less cumbersome paired model.

Selection features
The following instructions will help you navigate when choosing the most suitable model:
Material

The first thing you should pay attention to the material of manufacture:
Material name | pros | Minuses |
Porcelain |
|
|
Faience |
|
|
Plastic |
|
|
Flush type

Two options are possible:
Title | Description |
Vertical | The flow of water passes through the rear wall only on the basis of the connecting pipe. As a result, it is necessary to wash the rest of the vessel with special detergents so that sanitation is observed. |
Circular | The liquid is evenly supplied from several holes located around the circumference of the bowl, and twists, carefully washing all the walls. This ensures complete hygiene of the structure. The only additional requirement is the need for a completely flat floor surface. |
Tip: It is recommended to choose a model with a double drain system, in which one start lever activates a full discharge of water, and the second - only half. This will make the operation of the toilet more economical.
View bowl

The most important criterion when choosing a vessel is your personal preference, but some nuances still need to be considered:
- The simpler the design, the easier its maintenance. Figured angular models will accumulate difficult to clean out the dirt on all bends, grooves and patterns.
- The interior can be funnel-shaped, with a shelf or slope. The smallest amount of sprays and the greatest efficiency of flushing while using the device in the first variant. The presence of shelves, on the contrary, causes a lot of inconvenience. You should also pay attention to the labeling, which may indicate the presence of an anti-splash toilet system, which, due to the geometric features of the bowl structure, completely eliminates the possibility of splashing out water.
- If you are willing to spend additional funds, you can purchase a toilet with additional functions for seat heating, lighting, dirt repellent coating, or even a mechanized lid closer.
Conclusion
Toilets with a high cistern not only make it possible to realize unique design solutions due to their appearance, but also have some technical advantages over the more familiar models with a combined drain. We also set forth the main selection criteria, which should be paid attention to when making a purchase of the mentioned sanitary equipment.

On the presented video in this article you can read more information that is directly related to the given materials. Do not be afraid to experiment in the design of their own homes.