Washing over a washing machine in the bathroom and in the

A large bathroom or kitchen in many apartment buildings of old construction today remains a pipe dream. Therefore, there are several ways to achieve increased functionality without reducing the main area. One of the options is to install a sink over a washing machine, specially designed for such a case, or to install it under a sink. In the article we will deal with her choice, as well as with the selection of a washing unit for her.

Find out in the end whether it is convenient, or not even consider such a method. Let's start with the bathroom and continue the kitchen.

The main properties of the sink

In order not to beat around the bush, let's deal with the positive and negative possibilities of our bathroom sink:

Tip: carefully select the dimensions when buying equipment so that they are fully consistent with each other. The washing machine should be front-loaded. Pay attention to the shell passport, in which there is a point where the models of the units for which they are suitable are indicated.

Choosing a sink

The instruction in this case is simple and actually reduces to the size of the devices.

You should also pay attention to plums.

1. The first rule - the sink should be shallow, with this parameter in each case is selected individually. Otherwise:

• a very deep washbasin will just take up all the free space, and the car just won't fit;
• It is very inconvenient to use an unnecessarily flat design, since the splashes will practically not linger, and fall on the electric appliance, and this is very undesirable.

1. The overall dimensions of the device also can not be overlooked. Remember, the sink should not only close the washing machine, but also hang over it around the perimeter of 20 mm on each side.
2. The drain system in this sink should be special, unlike the usual one, but performing the same function.

Tip: never place the drain pipe above the washing machine, it can be very dangerous.

In sinks of the “water lily” type, the plums are taken out of the apparatus. At the same time, there are two variants of such structures - horizontal and vertical, the latter is less clogged and able to provide faster flow, unlike the first, which needs frequent prevention.

However, horizontal drainage is the safest.

1. The drain-overflow system is a supplement that is better for washing. In this case, it will be possible to avoid possible trouble, if there is an overflow of the sink. After all, but an electric device is installed under the product.
2. Hole for mixer optional. It can be embedded directly above the sink.
3. Shell material can be the most diverse, however, plastic and faience models are most often used.

We select the washing machine

The set - a sink and a washing machine should be harmonious, only then it will be possible to install it correctly in the chosen place. Product height is one of the most important parameters. From this depends on the comfort of the washbasin.

When selecting, you should add the height of the sink and 100-150 mm to the distance between the products to the height of the washing machine. Then you will know for sure - at what level the floor will be washed from the floor. We recommend 800 mm or more, this parameter is considered universal.

Tip: if the distance is much larger, but you do not want to change the model of the sink and washing machine, install a footrest under the sink.

There are also special models of washing units that are designed specifically for installation under the sink. Usually they are offered for sale with the cup.

This solution can be called ideal, it should be remembered that the aggregates of small sizes are designed for washing clothes at the rate of 3-3.5 kg. When this is not enough, pay attention to more roomy models. But, please note, it is better to choose narrow options.

Washing machine in the kitchen

As you have not tried, but to install the unit in the bathroom does not work for various reasons. Why not use the place under the sink in the kitchen for this? We all know that the dresser with a mortise or false sink is empty, so we offer to fill it.

It is advisable to be aware of this before the table top is installed. In this case, it will be easier to choose the desired height of the washing device. Unlike a bathroom, it is not necessary to place it just under the sink, it is better to move it to the side, then you will definitely have problems with the installation.

You can develop a built-in design, when the cabinet will have doors, closing which you hide the machine from the eyes. But, more often, they are limited only by the retracting of the washing unit under the countertop. In this case, you need to choose a machine with front loading, you can, of course, with a vertical one, but this will add additional problems with the arrangement of the upper part of the table.

This installation method does not require special siphons for the kitchen sink or any other special tools. Everything is quite simple and prosaic, however, by donating one pedestal with drawers in the kitchen, you can increase the area of ​​the already small bathroom.

Connecting a washing machine is not difficult. It can easily be made independently, with accuracy following the instructions stated by the manufacturer.

Conclusion

If you live in an apartment where there is a small-sized bathroom and it’s impossible to increase its area in any way, you can expand its functionality with a sink set with a washing machine, where the first one will be placed above the second one.

Otherwise, the latter can simply be taken out into the kitchen and placed under the table top for washing. The video in this article will provide an opportunity to find additional information on the above topic.