What to do if the sewage system is clogged: 4 ways to solve

Residents of private houses, and city apartments more than once encountered clogged sewers. The reason for this may be a mere trifle, but the inconvenience this problem delivers a lot. Therefore, the question of how to clean - if the sewage system is clogged, remains relevant until now.

Why is sewage clogged?

Before you start solving a problem, you need to find out why it arose, and the procedure will depend on it.

Most often, the sewer pipeline is clogged for the following reasons:

• if the pipes are metal, then they could simply rust or deposits on their walls during the years of operation, narrowed the diameter of the pipeline and simply do not have enough capacity;

• foreign objects of both organic and inorganic nature could get into the sewage system;
• when laying the pipeline, mistakes could be made, for example, too many turns at a large angle or insufficient inclination of the pipes;

No need to rush around the house and think about what to do: if the sewer pipe is blocked, in most cases the problem can be solved by yourself. Although, if mistakes were made in the design of sewage or pipes just outlived their own, then the scope of work will be significant.

Fix the problem

There are many ways to solve the problem of clogged sewers.

Most often, this problem is fought in the following ways:

• using various liquids. At the same time, one should try to soften or even partially dissolve the cork formed in the pipe;
• if there is confidence that the blockage occurred in the siphon, then it can be simply disassembled and cleaned manually;

• in case of miscalculations in the design or violation of the technology of laying pipes into a ditch, you will either have to regularly clean the sewage system, or open problem areas and eliminate the defects;
• Do not overlook the popular methods of combating sewer blockages with the use of available tools. In an emergency, this can be a real salvation, and the cost of solving the problem will be minimal.

Using liquids - method 1

We must immediately say that this approach is effective only if the cork formed in the pipe is not very powerful. The choice of the type of fluid depends on what caused the sewage to be clogged.

So, if the cause was frozen fat (a fairly common problem in kitchens), then you can solve the problem even with ordinary boiling water. The entire instruction is reduced to pouring 1-2 liters of hot water into the pipe, the cork just melts.

For the same purpose, commercially available alkaline liquids can be used. They also effectively affect the fat and quickly remove the congestion.

If the pipe is clogged including solid household waste, you can try the acid. It partially dissolves solid inclusions, and the plug quickly resolves.

Note! Alkali and acid should not be used together, as a result of the neutralization reaction, the effectiveness of liquids will become zero.

Mechanical method of cleaning sewage - method 2

What to do if the sewage system is clogged, and purchased liquids were powerless? In this case, you need to arm yourself with a plunger and try to solve the problem with the help of physical strength.

Work with the plunger should be as follows:

• fill the plumbing fixture with water;
• put a rubber cup to the hole and try to push the water into the pipe, it is likely that the cork will break.

Note! For greater efficiency, you can combine the use of a plunger and fluids. Sometimes these methods do not work one by one, but together they give a good result.

Plumbing cable - a more serious device for cleaning, and the mechanical impact will have directly on the mash. This tool looks like a thin flexible cable that needs to be gently inserted into the pipeline until you feel a slight resistance.

Note! The end of the cable can rest against the joint of the pipeline, in order not to damage the pipes, it is necessary to “pass back” a little and try again to move the cable forward. If resistance remains, then, most likely, the cable has rested against a jam.

Reciprocating movements need to break the cork. When the resistance begins to weaken, success must be fixed with boiling water or purchased liquids.

The advantages of this method of cleaning can be attributed to the fact that the cable is flexible, which means that without any problems it will reach to any jam. Even with remote clogging, all the work can be done by hand.

Popular methods of combating clogging of sewage - method 3

Of the many non-traditional ways of dealing with blockages can be identified several of the most effective:

• using a conventional pump;
• using a hose;
• the creation of pressure in the sewer.

With a conventional pump, air is forced into the pipeline. By the principle of operation, it is an almost complete analogue of work with a plunger with the difference that the possible pressure is limited by the pump capacity and the strength of the pipeline.

Too zealous is not necessary, after creating an overpressure, if the cork does not collapse immediately, you need to sharply open the pipe so that the pressure levels off. After that, repeat the process, due to such a swing, sooner or later the pipe will be cleaned.

The hose is used instead of sanitary cable. The advantage of the hose in this case is that through it you can apply a jet of water under pressure. Thanks to this, the cork in the pipe will simply blur, and the problem will disappear.

Pressure in the sewage system can be increased in another original way; for this, several people will have to be involved. Caps are inserted into all sanitary devices and water is collected. Then synchronously the plugs open and the sewer pipeline is flushed. It is fair to say that the effectiveness of this method is low.

Calling specialists - 4 way

This is, first of all, the question of cost. If the family budget can withstand unplanned expenses without any problems, then, of course, the challenge of specialists is the best option. In this case, do not have to spend money on special liquids and equipment.

As for where to call if the sewage system is clogged, then you can contact either the local emergency service, or any private organization that is engaged in ascenisation activities. Private offices are even preferable because they work around the clock.

Summarizing

To the question what to do: if the sewage system in a private house clogged up, each person chooses his own answer. Some, without hesitating a second, call the appropriate services, others do not even consider this option and do everything on their own. In any case, the advice given in this article will allow you to solve the problem with a high degree of probability without the help of specialists.

The video in this article shows the techniques used to clean the sewer.