Whether the mole is effective for sewage: analysis of the

About such a tool for cleaning sewage as Mole probably heard everything. But how effective is it, because you can stumble upon the most controversial opinions on the net? In this article we will try to answer this question, and we will take a closer look at what the Mole sewer pipe cleaning tool is and in what cases it is effective.

Composition

To understand what processes in clogged sewer pipes causes a mole, you should familiarize yourself with its composition. First of all, I must say that this tool is sold both in the form of granules and in liquid form. However, both in the first and in the second case, its composition contains one active substance - NaOH, i.e. sodium hydroxide.

This substance is the basis of many detergents, as well as bleach and other household chemicals. NaOH acts differently on different types of pollutants:

Tip! Before using the Mole it is necessary to find out for which kinds of pipes it is intended. Some types of this tool is prohibited to pour into plastic pipes for domestic sewage. This information is contained on the packaging.

From this we can conclude that there are no universal means for cleaning the sewage system.

Mole Efficiency

So, we considered which active substance contains a mole for cleaning sewage and what properties it has. But what is the situation in practice? The result, of course, depends on the type of clogging of the sewer system.

Deposits

If the cause of clogging is lime and rust, the substance will really begin to slowly dissolve the plug. However, it will take many days or even weeks to completely remove sediment. Therefore, mechanical effects in this case are much more effective.

It must be said that for successful cleaning with Mole pipes it is necessary to ensure the following conditions:

• In the process of cleaning the sewer, it can not be used for its intended purpose. The fact is that the first portion of water will remove the alkali, as a result of which the whole process will stop.
• The soda solution should not be allowed to flow out of the pipe. If you do not disassemble the system, then it is impossible to fulfill this condition. It should be borne in mind that the process of dismantling old pipes may be irreversible.

Tip! For effective pipe cleaning it is better to use the combined method, i.e. chemical combined with mechanical. If you first pour Mole into the pipe, a sewer cleaning machine can successfully complete the cleaning process that has begun.

Sand

As mentioned above, soda is not able to affect persistent mineral deposits. Accordingly, if sand has accumulated in the pipe, then the tool is completely powerless in this case.

Note! Sand blockages and other suspensions occur in sewers, where there are areas with insufficient slope.

Organics

Fat plugs dissolve the substance perfectly, however, if the cork still contains threads, wool or hair, then the process of dissolving it will take quite a long time. The result depends largely on how long the agent will be in contact with the pollutant.

In practice, the cleaning process is as follows:

• The pipe cleaner first fills the siphon under the sink or bath, and then goes into the pipe;
• Further, the substance spreads to the place of clogging and reacts with fat and organic matter, decomposing them into simple compounds.
• After a small hole is formed in the cork, the Mole flows out into the riser, as a result of which its action is completed.

Thus, the tool for a long time is in contact only with the contents of the siphon, however, it is already not difficult to disassemble and clean it with your own hands. Time for this procedure will need significantly less than the dissolution of garbage.

Thus, if you need high-quality cleaning sewage - a mole is not the best option. However, if for some reason it is not possible to call a plumber, for example, on a day off, and there is no cable on hand, Mole can temporarily fix the problem.

Tip! Instead of Mole, you can use caustic soda, the price of which is much lower. The result will be no worse.

Sewage Cleaning Technology Mole

Instructions for use of the tool is extremely simple:

• First of all it is necessary to scoop out water from the sink or bath.
• Then in the drain hole you need to pour or fill the tool. After that, the sewer should be left in this form for several hours.
• After the specified time has elapsed, it is necessary to take some water into the bathroom or sink and make a few strokes a plunger. As a result of this operation, the water should go through the drain hole with a funnel.
• If the operation has not yielded results, it should be repeated again.

Note! When working with a substance, it is necessary to observe safety measures - wear gloves on your hands and avoid contact with eyes. After using a liquid product, close the lid tightly.

As already mentioned above, this cleaning briefly fixes the problem. Therefore, sooner or later, you still have to resort to the mechanical method.

Conclusion

Sewage cleaning by Mole has the right to exist - in some cases the tool really helps a lot. However, it should not be considered as a full-fledged alternative to mechanical cleaning. From the video in this article, you can get more information on this topic.