Cleaning of ventilation from various pollution using
In the modern world, people spend a lot of time in rooms where air exchange is carried out through a special communication system. In order for it to function properly, it is necessary to perform its regular maintenance. It is mandatory to clean the ventilation of grease, dust and other contaminants.
On the effectiveness of the event
The process of removing deposits from ducts can significantly improve the performance of the system, since a layer of dirt can reduce the throughput of the ventilation pipes.
Elements of ventilation are usually exposed to strong dust exposure, and the hood often suffers from fatty deposits, which are formed when air is emitted from the kitchen.
- With constant maintenance of the system, it is possible to maintain an acceptable microclimate in the home throughout the year.
- If regular cleaning of the ventilation ducts is carried out, the service life of the communication network can be significantly increased.
- Removal of various deposits from the internal surface of pipelines allows you to get rid of pathogenic microbes.
Attention! The pollution level of the system in the conditions of the modern world is determined using special video equipment, on the screen of which a high-quality picture is displayed.
About the work
In order to save pollution removal measures, you can do it yourself, especially if you have the right tools and special equipment for cleaning the ventilation.
Systems with natural air circulation are much easier to maintain, since they do not have sophisticated instruments. As for the forced networks, there may be some difficulties in the cleaning process.
Standard toolbox
- Flexible shaft is an indispensable tool for removing contaminants in communication systems. A brush is attached to one of the edges, with which it is cleaned. A drill acts as a driver for the tool.
- The piercer is used only in those cases if inside the pipelines there are any blockages or foreign objects.. Usually two square and circular loads are delivered with it.
- A set of brushes is used in conjunction with a flexible shaft.. Usually in the set there are about 10 items with different sections. Fixing elements is carried out using threaded connections.
- The hook is a pin with a curved edge, allowing you to remove foreign objects from the mine. It usually performs cleaning of exhaust ventilation and intake ducts from debris.
Addition! In particularly difficult cases, hydrodynamic devices can be used, the price of which is quite high. Under this option, deposits in the interior are removed by strong pressure of water.
Detailed process description
Before cleaning the intake ventilation and exhaust ducts will begin, it is necessary to study in detail the basics of the work. Below is a special instruction that describes the whole process from start to finish.
With its help, you can carry out the removal of deposits inside the ducts on their own.
- At the initial stage preparation of the working tool is made.. To the flexible shaft is attached a brush corresponding to the cross section of the pipeline. The drill of sufficient power joins to other end of adaptation.
- The system is divided into specific areas that are directly accessible.. The ventilation grilles are removed and inspection hatches open.
- A flexible shaft with a rigid brush head is inserted into the inside of the communication network.. Its rotation is provided by a conventional drill.
- After cleaning the air ducts, the equipment is cleaned, due to which the forced functioning of the system takes place, if any. Replaced ventilation fine filters, devices for the retention of large particles.
Note! In the course of work, a highly alkaline agent can be used to remove soot, fat and protein contaminants. The solution is applied for 3-5 minutes, then rubbed with a brush and washed off with plain water.
A little about disinfection
This operation belongs to the category of sanitary and anti-epidemic measures, with the help of which it is possible to destroy microorganisms that can cause various diseases in humans. In the course of work, a chemical or physical agent containing a disinfecting agent is used.
To achieve the maximum effect when choosing a basic substance, it is necessary to take into account the characteristics of the object itself, as well as the biological characteristics of the microorganisms present. In addition, the recommendations of chemical manufacturers should be followed.
In the preparation of compounds must comply with safety. All work should be done in rubber gloves to avoid burns. In some cases, you may need safety glasses and a respirator. After preparation of the chemical solution, hands should be washed.
As a conclusion
In order to maintain an optimal microclimate in a residential or any other room, it is necessary to carry out regular work on cleaning the air ducts. Cleaning ventilation from fat deposits and dust in individual houses can be done without the involvement of specialists in this field, thereby saving you money. Familiarization with the video in this article will allow you to better understand the topic, since it reflects the most important information.