Bulk water heater with shower - the criteria for choosing
As you know, in our time comfort is paid the most attention, so even suburban areas without amenities are equipped with interesting structures, one of which is water heaters for gardening - shower is the ideal option, because you do not need running water or natural gas. lines. Consider what modifications can be found on the market and what nuances should be paid special attention.
What requirements must heaters meet?
Regardless of which model you decide to purchase, it is important that it has the following characteristics:
| Security | It is very important that the design has all the required systems to ensure safe operation. This may include protection blocks against closures, and machines, and structures that prevent the inclusion of equipment when there is no water in the tank. Also here can be attributed a system that does not allow the heater to turn on if the shower is in use at the moment. |
| Simplicity | The simpler the operating and maintenance manual, the better. You have to easily do it yourself, especially since most often the installation consists in mounting the structure to the surface and connecting it to the electrical supply network. Maintenance is a periodic inspection for damage and descaling, if it is formed |
| Efficiency | Tariffs for electricity at the dacha are higher than in populated areas. Therefore, you should choose equipment with minimal energy consumption, this criterion is best suited for self-leveling electric water heaters for gardening with a shower, they are much more economical than flow modifications |
| Environmental friendliness | Due to the fact that electricity is used in constructions, all of them do not have a negative impact on the environment, therefore almost all the structures of the group under consideration correspond to this requirement. |
| Attractiveness | Of course, the most important factor is high technical characteristics, but also an attractive appearance is also important, because it is much more pleasant to use a good construction, and not carelessly made with an iron box, albeit an economical one. |
Note! When purchasing products of foreign manufacture, be sure to ask about the availability of documentation confirming the safety of the structure and the admissibility of its operation in our conditions.
Overview of the main functions and features of the connection
To make a self-leveling electric shower for the dacha, it is necessary to make the design or purchase it in finished form or take a separate room, after finishing the walls and floor with moisture-resistant materials and erecting a drain. Next, you can purchase and directly heating the site, which is selected individually, based on the characteristics of your country site.
It should pay attention to a number of design features, which we consider below.
Important system elements
When choosing, close attention should be paid to the following factors:
- The type of power, the simplest and most rational solution is electricity, as it is on most suburban areas, and you will not have any problems with putting the system into operation. It is important that the required voltage is 220 volts, and there is grounding in the connection system, this will increase the safety of the whole structure. (See also the article Marching washbasin: features.)
Note! Some models include both heating with the use of energy from the network, and the use of an internal battery. This allows you to take a shower even in the absence of electricity, the only thing that should not be forgotten is the periodic charging of the battery.
- The possibility of temperature control is also a very important factor, usually the range of adjustments is in the range from 0 to 60 degrees, this is quite enough to ensure the necessary comfort of use. It is also desirable that the heat indicator be present on the panel, so that you, having looked, will know whether the water has heated up or the process is not yet finished.
- The design of the tank is also of great importance, since the efficiency of the system operation depends on this. The greater its capacity, the more water is heated in one cycle, the minimum recommended capacity is 20 liters. Plastic, enameled cast iron or stainless steel can be used as materials. The price of the latter option is the highest, but the reliability and durability meet the highest standards.
Note! It is better to choose structures in which there is space between the body and the tank, especially if they are covered with reflective material. This option creates a thermos effect and allows you to keep the water temperature for the longest possible period of time.
- You can choose such an interesting option as a bulk water heater with a shower and a pump. This design allows you to accumulate a certain amount of water and from time to time to pump it into the system. As noted above, systems with water heating in a tank are much more economical than flow-through systems, so this option can be installed even where there is an established water supply.
- Sometimes the type of construction is important; it can be both standard and horizontal., This is especially true when space is limited and the structure is placed on the roof of a mobile shower.
- Also pay attention to the material of manufacture of heating elements. - it must be made of stainless steel, and the quality of valves - valves must be reliable and of high quality.
Installation requirements
After acquiring a heater, it is important to install it correctly, the work is quite simple, but still you should remember a few important recommendations:
- If the structure will be used outdoors, then all systems and adjustment units must be reliably protected, because it will rain periodically on the heater. The control units must be sealed, the wires used must have reliable insulation. (See also the article Shower tray for the garden: features.)
- It is very important that the system has grounding present, it is required by safety rules and recommends the operating instructions. In addition, if the outlet is located on the street, then it should be reliably protected from moisture and other adverse factors.
- Pay special attention to secure fastening of the container, since if it overturns during operation, there is a high probability of injury. On ordinary products there are special eyelets, on which the container is hung on a wall or other base, horizontal systems are placed on the surface, but they also need to be additionally fixed either with clamps or straps.
- And do not forget to periodically check the design: inspect the insulation on the wires, monitor the status of the control unit and buttons. Do not forget about checking the heating element - if it has scum, you should clean it using special means.
Conclusion
If you want to understand this topic even better - watch the video in this article, it clearly shows some important points and explains the significant nuances in detail.