Crane-water heater: features and principle of operation

09-07-2018
Water supply

Recently, hot water in the apartment or supplied on schedule, or it is not at all. In this case, the installation of an electric water heater of a large volume does not always justify itself and leads to large expenses of electricity. Given this, many craftsmen recommend installing a 2 kW hot water faucet, which can be used both in the kitchen and in the bathroom.

Amateur photo of a similar product in the process of work

Design features

First you need to understand that for such a product must be connected to the electrical network. At the same time, it is best to connect the instantaneous water heater to the faucet through a separate cable using a protective shutdown device. It is in combination with these systems, you can be sure that there will be no overload and the user will not receive injury from electric shock.

Installation scheme of such systems with an indication of all the basic elements

Device

An ordinary portable water heater on the faucet is a complete mixer, inside which is installed an element for heating water. Given this, the dimensions of the product are slightly larger than that of a regular crane.

Some designs of this type can be considered portable and are great for use in the country or in the summer shower

It is worth noting that the instantaneous water faucet works in the same way as a conventional device of this type. At the same time, the water temperature is adjusted once and after that it is enough just to open the shut-off valve. However, it is worth remembering that an active heating element is used, which means that the pressure should not be made too large so that the temperature does not decrease.

Tip! When purchasing such products, you must immediately make sure that they are equipped with the necessary protective devices and have the appropriate certificate. Recently, there have been many fakes that cannot boast of their quality.

The installation process of such products is practically no different from the installation of an ordinary mixer, but it requires compliance with certain rules

Advantages and disadvantages

  • First of all, it is necessary to say that such a product can be used anywhere, as long as there is a connection to the network.. Therefore, it is very often purchased such a water heater with a tap for the garden.
The principle of the internal structure of such structures is quite a post, but it is quite difficult to implement it independently without going beyond the specified dimensions.
  • It is also worth noting that such a device creates the pressure of water of the required temperature in literally five seconds.. At the same time, it does not retain the liquid as a storage water heater with a tap and does not need constant recharge.
  • Special attention should be paid to the dimensions of the device.. The fact is that in its essence it represents a mini water heater on a faucet with very small dimensions. This is especially important in small spaces.
Usually the standard package includes a lot of different elements for the implementation of any type of use.
  • It is important to point out that such a product is very practical and perfectly safe.. It has long replaced an outdated water heater with tap and shower, which is created according to a similar principle.
  • Among the disadvantages of such devices for sink mixers should highlight their high cost.. However, if we consider that this is actually a full-fledged heater, then this price is fully justified.
  • You should also mention the high power consumption.. Usually, all such products use at least two kilowatts per hour. However, this is what provides instant heating.

Tip! Before you purchase a specific model, you must familiarize yourself with its specification and compare it with your needs. This is the only way to appreciate this product and understand its advantages.

Appearance of the temperature controller installed on similar structures

Recommendations of specialists

  • You should not install such systems yourself, as this may require certain skills, and if improperly installed, there is a possibility of termination of warranty service.
Such devices have an original appearance and will perfectly fit into almost any interior.
  • It is strictly forbidden to remove the protective device from the electrical circuit of the product. This may cause electric shock during operation.
  • For each model there is its own instructions for installation and use, which must be studied in detail. In fact, this design should be treated as a full-fledged device for heating water.!
  • Considering that the pressure of water in such systems is usually small, when buying a product it is worth making sure that a special nozzle is installed on the faucet, which sprays the jet, creating a kind of volume and pressure.
A lot of advantages of such devices have long attracted the attention of modern users, who appreciate high quality and level of comfort.

Conclusion

After studying the video in this article, you can get additional data on such devices and their types of sink water heaters. In this case, based on the text outlined above, it is necessary to conclude that such systems do an excellent job with the tasks and in some cases they are much more efficient than other devices.