Hot shower - some options for the device of this design for

02-10-2018
Water supply

Modern man no longer represents his life without the benefits of civilization, and hot water refers to those factors that must be present in order to ensure minimal comfort. As part of this review, we will consider the simplest options for how to make a hot shower in the country, in the bath or even in an apartment during periods when the water is turned off for repairs.

The instantaneous water heater can be used both for a shower or a washbasin, and as a universal solution.

Features of choosing the best option

Currently, there are many modifications of equipment on the market and each of them has its own characteristics and differences. Consider the most popular and popular systems today:

Instantaneous water heaters A universal solution that can be used wherever there is plumbing and electricity. The advantages include factors such as ease of installation with their own hands and high efficiency, the disadvantages are quite high energy consumption, so this group of products is good as a temporary option, but is not suitable for continuous use
Portable Submersible Pumps This type of system is extremely simple: the pumping and heating unit is placed in any container with water. The only thing you need is the presence of an electrical network, a plug is connected to it, and the structure is ready for use, the hose comes with a shower head
Accumulation systems A variant is a container with a heating element installed in it, by means of which water is heated to a certain temperature in a relatively short period of time. The main advantage of this type is a very economical use of electricity and the availability of a stock of warm water.
Use the heat of the sun Suitable for use in country and suburban areas, on the roof of the shower cabin is placed the capacity of a dark color that heats up naturally. The main plus is the free heating of water, and the main disadvantage is dependence on the weather, this option can be used only in the summer time
The use of heat from the stove A solution that is ideal for baths, as the stove in the steam room can also function as a water heater without any problems. The main thing is to make a competent system, below we will look at its features in more detail.

Note! For field and field conditions, you can purchase special designs with heating from gas cylinders and pump operation from batteries or car batteries.

In the photo: many modern versions are initially equipped with a node for connecting to the cigarette lighter of a car.

Overview of some types of structures

For convenience, we consider which systems are most popular in certain conditions, since this factor is fundamental in determining a specific solution.

For home

If you periodically have interruptions in water supply or in the summer period the system is turned off for preventive maintenance for a long time, then you should consider which shower is best for disconnecting hot water:

  • Flow designs are very popular because of the ease of use - you can connect the structure with your own hands in a few minutes, just fasten it to the wall, draw a flexible connection from a cold line and connect to the network. The biggest drawback is the large electricity bills while actively using the system, but if one or two people need to take a shower twice a day, then this modification is ideal.
Flowing systems - a simple solution to a hot water problem.
  • Storage systems are distinguished by the fact that there is a capacity in the structure, and the water is heated in it in advance, this saves electricity. Installation instructions for this type of construction are slightly different from the above options. Therefore, we will not dwell on this issue in detail.
Cumulative design is much larger in size due to the presence of capacity
  • You can use more powerful options in the form of columns or boilers, they are often used with low quality central heating. And remember, if the water in the shower is hot then cold, it speaks primarily about the lack of pressure in the system, which can be caused either by deposits inside the pipes, or by the design features of the communications.

To give

There are several solutions:

  • Portable systems are popular because their price is low and it is easy to use them: lower the transfer unit into a container with water and turn on the device.
  • The version with a summer shower is also good during the warm season, its main advantage is the lack of costs for heating water.

Remember! You can buy a summer shower with built-in heating elements, in which case you can heat the water, even when there is no sun.

TEN in capacity allows not to depend on the sun
  • Bulk heaters are good because they can be attached in any convenient place and use a warm shower even without a water supply network.

For bath

There may be many options from those listed above. We will consider the option of using heat from the stove in the steam room, below is a diagram of the system.

It looks like the flow of hot water in the shower from the oven

The diagram shows everything quite clear, but we will note the most important nuances:

  • Two tanks are needed - for water that will heat up, and for feeding the system. moreover, the feed capacity should be above the cumulative.
  • The system should circulate water in a circle for its uniform heating.
  • All connections must be reliable and thoroughly checked.

Conclusion

In fact, there are much more options for heating water, and it is impossible to consider all of them within the framework of a single review; we have touched on only the most popular systems that are most popular among buyers.

The video in this article will help to understand some issues even better.

Categories